summaryrefslogtreecommitdiffstats
path: root/src/plugins
AgeCommit message (Collapse)AuthorFilesLines
2018-01-18VPP-1122 dpdk/ipsec: fix transport mode pkt lenRadu Nicolau1-3/+7
Change-Id: I6eef2ca258ff5b4aa9b21b98543d814633e295af Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-01-17stn: add vat supportFlorin Coras5-24/+260
Change-Id: Ifba0a4a297b6c01d75b86bc211a32740af5e48ed Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-16acl-plugin: multicore: use pool_init_fixed for per-worker preallocated poolsAndrew Yourtchenko1-1/+7
One worker thread may be processing the packets for session owned by another worker thread. During session access the validity of the pool index is checked - however, the free bitmap pointer might change just at that moment, potentially resulting in a crash. Thus, use the pool_init_fixed() when initializing the per-worker pools, so that the free bitmaps are as well staying in their place. Change-Id: I5796e6b62fdc1efd4299124a388b84a7c0dc19cd Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-01-15fix udp_ping api naming errorGabriel Ganne3-35/+17
Error messages: ERROR:VAPI CPP GEN:Cannot find reply to message `udp_ping_add_del_req' ERROR:VAPI CPP GEN:Cannot find reply to message `udp_ping_export_req' ERROR:VAPI C GEN:Cannot find reply to message `udp_ping_add_del_req' ERROR:VAPI C GEN:Cannot find reply to message `udp_ping_export_req' Api was *_req/*_resp, but when explicitely declared, the reply should then have been *_req_reply. Both api response are empty, so I propose to remove them, and use autoreply API changes: rename udp_ping_add_del_req -> udp_ping_add_del rename udp_ping_export_req -> udp_ping_export delete udp_ping_add_del_reply (empty response) delete udp_ping_export_reply (empty response) vl_api_version 1.0.0 ->2.0.0 Change-Id: Id3456c8101a7689fbc56dc2d9076625c2b3af0ad Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2018-01-15Marvell device pluginDamjan Marion10-0/+1535
Depends in musdk 17.10 [1], tested on MACCHIATObin [2] board. currently only coves PP2. musdk must be compiled with: ./configure --enable-bpool-dma=64 [1] https://github.com/MarvellEmbeddedProcessors/musdk-marvell [2] http://macchiatobin.net Change-Id: I0247a6b860b0a067c54190eae0bd3fe08de234ad Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-13Improve "show xxx tunnel" and "show int addr" outputJohn Lo1-7/+7
Improve "show xxx tunnel" output functions format_xxx_tunnel() for GRE, VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels to make their output more consistent and provide better information. Improved the output of "show int addr" to make its info more consistent with tunnels and provide fib-index info. Change-Id: Icd4b5b85a5bec417f8ee19afea336c770ad3b4c5 Signed-off-by: John Lo <loj@cisco.com>
2018-01-11api: remove transport specific code from handlersFlorin Coras5-200/+193
This does not update api client code. In other words, if the client assumes the transport is shmem based, this patch does not change that. Furthermore, code that checks queue size, for tail dropping, is not updated. Done for the following apis: Plugins - acl - gtpu - memif - nat - pppoe VNET - bfd - bier - tapv2 - vhost user - dhcp - flow - geneve - ip - punt - ipsec/ipsec-gre - l2 - l2tp - lisp-cp/one-cp - lisp-gpe - map - mpls - policer - session - span - udp - tap - vxlan/vxlan-gpe - interface VPP - api/api.c OAM - oam_api.c Stats - stats.c Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-11Remove vpp_api_test interface name filter catalogDave Barach1-0/+1
If I remember correctly, I added the interface name filter catalog to avoid cluttering up the vat interface table with [unused] packet generator interfaces. Since we no longer create pg interfaces we're not planning to use, the filter catalog does more harm than good. Every new interface name prefix would have had to be added to the list, and folks wouldn't likely know they should do that... Change-Id: I4067f8ba70ad13c8dc5ebaf21a23759a2cf2675e Signed-off-by: Dave Barach <dave@barachs.net>
2018-01-11VPP-1131: doxygen: Documentation for Debug CLI stops at src/plugin/l2eBilly McFall1-3/+3
Change-Id: I3ce014da7b514aa766a90cacddd76cd2247406a8 Signed-off-by: Billy McFall <bmcfall@redhat.com> (cherry picked from commit bbdfeaebf25525a55d9a87ba4c0f789c176cc7bf)
2018-01-11NAT44: asymmetrical load balancing static mapping rule (VPP-1132)Matus Fabian5-22/+38
Add option to NAT44 load balancing static mapping API/CLI to make rule asymmetrical (rule match only in out2in direction). Change-Id: I325ecef5591e4bf44ce4469a24d44fe56c3bb2e9 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-01-11Add basic support for DS-Lite CE (VPP-1059)Juraj Sloboda11-13/+683
Change-Id: Ifcca60da3f77c0a4959f98b3365c846badbdc2d0 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-01-10Fix stn rules dump api (VPP-1123)Florin Coras1-20/+25
Change-Id: If9e9e4fc348d20396713d9017100dda63a107edb Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09Patch ENA PMD to skip setting tx flags in rx pathMatthew Smith1-1/+1
On rx, the ENA PMD sets tx offload flags based on the received packet's l4 protocol. This means you need to turn off those offloads for every packet if you encapsulate packets arriving on an interface using that PMD. Disable this behavior. Change-Id: Icae9f32e3d292d767da440ae5c1280902bdaa083 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-01-09memif: fix coverity divide by zeroSteven1-0/+1
Coverity complains about divide by zero if tx_queues gets the value of 0 from the macro vec_len(). While we don't anticipate such condition to happen, programming errors may exist. To defend against divide by zero, crash and burn if tx_queues gets a value of 0. Change-Id: I65e014c07e9d4adfe119d5b373b5dc24cb818a03 Signed-off-by: Steven <sluong@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras9-71/+60
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-08NAT64: IPFix (VPP-1106)Matus Fabian7-23/+1337
Change-Id: Ib90dc5613c9fdac0344b3bd7f163e2f7163c64d8 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-01-08NAT: fixed get_worker_out2in bug (VPP-1116)Matus Fabian2-4/+12
Change-Id: I5e080d69f28661cc0b1846885d5001526b54fbd9 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-01-05Unify and cleanup usage of hash_set/unset_mem by various tunnelsJohn Lo1-26/+7
Move the functions hash_set_key_copy() and hash_unset_key_free() which are dupilicated in various tunnel support code modules to hash.h as hash_set_mem_alloc() and hash_unset_mem_free() to be used by all. Change-Id: I40723cabe29072ab7feb1804c221f28606d8e4fe Signed-off-by: John Lo <loj@cisco.com>
2018-01-05Add support for 464XLAT NAT44 mode (VPP-1045)Juraj Sloboda7-7/+166
Change-Id: I24e7a26972bbbfcea100292b212b29ae7a349335 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-01-03NAT64: free port when dynamic BIB deleted (VPP-1107)v18.04-rc0Matus Fabian6-39/+46
Change-Id: Id897ed61a26a4069678ed4ddac1ba28bf32809c3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-12-21VPP-1109 Fix loop for some CLI (code review)Swarup Nayak2-0/+4
Change-Id: I518387ab479bee4778d45a33c95f7b0f72aa1b72 Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
2017-12-20L2 emulation: remove usued ip-table-id from APINeale Ranns1-1/+0
IP table mapping is set using 'set int ip table X Y" Change-Id: I2adec40015f9281c9b00c55506000b322f42d91a Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-12-20acl-plugin: add a debug CLI to print 5-tuple structure in human readable ↵Andrew Yourtchenko3-0/+33
format from hex representation Even though the trace now prints the hex as well as human readable format for acl plugin, it can be handy to have a separate function which allows to decode the hex. So add this debug CLI. Change-Id: I1db133a043374817ea9e94ae3736b8a98630669d Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-12-20L2 EmulationNeale Ranns8-0/+803
L2 Emulation is a feautre that is applied to L2 ports to 'extract' IP packets from the L2 path and inject them into the L3 path (i.e. into the appropriate ip[4|6]_input node). L3 routes in the table_id for that interface should then be configured as DVR routes, therefore the forwarded packet has the L2 header preserved and togehter the L3 routed system behaves like an L2 bridge. Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-20fix kubeproxy some testsGabriel Ganne2-2/+41
* NAT46: fix test cleanup, missing del keyword * NAT66: fix kube-proxy vip, is ipv6 * add some missing kp_put_writer_lock * wipe flowtable after each unit test * Add new cli api: "test kube-proxy flowtable flush" to flushes everything * Call this new cli function after the end of each kube-proxy unit test. * same as commit b3d1b203579226ca5136b9d6a2744577d07cfcc6 for the lb plugin Change-Id: I4146f44841328ec96eb66729e3bae3d40f33e4aa Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-12-20Translate matching packets using NAT (VPP-1069)Juraj Sloboda6-48/+238
Add API function which enables forwarding of packets not matching existing translation or static mapping instead of dropping them. When forwarding is enabled matching packets will be translated while non-matching packets will be forwarded without translation. Change-Id: Ic13040cbad16d3a1ecdc3e02a497171bef6aa413 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2017-12-19NAT: Twice NAT44 (VPP-969)Matus Fabian6-783/+821
Translation of both source and destination addresses and ports for 1:1 NAT session initiated from outside network (ExternalIP K8 use case). Change-Id: Ic0000497cf71619aac996d6d580844f0ea0edc14 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-12-18NAT: Add performance testing TRex scripts and config (VPP-832)Matus Fabian13-0/+426
Change-Id: I149a20f183b836db4c32fb4e4a8438b3a14c1c26 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-12-18Fix nat44 identity mappingDave Barach1-0/+5
Set l_addr to the interface address if the interface address is known when the identity mapping is created. Change-Id: I61af0f5248c9d86d23a24457b342b2e1fb4ac726 Signed-off-by: Dave Barach <dave@barachs.net>
2017-12-18Support kube-proxy data planeHongjun Ni11-0/+3594
This plugin provides kube-proxy data plane on user space, which is used to replace linux kernal's kube-proxy based on iptables. The idea is largely inspired from VPP LB plugin. Currently, kube-proxy plugin supports three service types: 1) Cluster IP plus Port: support any protocols, including TCP, UDP. 2) Node IP plus Node Port: currently only support UDP. 3) External Load Balancer. Please refer to kp_plugin_doc.md for details. Change-Id: I36690e417dd26ad5ec1bd77c7ea4b8100416cac6 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-12-16Use crc32 wrapper (VPP-1086)Gabriel Ganne1-6/+6
This allows arm platforms to also take advantage of crc32 hardware acceleration. * add a wrapper for crc32_u64. It's the only one really used. Using it instead of a call to clib_crc32c() eases building symmetrical hash functions. * replace #ifdef on SSE4 by a test on clib_crc32c_uses_intrinsics. Note: keep the test on i386 * fix typo in lb test log Change-Id: I03a0897b70f6c1717e6901d93cf0fe024d5facb5 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-12-16dpdk: unset ETH_TXQ_FLAGS_NOXSUMS only for selected PMDsDamjan Marion1-5/+8
Change-Id: I1699e440052faa317b06d46692e8656a41d21bfe Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-14pci: auto-detect right vfio/uio driverDamjan Marion1-1/+1
Change-Id: Ib4012ff598698924484525932d041988cc4c63f6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-14Enable AWS ENA PMDMatthew Smith3-1/+13
Elastic Network Adapter PMD for newer AWS instance types Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-12-14NAT64: fix coverity (VPP-1032)Matus Fabian2-0/+4
CIDs 180713 and 180714 Change-Id: Ia4856d1a62f176e99983f8c82eaa09d5df9d4ca5 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-12-13NAT64: multi-thread support (VPP-891)Matus Fabian15-505/+1263
Change-Id: Iebf859b6d86482e4465423bad598eecf87e53ec4 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-12-13NAT: DS-Lite AFTR tunnel endpoint address respond to ICMPv6 echo request ↵Matus Fabian1-3/+8
(VPP-1090) Change-Id: I361c043979274eac1aefcd95abdf1624a3ef2756 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-12-11acl-plugin: unapply/reapply the classifier-based inacls when performing ↵Andrew Yourtchenko1-1/+29
macip_acl_add_replace on an existing MACIP ACL The classifier tables layout might (and most always will) change during the MACIP ACL modification. Furthermore, vnet_set_input_acl_intfc() is quite a picky creature - it quietly does nothing if there is an existing inacl applied, even if the number is different, so a simple "reapply" does not work. So, cleanly remove inacl, then reapply when the new tables are ready. Also, fix the testcase which was supposed to test this exact behavior. Thanks to Jon Loeliger for spotting this issue. Change-Id: I7e4bd8023d9de7e914448bb4466c1b0ef6940f58 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-12-11call unformat_free in some flow, remove unnecessary callsSwarup Nayak1-8/+0
Change-Id: I565277eafbce3d4f59a7f0d497fca1c4fed3cfc8 Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
2017-12-09vlib: PCI rework to support VFIODamjan Marion3-60/+74
Also fixes old ixge driver, so it works with recent physmem changes and vfio. Change-Id: Id4be74b34daed47cd281a77eec43d6692340d882 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-06Restructure some files in LB to src/vnet to reuseHongjun Ni4-111/+1
Change-Id: Ic8b193e93ce18ca82b294816aa7ee0ef31d64bc2 Signed-off-by: Pierre Pfister <ppfister@cisco.com> Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-12-05dpdk/ipsec: multiple fixesSergio Gonzalez Monroy5-105/+126
- fix ESP transport mode - safely free crypto sessions - use rte_mempool_virt2phy/rte_mempool_virt2iova - align DPDK QAT capabilities for IPsec usage (DPDK 17.08) - reserve 16B for aad (reference cryptodev doc) Change-Id: I3822a7456fb5a255c767f5a44a429f91a140fe64 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-12-05dpdk:remove duplicate codeEyal Bari1-11/+8
unify code from both branches Change-Id: Iae7325cff8c799c7827727ad7465bec089e39f50 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-04dpdk: remove unused "use_rss" flagEyal Bari2-7/+0
Change-Id: I31d2cbb02a0f59603ef1adc0d185e3d775dfda2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-04dpdk: remove duplicate functionEyal Bari1-32/+1
dpdk_rx_next_from_packet_start is equivalent to dpdk_rx_next_from_etype and seems to have no side effects Change-Id: I629dadfbfb35ad1f5c7198e7824883ae4bd6abaa Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-04dpdk: remove unused cached eth input nodeEyal Bari2-10/+0
Change-Id: Ic43c70bfe3e93cb3e6cfab7cda1986e44e371c06 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-12-01acl-plugin: fix coverity 177970-177973,178891, and incorrect reset of ↵Andrew Yourtchenko1-13/+33
dot1q/dot1ad classifier mask 17797[1-3] have been a false positive in the optional debug CLI argument handling, 178891 was triggered by an unnecessary use of memcpy. Also fix the issue reported by khers (thanks!) - since 178891 was in the same place. Change-Id: I3a804e2b1d25d74c11fcc389020d2c1fd69902b2 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-11-30NAT44: identity NAT (VPP-1073)Matus Fabian3-7/+301
Identity mapping translate an IP address to itself. Change-Id: Icc0ca5102d32547a4b0c75720b5f5bf41ed69c71 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-11-30Fix variable mismatchJuraj Sloboda1-1/+1
Change-Id: Iae2f9f9652cecdf7e754700b2fe107ad61ff8ff9 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2017-11-29NAT: Remove old SNAT API (VPP-1070)Matus Fabian3-2114/+221
Change-Id: I3d936d456ee27b2e0857843295efb60a9f2d0be7 Signed-off-by: Matus Fabian <matfabia@cisco.com>