summaryrefslogtreecommitdiffstats
path: root/src/plugins
AgeCommit message (Collapse)AuthorFilesLines
2018-10-03VPP-1440: clean up coverity warningsDave Barach1-2/+2
Change-Id: Ie315d4e83c0575d82aee0369ef50e8dd2dad6a2a Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-03vmxnet3: error handlingSteven4-60/+84
outbound -- if we have to drop the packet due to no descriptor space is available, drop the whole packet, not fragments. inbound -- check and drop error packets Change-Id: Ida1d32e61521bafd67f714d729ad53cd7c487dc6 Signed-off-by: Steven <sluong@cisco.com>
2018-10-02VPP-1440: clean up coverity warningsDave Barach2-5/+8
Change-Id: Ic6823fb617ecae547a5f0e28b1e037848e40f682 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-02Update code to compute checksum for buffer chainsJuraj Sloboda2-6/+10
Compute ICMP checksum for buffer chains Fix checksum function for buffer chains Change-Id: I39b845b94a63c3ab5fc9f6f9ab36cadbc67c104f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-02tls: fix disconnects for sessions with pending dataFlorin Coras2-20/+20
TLS can enqueue events to itself when app session queue cannot be entirely drained. If a pending disconnect is handled before any such event, session layer may try to dequeue data on deallocated sessions. Change-Id: I5bfc4d53ce95bc16b6a01e1b0e644aafa1ca311b Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-01Source VRF SelectNeale Ranns7-0/+1141
match against a packet's source address to determine the VRF for the subsequent destination address lookup. Change-Id: I48ee0ef54dcb891f0ec7f879e4d3b925a0ed0081 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-01Rename device class from PPPPOE to PPPoEPaul Vinciguerra2-10/+10
Change-Id: Ia20eee6cef360b1acd768101df0713f0005a7d14 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-10-01thread: Add show threads apiMohsin Kazmi3-3/+3
Change-Id: I3124238ab4d43bcef5590bad33a4ff0b5d8b7d15 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-10-01IGMP: handle (*,G) report with no source addressesNeale Ranns1-8/+14
Change-Id: I363370b9d4a27b992bad55c48fc930a2fbea2165 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-28MAP: Add check for well known ports.Ole Troan1-0/+8
And more unit-tests. Change-Id: I4667d82d928b7ba8d96b5a5648d464115b3ed216 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-27MAP: Correctly print ea-bits-len in map commands.Ole Troan1-1/+1
Change-Id: I17b19875547cd6056aaf8f8fde439caa8e42d274 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-27MAP: 64-bit DMROle Troan2-17/+15
Change-Id: I261e11f1006039e4a4019fec2fd3271763ae476a Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-27dpdk_plugin: fix mlx5 build and runtime issuesSirshak Das1-2/+10
There are issues with VPP finding and linking the mlx5 shared glue library which was built by default if mlx5 was enabled. Runtime Errors this patch fixes: net_mlx5: cannot load glue library: librte_pmd_mlx5_glue.so.18.05.0: cannot open shared object file: No such file or directory net_mlx5: cannot initialize PMD due to missing run-time dependency on rdma-core libraries (libibverbs, libmlx5) This patch introduces additional config parameter to disable glue library building and instead statically link ibverbs and mlx5 libraries to the PMD and dpdk_plugin. Change-Id: I0b2f67652a57854c778e991780903fb15706ace8 Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
2018-09-27add cmake build option to build openssl asyncPing Yu1-0/+11
This code is orignally in automake, but it is missing in cmake. Thus add it to make openssl async work in cmake build system Change-Id: Ie69ee9c2099273e51ce13ccab27bdd2619db4814 Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-09-27avf: may crash if failed to allocate buffers to ringSteven1-1/+1
In avf_rxq_refill, we invoke vlib_buffer_alloc_to_ring which may fill buffers from the end of the ring and continue to the beginning of the ring. If we fill some in the end and continue to fill some in the beginning, but does not have enough buffers to fill the whole request, n_alloc returns a value which is not equal to n_refill to indicate partial refill. We don't like partial refill and invoke vlib_buffer_free to get rid of the buffers that just got refilled. However, vlib_buffer_free API is to free the buffers from the slot continuously. It does not know how to free some from rxq->bufs[slot], and then continue to free the rest when it reaches the end of the ring. The fix is to use vlib_buffer_free_from_ring which is smart enough to figure that stuff out. Change-Id: I93c28e0b0d8d8f22c321d1a5912e00c27b4e2e8d Signed-off-by: Steven <sluong@cisco.com>
2018-09-27IPIP and IPv6 fragmentationOle Troan4-19/+4
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1 Leading to crash for ICMP generated on tunnelled packets - Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so IP in IPv6 packets never got fragmented. - Add support for fragmentation of buffer chains. - Remove support for inner fragmentation in frag code itself. Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-26vmxnet3: delete interface causes a crashSteven1-9/+4
Need to free the buffers starting from ring->consume+1, not ring->consume Make use of the cool API vlib_buffer_free_from_ring Fix a memory leak in vmxnet3_txq_init Change-Id: I0a539ea75211408d84ce433d97a0a0aec5a9618d Signed-off-by: Steven <sluong@cisco.com>
2018-09-26acl-plugin: fix the stateful ICMP handling and add testcasesAndrew Yourtchenko1-39/+40
The stateful ICMP/ICMPv6 handling got broken. Fix that and introduce testcases to catch in the future. Change-Id: Ie602e72d6ac613d64ab0bf6693b6d75afb1a9552 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-26dpdk: fix QSFP+ module infoDamjan Marion1-1/+2
Change-Id: I89c7df778e66a5d2147190dc99445405d81964e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-26NAT44: endpoint-dependent mode session timeout improvement (VPP-1423)Matus Fabian2-0/+28
Change-Id: Ib62e503f4eb5d72431288de32f417a4553df4e0c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns1-2/+2
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-25dpdk: show pluggable info in 'show hardware'Damjan Marion2-2/+30
module: id SFP/SFP+/SFP28, compatibility: 40g_active_cable vendor: Amphenol, part NDCCGF-I202 revision: C, serial: APF1711202351C, date code: 170318 cable length: 2m Change-Id: Ife35607b4f078f7b56737fe066ad4cbd247a7504 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-25acl-plugin: optimize session idle timer checksAndrew Yourtchenko5-32/+93
This commit adds explicit signaling from a non-owning thread to the owning thread to restart the session timer as necessary. Consequently, we now can sweep the session lists at their respective timeouts, rather than sweeping all the lists at the pace of the shortest timeout value, just taking care to wake up if the session requeue to a different list results in needing to wake up earlier. Change-Id: Ifc8c500f6988748f4cd3dc184dd7824321aaaaca Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-25vmxnet3: guard against array overflowSteven1-2/+3
Under extreme condition, it is possible for input node to have more than 256 packets available to process. Add a check to the while loop to prevent overrun buffer_indices and nexts. Change-Id: Id9830e5c254f04216eb79e864a5460e08cf2e4e5 Signed-off-by: Steven <sluong@cisco.com>
2018-09-25NAT44: fix nat44_o2i_ed_is_idle_session_cb (VPP-1424)Matus Fabian2-4/+1
Change-Id: I47e1fc789ddf3dbfdf9768b99d5c3a8804d6b750 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-24NAT44: endpoint-dependent mode session timeout improvement (VPP-1423)Matus Fabian4-27/+63
Change-Id: I630f3da1ea4e6e50a50f1352c097becef1efe3c0 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-24nsim: fix multiple definitions of nsim_nodeDamjan Marion2-3/+1
Change-Id: Iedd79eeba35fb7385c03a177f8ac7d3ddfeb6a84 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-24avf: rename interface nameDamjan Marion2-2/+2
Change-Id: I4a1dca92a69547f8b26e9aec7574332f39e43c37 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-24Network delay simulator pluginDave Barach9-0/+1522
Change-Id: I4a70c7df8f0cb368a4e1cb16f30eeef5c6058c79 Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra44-91/+91
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-24LB: fix flush flow table issueHongjun Ni5-69/+90
Change-Id: Ib0a06ab71aed42eb5bb2ab2edf4844b2167e0610 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-09-21vmxnet3: Add hardware link status handlingSteven6-8/+66
Added an interrupt line for monitoring and notifying hardware link status Displayed additional information for show hardware for vmxnet3 interface Fixed possible garbage display on interface name for show vmxnet3 Change-Id: If457bfe7c216287fb3a4e2630f00434d595f387b Signed-off-by: Steven <sluong@cisco.com>
2018-09-21NAT: Refactoring / Housekeeping (VPP-1415)Matus Fabian19-10848/+11482
Change-Id: Ia3ce24cc94f9b2fb331ad62a4181ddcd41bc78ca Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-20NAT44 virtual fragmentation reassembly for endpoint-dependent mode (VPP-1325)Juraj Sloboda6-147/+1296
Change-Id: I36ece2ef2eaef9fa559d69ec7f7f07e7c16a7a9d Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-09-20vmxnet3: invoke vlib_buffer_enqueue_to_next() with the wrong buffers for ↵Steven1-7/+8
chain buffers If we invoke the subject API with 2 buffers, each with 2 chains, the content of buffers[0] should be head of 1st buffer, and content of buffer[1] should be head of 2nd buffer. What the code did was to put buffers[0] = head of 1st buffer buffers[1] = next chain of 1st buffer buffers[2] = head of 2nd buffer buffers[3] = next chain of 2nd buffer This is wrong and can cause crash. The fix is to only increment bi when the entire packet is found which may consist of multiple fragments. Change-Id: If02cd5186a039d7a6c08a0959112840bdb242317 Signed-off-by: Steven <sluong@cisco.com>
2018-09-19dpdk: mask and warn if rx/tx offload is not availableDamjan Marion4-94/+115
Warning messsage is displayed in system log: vpp# show log 1970/ 1/ 1 01:00:01:198 warn dpdk unsupported rx offloads requested on port 0: scatter Change-Id: I40021066daf2d37ca5233e3adce55e412f0d3932 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-19nat: free port_bitmapdongjuan1-0/+7
Change-Id: Ied0fc50f1afb0f7fc563784544699726a6d03380 Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
2018-09-18vmxnet3: add support for "non-default" next nodeSteven3-2/+76
Support feature arc Support set interface next node Enqueue packet to either ip4, ip6, or ethernet_input based on packet type Change-Id: I11fb6bba98ee0bfa1d057474fc6cf3be48ef1c48 Signed-off-by: Steven <sluong@cisco.com>
2018-09-18disable scatter/gather for ENA with DPDK 18.08Matthew Smith1-1/+5
The scatter/gather rxmode flag was set for ENA when building against DPDK >= 18.08. ENA does not support this, so disable it. It looks like enabling it was a copy/paste error. Also, after offloads are adjusted based on whether "no-multi-seg" is set, those configurations are overwritten by copying port_conf_template over the port config. That should only happen for versions of DPDK older than 18.08 because 18.08 and newer make changes directly on the port config instead of making changes to the template. Make the clib_memcpy() conditional on the DPDK version being less than 18.08. After doing so, compiler errors complain about port_conf_template being declared but not used, so make it's declaration conditional. Change-Id: If81980d71c379a565b51dd700b953f8c811a8703 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-09-16Register cdp_input when enabled for the first timeDave Barach3-26/+42
Graceful handling of unknown tlv types Change-Id: Idbc9ed524fc8b865c8e12571813cc73548bde480 Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-16vmxnet3: fix clang initialization errorFlorin Coras1-1/+2
Change-Id: I2958bd3bdec98d3e380a8ff8f970563020e28afd Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-16fix nsh map index error, it will cause vpp appear Segmentation fault when ↵zhanglimao1-1/+1
vpp process double packages Change-Id: Ib32bb351356b84aaf696c57398610b52a5a1f4dd Signed-off-by: zhanglimao <zhanglimao0017@gmail.com>
2018-09-15tls: fix openssl engine write complete conditionFlorin Coras1-1/+1
Change-Id: Ic1526f6916970ce2b0c4fc0d148d4396fa629b5f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-14vmxnet3 device driverSteven Luong14-0/+3173
Implemented vmxnet3 deivice driver for VMWare ESXi. Tested with Ubuntu 18.04 connected to ESXi 6.0 Ubuntu-18.04 (VPP) --- ESXi-6.0 Change-Id: I85fbc86f2d8532b017bc4271612d17e24e498e4d Signed-off-by: Steven Luong <sluong@cisco.com>
2018-09-14dpdk: add detection of mellanox PMDsDamjan Marion1-0/+10
Change-Id: I523fc489f5e73ba726ab0711eab3fdde53dc35e8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-14acl-plugin: do not do clib_smp_atomic_add on per-worker countersAndrew Yourtchenko1-2/+2
Just do a regular increment, since we are not contending for these counters. This also makes the tests pass on ARM ThunderX (VPP-1395). Change-Id: I333aaa11d4145d13d322868900bc114df85a020d Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-13Add a polling configure to make thread bind with hardware enginePing Yu1-4/+9
Change-Id: Ib4130098dd9bf45370bdee9a04e4804074df58b1 Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-09-13NAT: TCP MSS clampingMatus Fabian9-0/+236
NAT plugin changes the MSS value in TCP SYN packets to avoid fragmentation. If the negotiated MSS value is greater than the configured value it is changed to the configured value. If the negotiated MSS value is smaller than the configured value it remains unchanged. Change-Id: Ic3c4f94a2f1b76e2bf79f50f3ad36a4097f3f188 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-12fix bihash test codeDave Barach1-0/+7
Change-Id: Ie71b99385c33122cbf55f80ebabdc2ccdb4cf2ae Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-12Always use 'lib' instead of 'lib64'Damjan Marion1-3/+2
It is packaging responsibility to put libs in the right place. Use of lib64 resulted in huge amount of files with hardcoded lib64. This patch simplifies things... Change-Id: Iab0dea0583e480907732c5d2379eb951a00fa9e6 Signed-off-by: Damjan Marion <damarion@cisco.com>