Age | Commit message (Collapse) | Author | Files | Lines |
|
Improve igmp membership report performance, introduce group and source specific timers.
(side effect compatible with Group-specific query).
Change-Id: Ie3dd2c0dabe5f7138c2f8029e6bbbbfcb5e4904f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
[VPP-1251]
Problem:
When the bond subinterface is removed, it was observed that we lost the lacp
partner. Show hardware shows rx counter goes up, but show interface does not
for the slave interfaces.
Cause:
We reset the interface promiscuous mode when the bond subinterface is deleted.
This causes dpdk not to accept any packet. Leave the interface in promiscuous
mode fixes the problem.
Other fixes:
There are few places we use hw_if_index as if they are sw_if_index. But they
don't necessarily have the same value. As soon as a subinterface is created,
they start to diverge. The fix is to use the correct API for the hw_if_index
and sw_if_index.
Change-Id: I1e6b8bca0a4aae396d217a141271cbf968500c91
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 42c6599bf3057a7e8f4f00f5b6a9dd72af48d283)
|
|
Change-Id: I228728bacfca6056dc409a96de1bffb9cadcd3e6
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
We should be sending LACP PDU every second if the partner has LACP_TIMEOUT flag
set which means it will time us out in 3 seconds.
Add interface name for lacp trace
Change-Id: If7d816c062d03e80cc0dd7d10dba0b76ace0664a
Signed-off-by: Steven <sluong@cisco.com>
|
|
When enabled then Twice-NAT is applied only when
source IP equals destination IP after DNAT
Change-Id: I58a9d1d222b2a10c83eafffb2107f32c1b4aa3a8
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
- use of vlib_log for non-dataplane logging
- redirect of dpdk logs trough unix pipe into vlib_log
- "show dpdk physmem" cli
Change-Id: I5da70f9c130273072a8cc80d169df31fc216b2c2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7e6b0e7e91cc032b1685f35de5d84363a85158a5
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
https://gerrit.fd.io/r/#/c/7701/ accidentally removed 3 lines of code in
dpdk/device/init.c which were added by https://gerrit.fd.io/r/#/c/7826/
case VNET_DPDK_PMD_VHOST_ETHER:
xd->port_type = VNET_DPDK_PORT_TYPE_VHOST_ETHER;
break;
Those lines were needed to recognize vhost-user interface which is created
via vdev command in dpdk and display VhostEthernet. Without them,
UnknownEthernet is displayed.
Change-Id: I6d7ee6aecc6a415fbb7308595d515649475bcd5f
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I3792c524323ce9e300648abe85454cff5d19aba7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0d10f13a56420b119fdfad97dcc135b245c269e1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
A poor man's flow switching or policy based rounting.
An ACL is used to match packets and is associated with a [set of] forwarding paths
that determine how to forward matched packets - collectively this association is a
'policy'.
Policies are then 'attached', in a priority order, to an interface when thaey are
encountered as an input feature. If a packet matches no policies it is forwarded
normally in the IP FIB.
This commit is used to test the "ACL-as-a-service" functionality,
which currently compiles, and the existing traffic ACL tests pass in both hash and linear modes.
Change-Id: I0b274ec9f2e645352fa898b43eb54c457e195964
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
It is a relatively rarely used low level command for code that didn't change,
but due to infra changes it did not survive. Having it working may be very
useful for corner-case debugging. So, fix it for working with
the acl-as-a-service infra.
Change-Id: I11b60e0c78591cc340b043ec240f0311ea1eb2f9
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 18bde8a579960aa46f43ffbe5c2905774bd81a35)
|
|
Change-Id: I071d4cfcf6ea9763dd4842a3594c486a8e400e8c
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
only in lookup context 0
In process of extracting the matching out of the ACL plugin internals,
a couple of pieces setting the miscellaneout fields in the 5tuple structure
did not make it, so they are initialized to zeroes. Move the assignments
to the right place to make both traffic acls and acl-as-a-service working.
Change-Id: I66a7540a13b05113b599f0541999a18fad60385d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit d3b96ef0d75889f09dc51efb89e5123cdbe7ffe8)
|
|
Change-Id: Id5a2a90d81cc9cb87cb6fb89ac2f4ca3cbcb51e2
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
update the GBP plugin to implement the full NAT feature set of opflex agent
Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I994649761fe2e66e12ae0e49a84fb1d0a966ddfb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
When in deterministic mode disable nondeterministic CLI/API.
When not in deterministic mode disable deterministic CLI/API.
Change-Id: Ibf485c14612297e51d3815a6fde541542c8fe7ab
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
When NAT44 forwarding is disabled, if a DHCP server-to-
client packet arrives on an outside interface, it is
handled correctly by setting the next node to the next
feature on the ip4-unicast feature arc, where it can be
processed.
When NAT44 forwarding is enabled, if a DHCP server-to-
client packet arrives, it is not handled any differently
than other packets and ends up going to ip4-lookup
which results in the packet being dropped.
Move the check for DHCP server-to-client packets outside
of the block that is executed if forwarding is disabled so
DHCP replies will be processed in either case.
Change-Id: Ia795cce3fd459f3252c2c17d53bb88ceaeaafca4
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ieeafb41d10959700bfd434cd455800af31944150
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
The users of ACL lookup contexts might not check the data they supply,
so do it on their behalf in this function, and return an error if
an ACL does not exist or if they attempt to apply the same ACL twice.
Change-Id: I89d871e60f267ce643f88574c83baf9cd0a2d7b3
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit e5cbccf35f4d230afafa633abbc88e64ef33d758)
|
|
using the inline functions
The acl_main struct, which is defined in the acl_plugin, is not visible when
the ACL plugin inline code is being compiled within the context of other plugins.
Fix that by using the global pointer variable, which exists in both the ACL plugin
context and is set in the context of the external plugins using ACL plugin.
Change-Id: Iaa74dd8cf36ff5442a06a25c5c968722116bddf8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 1286a15a6e60f80b0e1b349f876de8fa38c71368)
|
|
Change-Id: If536ae142dc0109b587d92981d337bc6f15e070a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
lb session with the same user maybe deleted.
Change-Id: Ie58579cf4f8babb594f3c44aa185720134c58c3d
Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
|
|
Change-Id: I6400b77de388c01e85209e5dc5f11ccafb79a459
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
Change-Id: Iaadfbc75832e37ae52511b25448da14116214fc1
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Change-Id: I32f68e2ee8f5d32962acdefb0193583f71d342b3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I71660eb327124179ff200763c4743cc81dc6e1c6
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Id775efb2e85d850e510d00f1b48bb711a3342397
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I92ca28d3007f7ea43cd3e8b20659e400dfa6c75c
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Ibcffee7d20dbb79720199bcd82d2353f39d5544f
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I65306fb1f8e39221dd1d8c00737a7fb1c0129ba8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia99490180683e8649784f7d9d18c509c3ca78438
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I32b30210c2f1aec10a1b614d04f427662326a3d2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ifb4d23059b7989c32a52eaf0c25c275b35e83010
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
dpdk-input was dropping packets with bad ip-checksum on l2 interfaces
Change-Id: Ife5b52766bb71e878b1da6e94ae7b8a1e59fc478
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
(re-)applied
There were several discussions in which users would expect the sessions to be deleted
if the new policy after the change does not permit them.
There is no right or wrong answer to this question - it is a policy decision.
This patch implements an idea to approach this. It uses a per-interface-per-direction counter to designate
a "policy epoch" - a period of unchanging rulesets. The moment one removes or adds an ACL applied to
an interface, this counter increments.
The newly created connections inherit the current policy epoch in a given direction.
Likewise, this counter increments if anyone updates an ACL applied to an interface.
There is also a new (so far hidden) CLI "set acl-plugin reclassify-sessions [0|1]"
(with default being 0) which allows to enable the checking of the existing sessions
against the current policy epoch in a given direction.
The session is not verified unless there is traffic hitting that session
*in the direction of the policy creation* - if the epoch has changed,
the session is deleted and within the same processing cycle is evaluated
against the ACL rule base and recreated - thus, it should allow traffic-driven
session state refresh without affecting the connectivity for the existing sessions.
If the packet is coming in the direction opposite to which the session was initially
created, the state adjustment is never done, because doing so generically
is not really possible without diving too deep into the special cases,
which may or may not work.
Change-Id: I9e90426492d4bd474b5e89ea8dfb75a7c9de2646
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Coverity has started whining about uint32_t missing in this .h
Change-Id: I57992121c0593d6a0ada35917802d0300cf91259
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Do fast-rate if we are not yet synchronized with the partner.
Stop sending LACP updates as a flash in the worker thread. Just expire the
timer and let the lacp_process handle sending LACP PDU.
Change-Id: I8b36fe74e752e7f45bd4a8d70512c0341cc197a1
Signed-off-by: Steven <sluong@cisco.com>
|
|
xd->flags is set incorrectly when a slave link is down in bonded interface mode.
This can result in VPP crash when data traffic flows to the interface.
Change-Id: Ideb9f5231db1211e8452c52fde646d681310c951
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Static mapping is not deleted from resolution vector after address is set on
interface.
Change-Id: Ib7c45ca2e307123d101248c5a1b17d130ac32cd0
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I9a0105aa2373bd4db218851b1bbee50c6b6dfc7d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
worker (VPP-1213)
Change-Id: I8e0c7ed2ff462b9ab59c233f56be262ec03c29ff
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
- autosize the ACL plugin heap size based on the number of workers
- for manual heap size setting, use the proper types (uword),
and proper format/unformat functions (unformat_memory_size)
Change-Id: I7c46134e949862a0abc9087d7232402fc5a95ad8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
private header size allows to reserve firs X bytes of payload to be
considered as private metadata. For now we just support value 0
but adding this field to address future needs without changing protocol
version.
Change-Id: Id77336584c0194a303b20210aff584c7372cba01
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Changes the source of the l3 offset to a more
proper one, same as I5d9f41599ba8d8eb14ce2d9d523f82ea6e0fd10d.
Change-Id: I5ff05d7d89507ecb378a2bd62f5b149189ca9e99
Signed-off-by: Szymon Sliwa <szs@semihalf.com>
|
|
until it is needed
Registering ACL plugin user module within the "ACL as a service" infra during the plugin init
causes an unnecesary ACL heap allocation and prevents the changing of the ACL heap size
from the startup config.
Defer this registration until just before it is needed - i.e. when applying an ACL to
an interface.
Change-Id: Ied79967596b3b76d6630f136c998e59f8cdad962
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: If168a9c54baaa516ecbe78de2141f11c17aa2f53
Signed-off-by: Damjan Marion <damarion@cisco.com>
|