Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2342baa91234db1336394305c031dbfa21d219a5
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If50e66638554e0fcfc72d35a89a39379dfcb530d
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9462de3d27b88539bff87c07a59987dd62fb2add
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ifdb623c092cf0a9d9e24117edc32c6ddf014052f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2171ef678ecad12d681668257498a5a62004152f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8fd870e757e9243d4f0916dfbbe65495f7e1a8c6
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Icdc359beb127944418305775e42fa88c569dfbd7
|
|
Type: fix
Plug-in for IPv6 Segment Routing Mobile
Fix the static analysis issue on srv6-mobile/gtp4_d function.
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I5c419b76a30c9616dc3557267fcceed0d512b67e
|
|
Type: fix
Ticket: VPP-1804
Fix a regression introduced by 640edcd90.
The port set ID on received IPv6 packets for MAP-T was being
checked against the destination port. It should be checked
against the source port.
Added a new unit test to verify that a v6 packet with a good
source port is translated and forwarded and a v6 packet with
a bad source port is dropped. The important part of the test
which will prevent similar future regressions is that the
source port and destination port are not equal. The existing
unit test used the same source and destination port which is
why it did not fail when the regression was introduced.
Change-Id: Idc144ea509722bb9e0f80b3887d220384a04e6d6
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: test
Change-Id: I4f8aee3efa53d58f96631fe2d2da5756304fb75a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Plug-in for IPv6 Segment Routing Mobile
Support the plug-in function in SR Policy.
Support GTP4.D plug-in as SR Policy plug-in.
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I306160b7203921d879940193868944158867c482
|
|
Type: fix
Change-Id: I454aff1b187b75a1328c90e30b9b487377ae5f68
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Type: feature
the fib_source_t enum alone no longer defines the priority and
behaviour, instead each source must be allocated these attributes.
This allows the creation of other sources by the plugins (and
soon over the API).
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
|
|
Type: fix
Change-Id: I5467bbe3b25b1ea3fb44157abe6e7bfb3f191e77
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
There is a race condition in when receiving TX from
a client application :
As egress_emit writes as much data as possible to
the stream, if during egress_emit the app writes
to the fifo, the data will be directly passed to
quicly. Then TX callback happens and triggers
a scheduler update telling quilcy the stream has
data to send. When the next egress_emit is called
and no more data has come, we have nothing to write,
we return len = 0 to quicly which breaks an assert if
a loss happens later on.
Change-Id: I47e00a14dfc9068b5dac7b5c090a89124aea004f
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
First attempt to clean the leftover state when
accept_notify / connect_notify fails due to mq
size constraints. vpp should now be left in a
state such that clean state will eventually be
reached when timers fire.
Change-Id: I9e1166dab2778bf05d5af42d437769651369cae0
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I55aace44773e4fab0470d27b14dd68544f7d99c5
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Change-Id: Ia9cb57b9f7c2d14a137556d6918763f1cb11850d
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: Iab96ebc1579b0be5b711f975163f9ac96648d2ad
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3aad20b35d89fc541fdf185096d71ca12b09a6e2
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
|
|
If a map domain is created without a tag name, inspecting
the map data will segfault looking for an unset name in
the so-called "domain extras" vector.
Enhance "show map domain" to show all map domains.
Type: fix
Change-Id: Ic55662b84eec58221816da270b2ef9e89c3a31c3
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: feature
ECHO_LOG has the following levels
0 -> global progression (many connections)
1 -> Connection global evts (some conn, much data)
2 -> More connection events
3 -> Data related logging
Change-Id: I69eeaa0dd02a4b8ebcfefa1c7a218ef57f217d2b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Use consistent API types.
Type: fix
Change-Id: Ib5b1efa76f0a9cecc0bc146f8f8a47c2442fc1db
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: docs
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: Ia2b892e550d391d421d9980d736768c918955cb6
|
|
When a DHCP client is configured on a NAT outside interface with
output feature enabled, DHCP packets will reach the NAT in2out-output
node and will be dropped with "out of ports" reason.
With this commit, allow locally originated DHCP packets to be sent
from a NAT outside interface with output feature enabled.
Type: fix
Change-Id: I47d76b22587f2bf0c7b0b9dfda41c89f8f61d0b4
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Introduce AddressSanitizer support: https://github.com/google/sanitizers/
This starts with heap instrumentation. vlib_buffer, bihash and stack
instrumentation should follow.
Type: feature
Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Fixes: 5a2e278a09726be627b8310e03f0522d60aafedf
Change-Id: Ibdc2f0be44e382bfa4a8f3e16be8d6239d7a0ec1
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: refactor
Change-Id: I5ec7079d34826edd7a3048ae1d44037386f5d3ff
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
This patch fixes crash issues(marked in brackets) in the below test cases
test flow enable index 0 1/1 -> [crash]
test flow disable index 0 1/1 -> [crash]
test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8
test flow enable index 0 1/1
test flow disable index 0 1/1 - [crash]
test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8
test flow enable index 0 1/1
test flow enable index 0 1/2
test flow del index 0 -> [crash]
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I84bc6faa3d93a2cab4c82e8a876a8b1067257b62
|
|
Ticket: FDIO-753
Type: fix
Change-Id: I4a8cf06970b658dfa15768459a3ff76571d6dfff
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: style
Change-Id: Ib8febf8ea83f7ce1aeb93f227d00d3111fbef4ab
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Change-Id: I1d90c8807e7eea4a77403bafc0628ec0d393c572
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
* Remove the retry mechanism in case of failed connect
* Limit the number of simultaneous connects (default
to mqsize / 2)
Change-Id: I7a0ed2e349ee3e8ca71639c2a2ec4cdf84f5c13e
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
We don't need the pool anymore as we store
the ctx index in the underlying UDP session opaque
Change-Id: Iec9be9c84a1f929d94b084176a143d304b0acb83
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Use ipsecmb single GCM enc/dec API to furthuer improve single
buffer performance for small packets.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I2d34ff50d34b09f194fc0c88b6e9a3928a86fc33
|
|
Type: fix
Change-Id: I5ad27b05c34494c5a2ea28706130612b547aaf67
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
To avoid excessive bursts, pacer must be provided with an estimated rtt
for the connection. That's used to compute an idle timeout, i.e., time
after which the bucket is reset to 1 mtu due to inactivity. For now,
idle timeout is computed as 5% of the rtt.
Change-Id: Ia0b752fe7b4ad0ce97b477fb886b0133a2321541
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: test
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If31f4b50da7a6e4a9704ceb3415c582143c08355
|
|
traffic selector vector isn't freed when freeing child SA
Type: fix
Change-Id: Icf6c240db5093f45d141451bad6f6627a61821cf
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Ticket: VPP-1771
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I48854befbd3d1514ad8b41ac5b194259c2a577a4
|
|
Type: feature
Adding:
VNET_FLOW_TYPE_IP4_GTPC
VNET_FLOW_TYPE_IP4_GTPU
VNET_FLOW_TYPE_IP4_GTPU_IP4
VNET_FLOW_TYPE_IP4_GTPU_IP6
VNET_FLOW_TYPE_IP6_GTPC
VNET_FLOW_TYPE_IP6_GTPU
VNET_FLOW_TYPE_IP6_GTPU_IP4
VNET_FLOW_TYPE_IP6_GTPU_IP6
in this patch
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I4ad53895b5ac0771432bb039b8c79e48e3c19f25
|
|
Type: fix
Change-Id: I689649ad163e76fecdabe96a8c2be5be3068ffde
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: I38a5cbd53b278c21142bac4ee1bbe5dc8bcaaac9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ia4b1eb3c704374e27b260d88ae6ab628754468d3
|
|
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ia28cf193f7fed2a1702774f3f74f505cc7bad954
|
|
Type: fix
Change-Id: Ic221cd4fcad89aece71239ed96152bf0311f3286
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Plug-in for IPv6 Segment Routing Mobile
This funcion was developed by
Signed-off-by: Satoru Matsuchima <satoru.matsushima@gmail.com>
Signed-off-by: Filip Varga <filipvarga89@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Ie995adc73d8f8d444339aab71619c3599e69f12d
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|