Age | Commit message (Collapse) | Author | Files | Lines |
|
When removing a l3xc path we must release the corresponding dpo.
Type: fix
Change-Id: Ib6309797cb11374264c786e064f262ad13c6f0a1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When a buffer in the chain comes with a negative current_data offset,
the conversion to sgl will skip it because of resetting offset to 0.
Moreover, crypto_start_offset is relative to the 1st buffer data pointer
so we should not check it against subsequent buffers anyway.
Type: fix
Change-Id: Id177a90bfda242a5372c7e8836cf6668e98c780e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Thread assignment to tx queue has always been automatic and there
was no way to modify it. With this patch, it is now possible to use
the cli "set interface tx-queue" to change the thread assignment to
tx queue for vmxnet3 interface, thanks to the new tx infra.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I1544e3557f70251d4bd423cc3d9f28ee1d44db4a
|
|
When enqueuing chained buffer, we must update the descriptor length for
each fragment descriptor in addition to the last.
Type: fix
Change-Id: I9bc95fe557a049eeea4abd41c695153632d52a52
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When switching to the direct verb chain buffer tx path, we must account
for all remaining packets, including the packets that would wrapped
around.
Previously we were using the 'n' counter but ignoring the 'n_wrap'
counter: if some packets would have wrapped around in the default path,
it would be ignored by the chained buffer tx path.
Compute the correct number of remaining packets based on the old and
current txq tail instead.
Also simplify the chained tx function parameters.
Type: fix
Change-Id: If12b41a8f143fda80290342e2904792f7501c559
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
The total_length_not_including_first_buffer field must be reset before
being updated otherwise it will quicly grows as stale values are reused.
Type: fix
Change-Id: Ic48c0822660998b0dfc0b5fdeadae6071b2d03f7
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
If an IPv6 Link Layer Address is missing from an interface,
treat it as a down interface. While this fails to send a
VRRP multicast group join, it also prevents a seg fault.
Type: fix
Fixes: 39e9428b90bc74d1bb15fc17759c8ef6ad712418
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: Iebf69bb30604a96de6587655eb872aa818158a56
|
|
Type: fix
Outbound packets which arrive on tun/L3 interfaces use a default
adjacency for the interface & address family from the corresponding
interface pair. However, there are entries in the linux-cp adj table
that are created for them. Managing these entries might cause a
segfault because the rewrite data might exceed the reserved space for
it of 28 bytes in the linux-cp adj key (e.g. in case of GRE IPv6).
With this change, stop creating adjacencies for tun/L3 interfaces in
the linux-cp adj table and delegating them.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I4bcd685860053ab87c65064c182e3ed53fd4fae9
|
|
Type: improvement
Allow callbacks to be registered which will be called when an
interface pair is added or deleted.
Change-Id: I1c413ac2ada802021f9e56e2f878ce67e5eda2f5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Fixes: bf55e9931ce203049385fbf55dde291ead556679
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I5410a7a5a8cdc1d41abcc42fe5b42e6e2991dc06
|
|
If ICMP comes from a router on path, source address must not be
rewritten in o2i path to avoid getting wrong checksum.
Fix ICMP checksum computations.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I035debccf966d7dbd63c364cb1e43380d641f708
|
|
Type: improvement
Set port type and supported flow actions on 2.5G Intel NICs which are
managed by the igc PMD.
Change-Id: Id144eaa158e24a3f10effb6b517d1c62fba0d2e8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
TTL was already decremented in ip4-rewrite so it's okay if it's 1.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I587dc343737c15247eb62837a06d5e44c0d11acc
|
|
Type: test
UT for patch: 4fc68ee
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I96fac9a6407a7f3ebeecc5e68a7683e541063de7
|
|
Type: fix
Signed-off-by: jxm <jiangxiaoming@outlook.com>
Change-Id: I6fb2620e7076e1e38a2ab85a70febe614b079e67
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2d5039cd35edd02ffa2439bcac119d0647234385
|
|
Type: fix
Currently, is_interface_addr() tests if a given IPv4 address belongs to
an interface by a given sw_if_index. However, there are several issues:
* only the first found address on the interface is actually tested,
* sw_if_index is always cached even if the interface hasn't been
assigned any addresses yet.
With this change, is_interface_addr() tests all IPv4 addresses on an
interface by a given sw_if_index and caches sw_if_index only if there
are addresses present.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: If1acc4a534647a5f0ce8e9b565b867c92a016dc3
|
|
Type: fix
Currently, there might be a crash in NAT ED mode:
* if a session for an unknown proto packet cannot be created in2out,
* if a session for an unknown proto packet cannot be found out2in.
With this change, translate packets only if a session is given in NAT
ED mode.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Iafb332db1ae9a3e76435964ad636037d1b8a51e8
|
|
use autogenerated code
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I91a55412f96b138c3c00cbb8943d271c8a6452c9
|
|
Type: fix
Change-Id: I456cc0b0a6f2dc32b14791baf9d4a7f67279e8df
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
when the configuration of tx queues is larger than the worker-threads,
the clib_spinlock_lock_if_init will not be executed, and then this function
will executed the clib_spinlock_unlock_if_init, so this may caused the issue.
Type: fix
Signed-off-by: fangtong <fangtong2007@163.com>
Change-Id: I3ce244cd5e1f410e9f14bd060b929238f069b9fa
|
|
Type: fix
Change-Id: Id6406702061ada54e51ebcf5c367328605de2b6b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Test added to the unittest plugin / test_vlib.py
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I73445e57918347c102ff6f5e8c9ddb9bd96f1407
|
|
Type: fix
Change-Id: I58931e235535be7d596ca578790f389b64a4fbd2
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I76923ad5035498aae821db4fd42a127617476fbb
|
|
Type: fix
Outbound packets from the host have an adjacency lookup performed so
buffer metadata can be filled in and output features can be applied.
If no adjacency is found for a packet, it gets dropped. This breaks
DHCP and possibly other things since the DHCP reply to a discover
request is sent to a destination MAC address that is determined by
the contents of the request packet rather than any existing neighbor
table entry.
If adjacency lookup for outbound packets does not find an entry, use
the default adjacency for the interface & address family.
Change-Id: Ia53a4df3a5bad2991768cfe4a84c560b879e656f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I62fb56257445a05105e556d1ea6cc6280b5eeccc
|
|
snat_set_frame_queue_nelts has been replaced with
nat44_ed_set_frame_queue_nelts.
Type: fix
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Change-Id: I8d970be71376fdbb2bfd383d4d5824a8def93bb3
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I59218f784140ef5ecb8468af6aebfe25fd7703a4
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I34b53dcaf4f049157b538ea40a39033d43e525a5
|
|
Type: feature
This patch bumps DPDK version to 21.05 and updated VPP to
accomodate the changes in DPDK latest version.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: If217441f70c9ab531196dca7ec7a486ec9931cff
|
|
Type: fix
This patch fixes the missing symbol of dpdk_plugin.so when
creating symmetric key. The solution is to add dependency
of libssl to dpdk cryptodev and disable cryptodev engine
when libssl is not presented.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I30aa6e3e3af1faefa82883bad613e1d82235a2ec
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3a33230de13fef613dc9523cf24a9968d200c2e5
|
|
Add extra assertions to debug build.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ib20130365e8f9dbb556fcbb4321dd184c7eff603
|
|
Revert raw column from the perfmon plugin.
Type: refactor
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: If127f57ee2022cc1c0ea5177f1655a792f195f1d
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic5e99938a5f130e83de6d590d2f89252d055bceb
|
|
interface created
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I31a83cd50513078895078bae3ae11372d351ddcd
|
|
Type: fix
When enabling the endpoint independent NAT44 plugin, user_sessions
determines the maximum number of translations that can be active for
a single inside address. If 0 is passed in, a default value is used
but 0 is still stored in the field that is used to populate reply
messages to nat44_ei_show_running_config,
At the time of enabling the plugin, if user_sessions is 0, update the
field which is used by nat44_ei_show_running_config to contain the
default per-user limit which gets used by the EI nodes.
Change-Id: I6b060d85bcd42d91db879b95a8b07c6844bcd2a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I665d9d11fcdd9af33e38972a74e51ce3085f3e55
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib25598f72f6539c07de1acee1e6049ecd28f35cc
|
|
Instead of pre-programming the data offset on rx, use offset passed in
the descriptor. This is more robust and future-proof.
Type: fix
Change-Id: I2bd910d92b8b03d17be5be85a24108be711dc7b9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
If interrupt mode is configured through startup.conf exec script, the
input function will not be polled and the rx ring will never be filled.
Always refill the ring when interface goes up so it is ready to receive
packets.
Type: fix
Change-Id: I4cf22c8ae00638679f2e8650303a6fe916c1319b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I873a99c1258a97ed5ed195b9756e8302f865e7f0
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Prior to Linux 5.6 there is a race condition between poll() and
sendmsg() in the kernel. This patch protects the syscalls with a lock
to prevent it, unless the NO_SYSCALL_LOCK flag is set at create time.
See
https://lore.kernel.org/bpf/BYAPR11MB365382C5DB1E5FCC53242609C1549@BYAPR11MB3653.namprd11.prod.outlook.com/
Type: fix
Change-Id: Ie7d4f5cb41f697b11a09b6046e54d190430d76df
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Add /nat44-ed/max-cfg-sessions gauge.
Reflects the configured value for configured sessions (per thread).
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I618c8aa0daab0981399cfe9273d191fa1990ef60
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
When an adjacency is created, add the linux-cp delegate on the new
adjacency so we can later deal with modifications & deletions in our
cache of adjacency data.
Add a pool of hash keys and associate the pool index for a particular
key with the adj_delegate_t. If the rewrite on an adjacency is changed,
this will allow us to delete the old hash table entry and it will not
become orphaned.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I072b960c02cf377d66f7d18b8c0e9e05824a0ca3
|
|
Only works with release binaries.
Type: test
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iede88713e1dbc4d1c6ae62651ff9150f88953f4d
|
|
Use ctx timer wheel not current thread since connects are done on main
but the ctx is allocated on first worker.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibed371bed12970d0d1ae4572f36df0bb1fb70b0f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I901980f1f8ae8eb51c3972537ccac80f620868d0
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8003198c15cd511750dc7eaae025025c733c059c
|