Age | Commit message (Collapse) | Author | Files | Lines |
|
-- The session should not be deleted when either ip address or port doesn't same with static mapping.
Change-Id: I09ab7379947654d2780a8c40c5340ce430541b12
Signed-off-by: shubing guo <guo.shubing@zte.com.cn>
|
|
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4e774dc53b08746cd4ab42393f33676dcc78e791
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
... rather than re-implementing the loop
Change-Id: I20bede8403c804cbec654db9b7020a4d01e5bc18
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Commit 1c7bf5d41737984907e8bad1dc832eb6cb1d6288 added the poisoning
of the newly freed memory in debug builds, exposing a logic
error in mask assignment code - it passed a pointer to
within a pool to a function which might potentially expand the pool.
This resulted in a failure of the test in the debug version.
Fix that by making a local copy of the value before passing
a pointer to it.
Change-Id: I73f3670672c3d86778aad0f944d052d0480cc593
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I756e3ad3de9ffe1494221ef95c1943c8591f8f50
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
dpdk raw item match string changed from flexible array member to a
pointer member
Change-Id: I930f05112ce04b0cdb3feb985d755e730b102084
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
plugin won't compile if VLIB_BUFFER_TRACE_TRAJECTORY is set. The
quad loop was OK, bug in single loop only.
Change-Id: I11262bf6a223680eeac7ed23238ceda425a02c1b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I2f376a777081da131110227e760ca0069438c918
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
This change avoids the long-read-after-short-write, resulting
in a small performance improvement.
Change-Id: Ic01d1fd19182e96100ccaf441d7ab5e5898b9734
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Add support for local backends in multiple VRFs for load-balancing NAT rules.
Change-Id: I64e6818bd67a7e69985003498cf1f16f7200c334
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ibd5cbbdfb22a235442cddaebc9eae9a3c4e35ec9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib596e7f525b83dc7e830bcf6a126cd210216ce86
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
create runtime dir when adding default socket filename.
Change-Id: Iad7e751fcab7ce773e0907302414a06ea44dd6cd
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: Ifc8b3d30d66c7ade1e3584844ce3f82d42d2fb94
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I09b8406168df4b6b28df3ede24ee839681be0195
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Reduce default queue size to twice the vlib frame size. This throttles
the PP from transferring more packets than are necessary for the next
round of graph execution on a core. When combined with DMA'ing into L3
cache, Mpps for 64B packets increases 35%.
Change-Id: I0afe426d23560f262fdc56accb6302b099bd0076
Signed-off-by: Brian Brooks <brian.brooks@arm.com>
|
|
Needed a spinlock to protect the data vector. Cleaned up debug cli so
the output makes sense, and so that various parameters exist in one
place. Removed a nonsense memset-to-zero which led to ultra-confusing
results.
Change-Id: I91cd14ce7fe84fd2eceab86e016b5ee001993be4
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I51cc4522df2dd6682148a13e7e1903850b4b3d08
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3a4529ff8dae70da99ec95c39ddf788c9498f478
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
- assign rx thread on interface create, not on admin up
- keep interrupts unmasked all the time as they are needed for writeback
- forward interrupt to graph dispatcher only if queue is in the interrupt mode
Change-Id: I5cc5afe24960143bef08f12d59fbd80ae0c6ccf8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
in case of relative path, create subdirs inside runtime dir.
in case of absolute path, if folder does not exist return error.
Change-Id: I01fe018102c69deb105160cfa18b741541d76c82
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
avf_create_reply returns software index for the new interface
Change-Id: I8a6b1a1985b072efafa24eb258b1f2cb1bea1110
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Move the tcp unit test to the plugin
Add a bihash unit test and a "make test" program to call it
Adjust framework.py to load the plugin, which is disabled by default
Change-Id: Ic229d386a56a9d28dbd54974f231149053ca8f93
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
One handler is good enough when engine sends out a retry status
Thus this patch will just go one branch
Change-Id: Id81cb3fa67d2b322b0fe1b2f62cd866cf3491eb4
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: I5009fcfde5c627d59dea3edda15486b9392134a2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
with ip direct broadcast enable a packet to the interface's
subnet broadcast address with be sent L2 broadcast on the
interface. dissabled, it will be dropped. it is disabled by
default, which preserves current behaviour
Change-Id: If154cb92e64834e97a541b32624354348a0eafb3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0fc19dd109e569f2c407a85e8fa32758e06676b8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iad7e0337a577ef8a0dfb7bde1968cc115d176043
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
DBGvpp# set interface rx-mode AVF0/4/2/0 interrupt
set interface rx-mode AVF0/4/2/0 interrupt
DBGvpp# sh int rx
sh int rx
Thread 0 (vpp_main):
node dpdk-input:
FortyGigabitEthernet6/0/0 queue 0 (polling)
node avf-input:
AVF0/4/2/0 queue 0 (interrupt)
DBGvpp# sh int addr
sh int addr
AVF0/4/2/0 (up):
L3 133.1.1.10/24
FortyGigabitEthernet6/0/0 (dn):
VirtualEthernet0/0/0 (up):
L3 192.168.42.1/24
DBGvpp# clear run
clear run
DBGvpp# clear interfaces
clear interfaces
DBGvpp# sh int rx
sh int rx
Thread 0 (vpp_main):
node dpdk-input:
FortyGigabitEthernet6/0/0 queue 0 (polling)
node avf-input:
AVF0/4/2/0 queue 0 (interrupt)
DBGvpp# ping 133.1.1.3 repeat 1
ping 133.1.1.3 repeat 1
64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.6237 ms
Statistics: 1 sent, 1 received, 0% packet loss
DBGvpp# sh int
sh int
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
AVF0/4/2/0 5 up 9000/0/0/0 rx packets 1
rx bytes 98
tx packets 1
tx bytes 98
drops 1
ip4 1
FortyGigabitEthernet6/0/0 1 down 9000/0/0/0
VirtualEthernet0/0/0 2 up 9000/0/0/0
local0 0 down 9000/0/0/0
DBGvpp# sh run
sh run
Time 41.9, average vectors/node 1.00, last 128 main loops 0.00 per node 0.00
vector rates in 2.3858e-2, out 2.3858e-2, drop 2.3858e-2, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
AVF0/4/2/0-output active 1 1 0 1.24e4 1.00
AVF0/4/2/0-tx active 1 1 0 4.28e4 1.00
api-rx-from-ring any wait 0 0 2 6.94e4 0.00
avf-input interrupt wa 1 1 0 1.09e4 1.00
avf-process any wait 0 0 47 1.01e4 0.00
...
DBGvpp#
DBGvpp# set interface rx-mode AVF0/4/2/0 polling
set interface rx-mode AVF0/4/2/0 polling
DBGvpp# sh int rx
sh int rx
Thread 0 (vpp_main):
node dpdk-input:
FortyGigabitEthernet6/0/0 queue 0 (polling)
node avf-input:
AVF0/4/2/0 queue 0 (polling)
DBGvpp# ping 133.1.1.3 repeat 1
ping 133.1.1.3 repeat 1
64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.2038 ms
Statistics: 1 sent, 1 received, 0% packet loss
DBGvpp#
Change-Id: Ib7d2b505ae4bb74a052263af766ca37d9df7bfe4
Signed-off-by: Steven <sluong@cisco.com>
|
|
Fix a typo from previous patch. Change 0x104 to 0x1004.
Change-Id: I82230a8a0ec01567eb1d4bc12ac02062c2a98347
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Thus when engine buffer is full during a burst in performance
tesing, this code will help VPP handle retry machansim.
Change-Id: I0f9fc05d3dba8a54d34dca4c6137700d6c80f714
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
The length field is included in the checksum. Therefor, we need
to update it before calculating the checksum.
Change-Id: Id23234efb80ea3747a0f8a5c7bf8621748d27635
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
If a PMD writes too many log messages using rte_vlog(), the
pipe for logging can fill and then rte_vlog() will block
on fflush() while it waits for something to read from the other
side of the pipe. That will never happen since the process node
that would read the other side of the pipe runs in the
same thread.
Set the write fd to non-blocking before the call to
rte_openlog_stream(). If the pipe is full, calls to write() or
fflush() will fail but execution will continue.
Change-Id: I0e5d710629633acda5617ff29897d6582c255d57
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Recognize the PF and VF device IDs for the Mellanox adapter
used on Azure.
Change-Id: Ic7b36b37ac93db2b696354ffe6fa2b6d62ee3801
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I7513c41307e62068ab5d9739cac393675c6066f8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This patch addresses the coverity scan warnings reported for the DPDK
plugin.
Change-Id: Ie7ac7ffcf4a6c63245eae0f9910a193ab1e318a8
Signed-off-by: Marco Varlese <marco.varlese@suse.de>
|
|
Configure w/ --enable-dlmalloc, see .../build-data/platforms/vpp.mk
src/vppinfra/dlmalloc.[ch] are slightly modified versions of the
well-known Doug Lea malloc. Main advantage: dlmalloc mspaces have no
inherent size limit.
Change-Id: I19b3f43f3c65bcfb82c1a265a97922d01912446e
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I23be9c29227e7dd1bb11b5b7fa910bb61c2be6c9
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
(cherry picked from commit b4b2488202ff4282cc4a7bd779cc33934286c5cd)
|
|
The length in the GTPU header does not specify the length of the
payload. It does specify the number of bytes following the fixed
part (the first 8 bytes) of the GTPU header (see 3GPP TS 29.060,
Sect. 9.3.1).
Change-Id: I8ce73df015e1cf1f38d306666962c0058756111c
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
The fourth GTP-U packet had a wrong reference, leading to data
corruption.
Change-Id: Id82f87368183d5e8b7047133c5ea799f2a9cb43c
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
Change-Id: If6970788396c85415634f12304f49eed0d812281
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix the copypaste-triggered errors in load-from-file ACL test code.
Also, add an explicit exit(1) after clib_error() to convince coverity
that code path is terminal indeed.
Change-Id: I1deedb49144559c9183449005ada0433c24db18a
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I003e41786c549c6451a1e9e178f5871d32c20e6e
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G
Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA)
(doc/guides/nics/qede.rst)
Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I72978c5957cb1acf154c9de7ad153092bac37785
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Change-Id: I28d05a04abd11f630035d34ce573016c77ffab53
Signed-off-by: shenJibiao <shenjibiao@corp.netease.com>
|
|
thanks to coverity... validate that the length of the packet on
wire matches the size of the header based on the number of groups
and sources. drop those that don't match.
Change-Id: Iab3f3a835f6a43d9c73c5d502ea5ceccdd6985b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|