Age | Commit message (Collapse) | Author | Files | Lines |
|
If ICMP comes from a router on path, source address must not be
rewritten in o2i path to avoid getting wrong checksum.
Fix ICMP checksum computations.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I035debccf966d7dbd63c364cb1e43380d641f708
|
|
Type: improvement
Set port type and supported flow actions on 2.5G Intel NICs which are
managed by the igc PMD.
Change-Id: Id144eaa158e24a3f10effb6b517d1c62fba0d2e8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
TTL was already decremented in ip4-rewrite so it's okay if it's 1.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I587dc343737c15247eb62837a06d5e44c0d11acc
|
|
Type: test
UT for patch: 4fc68ee
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I96fac9a6407a7f3ebeecc5e68a7683e541063de7
|
|
Type: fix
Signed-off-by: jxm <jiangxiaoming@outlook.com>
Change-Id: I6fb2620e7076e1e38a2ab85a70febe614b079e67
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2d5039cd35edd02ffa2439bcac119d0647234385
|
|
Type: fix
Currently, is_interface_addr() tests if a given IPv4 address belongs to
an interface by a given sw_if_index. However, there are several issues:
* only the first found address on the interface is actually tested,
* sw_if_index is always cached even if the interface hasn't been
assigned any addresses yet.
With this change, is_interface_addr() tests all IPv4 addresses on an
interface by a given sw_if_index and caches sw_if_index only if there
are addresses present.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: If1acc4a534647a5f0ce8e9b565b867c92a016dc3
|
|
Type: fix
Currently, there might be a crash in NAT ED mode:
* if a session for an unknown proto packet cannot be created in2out,
* if a session for an unknown proto packet cannot be found out2in.
With this change, translate packets only if a session is given in NAT
ED mode.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Iafb332db1ae9a3e76435964ad636037d1b8a51e8
|
|
use autogenerated code
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I91a55412f96b138c3c00cbb8943d271c8a6452c9
|
|
Type: fix
Change-Id: I456cc0b0a6f2dc32b14791baf9d4a7f67279e8df
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
when the configuration of tx queues is larger than the worker-threads,
the clib_spinlock_lock_if_init will not be executed, and then this function
will executed the clib_spinlock_unlock_if_init, so this may caused the issue.
Type: fix
Signed-off-by: fangtong <fangtong2007@163.com>
Change-Id: I3ce244cd5e1f410e9f14bd060b929238f069b9fa
|
|
Type: fix
Change-Id: Id6406702061ada54e51ebcf5c367328605de2b6b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Test added to the unittest plugin / test_vlib.py
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I73445e57918347c102ff6f5e8c9ddb9bd96f1407
|
|
Type: fix
Change-Id: I58931e235535be7d596ca578790f389b64a4fbd2
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I76923ad5035498aae821db4fd42a127617476fbb
|
|
Type: fix
Outbound packets from the host have an adjacency lookup performed so
buffer metadata can be filled in and output features can be applied.
If no adjacency is found for a packet, it gets dropped. This breaks
DHCP and possibly other things since the DHCP reply to a discover
request is sent to a destination MAC address that is determined by
the contents of the request packet rather than any existing neighbor
table entry.
If adjacency lookup for outbound packets does not find an entry, use
the default adjacency for the interface & address family.
Change-Id: Ia53a4df3a5bad2991768cfe4a84c560b879e656f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I62fb56257445a05105e556d1ea6cc6280b5eeccc
|
|
snat_set_frame_queue_nelts has been replaced with
nat44_ed_set_frame_queue_nelts.
Type: fix
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Change-Id: I8d970be71376fdbb2bfd383d4d5824a8def93bb3
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I59218f784140ef5ecb8468af6aebfe25fd7703a4
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I34b53dcaf4f049157b538ea40a39033d43e525a5
|
|
Type: feature
This patch bumps DPDK version to 21.05 and updated VPP to
accomodate the changes in DPDK latest version.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: If217441f70c9ab531196dca7ec7a486ec9931cff
|
|
Type: fix
This patch fixes the missing symbol of dpdk_plugin.so when
creating symmetric key. The solution is to add dependency
of libssl to dpdk cryptodev and disable cryptodev engine
when libssl is not presented.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I30aa6e3e3af1faefa82883bad613e1d82235a2ec
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3a33230de13fef613dc9523cf24a9968d200c2e5
|
|
Add extra assertions to debug build.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ib20130365e8f9dbb556fcbb4321dd184c7eff603
|
|
Revert raw column from the perfmon plugin.
Type: refactor
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: If127f57ee2022cc1c0ea5177f1655a792f195f1d
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic5e99938a5f130e83de6d590d2f89252d055bceb
|
|
interface created
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I31a83cd50513078895078bae3ae11372d351ddcd
|
|
Type: fix
When enabling the endpoint independent NAT44 plugin, user_sessions
determines the maximum number of translations that can be active for
a single inside address. If 0 is passed in, a default value is used
but 0 is still stored in the field that is used to populate reply
messages to nat44_ei_show_running_config,
At the time of enabling the plugin, if user_sessions is 0, update the
field which is used by nat44_ei_show_running_config to contain the
default per-user limit which gets used by the EI nodes.
Change-Id: I6b060d85bcd42d91db879b95a8b07c6844bcd2a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I665d9d11fcdd9af33e38972a74e51ce3085f3e55
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib25598f72f6539c07de1acee1e6049ecd28f35cc
|
|
Instead of pre-programming the data offset on rx, use offset passed in
the descriptor. This is more robust and future-proof.
Type: fix
Change-Id: I2bd910d92b8b03d17be5be85a24108be711dc7b9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
If interrupt mode is configured through startup.conf exec script, the
input function will not be polled and the rx ring will never be filled.
Always refill the ring when interface goes up so it is ready to receive
packets.
Type: fix
Change-Id: I4cf22c8ae00638679f2e8650303a6fe916c1319b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I873a99c1258a97ed5ed195b9756e8302f865e7f0
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Prior to Linux 5.6 there is a race condition between poll() and
sendmsg() in the kernel. This patch protects the syscalls with a lock
to prevent it, unless the NO_SYSCALL_LOCK flag is set at create time.
See
https://lore.kernel.org/bpf/BYAPR11MB365382C5DB1E5FCC53242609C1549@BYAPR11MB3653.namprd11.prod.outlook.com/
Type: fix
Change-Id: Ie7d4f5cb41f697b11a09b6046e54d190430d76df
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Add /nat44-ed/max-cfg-sessions gauge.
Reflects the configured value for configured sessions (per thread).
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I618c8aa0daab0981399cfe9273d191fa1990ef60
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
When an adjacency is created, add the linux-cp delegate on the new
adjacency so we can later deal with modifications & deletions in our
cache of adjacency data.
Add a pool of hash keys and associate the pool index for a particular
key with the adj_delegate_t. If the rewrite on an adjacency is changed,
this will allow us to delete the old hash table entry and it will not
become orphaned.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I072b960c02cf377d66f7d18b8c0e9e05824a0ca3
|
|
Only works with release binaries.
Type: test
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iede88713e1dbc4d1c6ae62651ff9150f88953f4d
|
|
Use ctx timer wheel not current thread since connects are done on main
but the ctx is allocated on first worker.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibed371bed12970d0d1ae4572f36df0bb1fb70b0f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I901980f1f8ae8eb51c3972537ccac80f620868d0
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8003198c15cd511750dc7eaae025025c733c059c
|
|
In function ‘memcpy’,
inlined from ‘memif_device_input_zc_inline’
at src/plugins/memif/node.c:850:7,
string_fortified.h:34:10: error:
writing 16 bytes into a region of size 0 [-Werror=stringop-overflow=]
34 | return __builtin___memcpy_chk (__dest, __src, __len, __bos0 (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/plugins/memif/node.c: In function ‘memif_input_node_fn_neoversen1’:
src/plugins/memif/memif.h:175:16: note:
at offset 0 to object ‘desc’ with size 0 declared here
175 | memif_desc_t desc[0];
| ^~~~
Using C99 way empty brackets for flexible array members
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I7a6ad89f95e1b5e3f9aac36546a2559dbda9bd6c
|
|
Prefetch should be the next group of buffers instead of current buffers
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: If13967e27f74c10856ae48892420d7ade6f0c92c
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie8ec924ebaf006f1df84a1013050114831144a79
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7c47b55ec6f0c83f2d13e0e737d0559a32f7c837
|
|
On error, the signed value is cast to unsigned.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0f94422f47e40d7c358118b2df8ab96cf4116dd0
|
|
- quicly conn struct leaked on connection delete
- Occasionally connection delete is called twice
before connection is closed which caused a crash.
Type: fix
Change-Id: Ifaaaeda55f71d58c97fa4d6652bda60a3efd4b69
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: fix
Change-Id: I6fce8c1f91fc5080271c1832bf40a9fb6bbcb7e3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6221e1a5924223865b3caf53590d3668965b564c
Type: fix
Fixes: b4ff07a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ife79871c6530d2cd485928fee465baf2c8957e11
|
|
Type: fix
Change-Id: I338036a3cac74fd5f9772bcf7685ee6970653ddb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|