Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9a4bf384be65ba8b868d1172c7b6e00ae959601e
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie0d5fe97a727465f8851fc2110219483a5bf3f27
|
|
Type: fix
The code for quota exceeded events is a u32 and was being copied
into ipfix packets in host byte order. Same for the limit field.
Swap the order before copying into packet buffer.
This change was applied once before but had to be reverted. This was
because between the time the change was uploaded/reviewed and the
time it was merged, a different patch was merged which activated a
NAT ipfix unit test that had formerly only been run as part of the
extended tests. The test was expecting the values to be in host byte
order so it failed with this patch applied. This time around, that
test has also been updated to expect network byte order.
Change-Id: If5413b1f806d664f6786e56ba13c3eee573c26d2
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Define custom connect, listen, accept, close handlers for transport
protos under test.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifa260d05917256c590f29078f465ce47c576cbc3
|
|
Type: fix
The process node which wakes up when a timer expires and transitions
a backup node to master state may call a function to add a MAC address
to an interface. This works fine for some devices, but with DPDK 20.11
on i40e interfaces, the i40e PMD functions which enact the change cause
the stack to be exhausted. Increase the stack size for the node.
Change-Id: I824603e162f4f6d680486706210986572f0d9845
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Adding perfmon node TMAM support on ICX.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I48a9a9ff6a72efc28eaf0cb11ef39fb62cebb126
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I31d0f8e32f7bb508c6f57913d5a829ceaad91f7d
|
|
Also, only exchange config over control session.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I001df635896762bc5330cebb7d5744e3e754482d
|
|
Move info from vpp_papi_provider to .api/vpp_objects
Change-Id: Iaf46483fda2840dfec8d37e0b9262e1c9912be59
Type: test
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Under some timing conditions,VCL may receive CONNECTED/ACCEPTED
event before ADD_SEGMENT event.
Timing example:
2 threads call segment_manager_alloc_session_fifos() parallelly
Thread 1 Thread 2
sm read lock |
| |
try to alloc fifo =>failed |
| |
sm read unlock |
| |
sm write lock |
| |
add segment |
| |
sm write unlock |
| sm read lock
| |
| try to alloc fifo=>successful
sm read lock |
| sm read unlock
| |
| emit CONNECTED/ACCEPTED
emit ADD_SEGMENT event
|
sm read unlock
This commit move ADD_SEGMENT notification under the protection
of the write lock in some scenarios.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: I25d5475c5e6d37cfccefa9506f6030c26ce8ee9b
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Iead167e7497e0779c440f7fb243014a06ae2b452
|
|
With this change, enable MD5 with AES-CBC support in dpdk cryptodev.
Type: improvement
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic587aaa1fa0dc102e36eb34f329ef21a16156f26
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I92f0c1f7c0f4696fa12071440a643aa703d6306f
|
|
Pass tls/quic crypto context using extended config instead of bloating
conect/listen messages.
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0bc637ae310e6c31ef1e16847501dcb81453ee94
|
|
Type: fix
When building the tlspicotls plugin, we rely
on vpp-ext-deps having installed quicly & picotls.
We add a dependancy on the version installed thus
ensuring that people with older vpp-ext-deps version
installed don't have their build fail.
This has the drawback that picotls doesn't have its
own versionning scheme
Change-Id: I9e2ccfc00b3c37af2bc2483a791eb05f994dd4a4
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This bumps quicly version to v0.1.3 ( sha
d44c089364067dbcdfbad7fb2c821900fb4aef5e in
https://github.com/h2o/quicly )
Also simplifies the build to only make needed
dependancies, and silence compiletime warnings
Type: feature
Change-Id: Ie00ec7e408d234464871b68ddc79bb33dc4179ed
Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com>
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Sometimes session->value.flags wasn't initialized
leading to next_node index corruption.
Also added a debug flag to tell session/rsessions appart
Change-Id: I80da50f2267e03a4552e8c9efc8e3aa08bc5569d
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Properly select worker from hash table in out2in direction, increase
number of worker threads in MW test to 4 to test these cases.
Type: fix
Change-Id: I76eda5761ff497b85b031dd913a64b7fcb53b33a
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Removing obsolete optional parameters.
Type: fix
Change-Id: I135eb4767979ab81636da16e91752a2ad80e0a45
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic24516a7242ef4193c5d751a2d5424918c390759
|
|
If cache used than we don't print in trace session index.
Type: fix
Change-Id: Ib965cd8632b5217f8b2dd8b6cc6af3286c747582
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Since the move to DPDK 21.02, compatibility build symbols were depreca-
ted, breaking the static linkage of the DPDK plugin to libibverbs.
Change-Id: I2fec0807e4c0eb00268618f1495af862eede9081
Type: fix
Fixes: 5f35a185d5afee2c364fe84f33922bac1a808113
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
- rename node to more meaningful name
- introduce lookup tables
- enable multiarch
- quad-loop node
- enqqueue to next instead of enqueueing to node
Type: improvement
Change-Id: Ibb208047ae04bb6cfe56db558d3b8938bc14b4fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
For portabiliy reasons it is better to have all wrapped in clib code.
I.e. instead of using getcpu() we have clib_get_current_numa_node () and
clib_get_current_cpu_id().
Type: refactor
Change-Id: I29b52d7f29bc7f93873402c4070561f564b71c63
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Introduce MAX_CPUS parameters to control maximum number of CPUs used by
VPP(s) during testing, with default value 'auto' corresponding to all
CPUs available.
Calculate test CPU requirements by taking into account the number of
workers, so a test requires 1 (main thread) + # of worker CPUs.
When running tests, keep track of both running test jobs (controlled by
TEST_JOBS parameter) and free CPUs. This then causes two limits in the
system - to not exceed number of jobs in parallel but also to not exceed
number of CPUs available.
Skip tests which require more CPUs than are available in system (or more
than MAX_CPUS) and print a warning message.
Type: improvement
Change-Id: Ib8fda54e4c6a36179d64160bb87fbd3a0011762d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Move scapy packet generation code out of vpp object and into the test
case.
Type: test
Change-Id: Ib4de7409eefb79fc59f9815bed3befe5ecde483c
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Fixes: ca1812dbe714fc8e4de13f88df2d3b830d95a2c9
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Change-Id: I657be40689caa0c9e202fb411da6323aafeab57e
|
|
This patch fixes a vxlan flow type checking bug which is introduced in
commit 7a016e87e473.
It is the native avf instead of dpdk that doesn't support vxlan flow offloading.
So this patch removes Vxlan flow supporting in native avf_plugin and adds
the vxlan flow back to dpdk_plugin.
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1a72629cee462b890327c589c846f6d532b2d61d
|
|
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I215b660a466e0579918e49de543163fd28f95c22
|
|
The memory region is already registered right above, looks like a
copy/paste error.
Type: fix
Change-Id: I97aed821e719e1a34ac38c86d0473a8fdd671d4e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Adding test for NAT44-ED subplugin.
Type: test
Change-Id: I10ce3d3ca8cb976ee9879efe77cb600df0102147
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Current rdma input L3 validating behavior for scalar path is:
if any packet L3_OK flag matches, then unset skip_ip4_cksum.
The correct behavior should be if any packet L3_OK NOT match,
then unset skip_ip4_cksum. The logic is also different from
the vector path. This patch fixes the wrong behavior for scalar path.
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I5ca5ed3aa0c07d441f3c87b33f03ea8f7a3c9826
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1c38abde67c2f9be22186359a39ebc3a769b4a7f
|
|
Type: fix
Avoid complaint that we're potentially incrementing ii which could be
null.
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8511c07b1c2f260cc0e526d9aefeb4a051d98edf
|
|
Type: improvement
Change-Id: I466fd0324d53e8d68b53a2c84d97a722be90f4a0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I0ad0fa42f056b5797ba71d6972a44273c13bb97e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I91ecf0bff2ddd43ab5cf0f03ed2882882154557b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch fixes the below bugs in avf flow:
1. remove the VXLAN flow as it is not yet supported
2. fix a typo in IPv6 flow
3. fix the wrong type of the AH flows
Also did some cleanup in this patch
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I5eae131f1e89071364a41b7006a00e8425089a4f
|
|
See https://tools.ietf.org/html/rfc8926 3.4. second paragraph Opt Len
Change-Id: I191d835651b2fa64eeb4ec4271497cf3342554be
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Introduce a new option DEBUG=attach to run a test against existing
already running vpp. A new target 'make test-start-gdb' will spawn VPP
in gdb for this purpose. Customization options explained in test-help.
Type: improvement
Change-Id: Ia160a85b33da3b2df292d44bb95729af9dd9da96
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
This patch combined cryptodev op and cryptodev raw API data
paths into one and makes the engine run-timely select which
data path is used: if all cryptodev devices support
RTE_CRYPTODEV_FF_SYM_RAW_DP feature flag, the raw data path
API is used, otherwise the traditional data path is used.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: Ibbd7c4405288bd9a48a34878954fd3040df7b4ad
|
|
It is more appropriate to use log_debug instead of log_warn when inoking
clib_file_add and clib_file_del.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I544d97037cfca3f22ce94242aef0c7b0fea2fa9b
|
|
Need to add msg_id_base with VL_API_AVF_DELETE to properly set the
correct is_mp_safe variable.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I20f6e9441727fb7ffc132965b93c0a90482e1a52
|
|
When deleting an avf interface which is not the very first interface
that was created (dev_instance == 0), VPP crashes.
The reason is every avf interface delete always removes the very first
device instance due to ad->dev_instance was wiped out prior to the
statement pool_put_index (am->devices, ad->dev_instance)
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I69bd1588aab9a176f8eef46be7aa5063f5d29482
|
|
The crypto op flags must be reset to frame flags minus invalid values
depending of the operation, instead of forcing them to specific values.
Type: fix
Change-Id: Ib02c2a738bbca6962394b3c03088d516d0da56a0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Improve the code by removing another kind of wrappers.
Type: improvement
Change-Id: I5292ef6c1761e3c6c2edd15f2aa625dac26c3732
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I998c0686f9f7dc556dda8b28e23bbed127d0aafc
|
|
coverity is trying to outsmart human by guessing on COPY_PASTE_ERROR.
Have it your way.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0239c9745e21384aebbaf9e977962746b81ded58
|
|
The session db (bihash_40_56_t) was inheriting BIHASH_USE_HEAP=1 from
vppinfra/bihash_24_8.h through a convoluted set of #includes. Set
BIHASH_USE_HEAP in cnat_bihash.h, to avoid a surprise long after
anyone remembers the story.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I8aa3be09b306fc99ba0b6baa5096a0a6829a8951
|
|
Add linux similar arping command to VPP.
syntax: arping [gratuitous] <address> <interface> [repeat <count>] [interval <secs>]
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I9267c054235207b8fae8e3f159246777eb0340dd
|