Age | Commit message (Collapse) | Author | Files | Lines |
|
Add missing pre-input node runtime fork and refork code.
unix-epoll-input runs on all threads; each instance needs its own
runtime stats.
Change-Id: I16b02e42d0c95f863161176c4bb9f9917bef809d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Previous scheme was not cross-compile friendly...
Change-Id: Ib103b136231673157a02b8750312aa6073052c7e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3423191c53ab6100ee9ecc4e24b06506ff1b25c8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9b0a101e5d78c10257e3c5d8f5573c3eb29bfdef
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
As a FUD reduction measure, this patch implements 2-way parallel
counter collection. Synthetic stat component counter pairs run at the
same time. Running two counters (of any kind) at the same time
naturally reduces the aggregate time required by an approximate
factor-of-2, depending on whether an even or odd number of stats have
been requested.
I don't completely buy the argument that computing synthetic stats
such as instructions-per-clock will be inaccurate if component counter
values are collected sequentially. Given uniform traffic pattern, it
must make no difference.
As the collection interval increases, the difference between serial
and parallel component counter collection will approach zero, see also
the Central Limit theorem.
Change-Id: I36ebdcf125e8882cca8a1929ec58f17fba1ad8f1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
It is actually a bitmap....
Change-Id: Ie359e085df3f371512f773600f8d7460b2232b3e
Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
|
|
Change-Id: Idbbe5996a5749733a904433b57cba7ab63fdbbcb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ica88268fd6a6ee01da7e9219bb4e81f22ed2fd4b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I84dfdbb727fb765fcaa7fb0099cbdd7ef7dbcc10
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Change-Id: Icd21f456089c72c91a8328f963bf47a8c7725195
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I428bd25a513eb9fe65bea56572fea8cab7c51681
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
as this node is refactored in new style with
vlib_buffer_enqueue_to_next, we have to check if the 'count'
is greater than 0. otherise, the next_index would be invalid
then lead to a crash
Change-Id: If7c323b59c02b5c16bd9d77b65c946512cc972c1
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
Change-Id: I998658ad7860b23425444e218ce2e1ec655b885a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0ba5175be077c40556f2a3ce629c5bbcd71e0a81
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5fe01e918b534d1ac1d47f0d7610536f45c3158c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia083050389853c25b069f0f8286d50d3f4aef527
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3bb1d9f83dd08f4b93acd4a281bfec0674e39c2e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I151c1afac2133ad32ad7779a59fffafee4b9de60
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
For some reason, GCC 8 in debian is pickier than GCC 8 in ubuntu. It complains
about things in strncpy like this
/home/sluong/vpp/src/vlib/linux/pci.c:485:7: error: ‘strncpy’ output may be
truncated copying 15 bytes from a string of length 255 [-Werror=stringop-truncation]
strncpy (ifr.ifr_name, e->d_name, sizeof (ifr.ifr_name) - 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/sluong/vpp/src/vlib/linux/pci.c: At top level:
It also complains similar things in string_test.c
The fix in pci.c is to convert strncpy to use clib_strncpy
The fix in string_test.c is condiational compile the complained code for GCC 8.
Change-Id: Ic9341ca54ed7407210502197a28283bc42c26662
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Change-Id: I6048c6a51efa826ac333f7d15919cb87dd766d74
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This reverts commit 1e59f9ddbdda14591967e1d66eab8623f9ba58e4.
Change-Id: Iae1d372b887e170d28cac2fe4c61325ee5a5894a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Storing buffer in local template seems to be better option....
Change-Id: I1a2fdd68cb956f99a5b36d2cd810fc623e089bcf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib9c2aba1eda08a22465441e33553b9b744c79d56
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I764c6565f96e0cb9078503e54e3cf3bb3fd9ff3f
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: I47d021522cfc92cfb3877449333cbf31022c06f4
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Fixed NAT issues with dropping reverse packets in case NAT worked
in 'endpoint-dependent' mode and outside interface has FIB different
from 0 when the output-feature is set.
In this case, the out2in_ed dynamic hash key was not being created
correctly.
Change-Id: I6362967f4b09a375a4606eedaa8e264795b25453
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
|
|
Allocate physmem on the same numa
set link speed
cap vmxnet3 support version to 3 if the device supports higher version
Change-Id: Id47dd83b0da53e623fd6cf3ad010e58158b1ab15
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I2ef33c7c15b3eb1f55bbfd5cbdd230d6a4d58936
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that
happens, we display whatever that was in the stack variable for rss_hf which
is confusing.
The fix is to clear rss_hf prior to the call.
Before the fix
--------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
...
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other
After the fix
-------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
..
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: none
Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I7e59ae718d2722c49d42b22a0874e1645a191e89
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I1b327309586c9234a22cda011953a1940d31e1ba
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Given n equals to the maximum number of bytes to copy from src in the API,
or the rough estimate strlen of src, strncpy_s_inline should not copy more
than the number of bytes, computed by strlen(src), to dst if n is greater than
strlen(src). The number of bytes to copy is computed by strnlen(src,n), not n.
Change-Id: I088b46125d9776962750e121f1fbf441952efc2b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Iea64d246008b298edeeae338d781b79362f42046
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Remove the needless tests and checks which coverity complains about in
string_test.c
Change-Id: I971650cada77136f06528a65625ef99bd3d7e915
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ic56ee4ce83b282a5f0f5aed500721fe639b941b3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6031f3f9cfa048a901a8424d33d47679115c2eb3
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
PR in openssl community is almost done, and need to change some code in VPP
to align with the openssl interface.
Change-Id: Ic7da53e507b67b53958760d07738dd774b1c526d
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: Ib474e2af98d98d54c9fc4070fab56799555c0f31
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This reverts commit be16020c5034bc69df25a8ecd7081aec9898d93c.
The arm verify job actually failed but the result was overwritten by an x86 ubuntu retry.
Change-Id: Idcae7691fc575053563b8ff8bcad661c15891668
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
* u32/u64/uword mismatches
* pointer-to-int fixes
* printf formatting issues
* issues with incorrect "ULL" and related suffixes
* structure alignment and padding issues
Change-Id: I70b989007758755fe8211c074f651150680f60b4
Signed-off-by: David Johnson <davijoh3@cisco.com>
|
|
Change-Id: I99c0737dfeeec2db267773625ddc9b55324fd237
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: If2bbfbc52994f5de0879763e0b7a7864498debb6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9d8fcf930132e832941e5678a9278a029e104dc3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I76ba11441f0ab3d150cdd080919cda91eac60b01
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib573d45def80b4123d5623fda920e6cda1247638
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In addition to that, a bit of refactoring.
Change-Id: Iea1eabc2167bcdef185ec53bc09bae087c5398e6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I97c6475920b7f7028c2bb1117ff9e5f629a54b44
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Icd1e9638cdb288e94196391a2c85f2eaaf65387e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5440d80333190ebac46d22eac43183939805a24b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
fix a copy-paste bug, and a typo of function name
Change-Id: Ib408522d2bb6fde7a7492de6f5d5369b461d77c9
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|