summaryrefslogtreecommitdiffstats
path: root/src/plugins
AgeCommit message (Collapse)AuthorFilesLines
2018-08-14reduce polling and resume overhead by checking if inflight request existsPing Yu1-3/+6
Change-Id: I0777a00f0cc082bab3348be8ec0be39faa50ffed Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion8-37/+16
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-13dpdk: support for DPDK 18.08Damjan Marion5-66/+75
Change-Id: If1b93341c222160b9a08f127620c024620e55c37 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-11VPP-1381: Fix the incorrect if condition when delete session for static mappingshubing guo1-2/+2
-- The session should not be deleted when either ip address or port doesn't same with static mapping. Change-Id: I09ab7379947654d2780a8c40c5340ce430541b12 Signed-off-by: shubing guo <guo.shubing@zte.com.cn>
2018-08-11Multiversioning: Device (tx) function constructorMohsin Kazmi5-56/+9
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-11avf: fix prefetch bugDamjan Marion1-1/+1
Change-Id: I4e774dc53b08746cd4ab42393f33676dcc78e791 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-10Use the bihash walk functionNeale Ranns1-52/+45
... rather than re-implementing the loop Change-Id: I20bede8403c804cbec654db9b7020a4d01e5bc18 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-09acl-plugin: fix failures in some of IPv4 test-debug testcasesAndrew Yourtchenko1-4/+4
Commit 1c7bf5d41737984907e8bad1dc832eb6cb1d6288 added the poisoning of the newly freed memory in debug builds, exposing a logic error in mask assignment code - it passed a pointer to within a pool to a function which might potentially expand the pool. This resulted in a failure of the test in the debug version. Fix that by making a local copy of the value before passing a pointer to it. Change-Id: I73f3670672c3d86778aad0f944d052d0480cc593 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-08-09NAT44: delete user with zero sessions (VPP-1282)Matus Fabian5-20/+52
Change-Id: I756e3ad3de9ffe1494221ef95c1943c8591f8f50 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-08-06dpdk-flow:fix raw item initEyal Bari1-1/+3
dpdk raw item match string changed from flexible array member to a pointer member Change-Id: I930f05112ce04b0cdb3feb985d755e730b102084 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-08-03Fix typo in trace trajectory initDave Barach1-1/+1
plugin won't compile if VLIB_BUFFER_TRACE_TRAJECTORY is set. The quad loop was OK, bug in single loop only. Change-Id: I11262bf6a223680eeac7ed23238ceda425a02c1b Signed-off-by: Dave Barach <dave@barachs.net>
2018-08-03avf: add avf_create_reply_handler to avf_testJakub Grajciar1-1/+18
Change-Id: I2f376a777081da131110227e760ca0069438c918 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-08-03acl-plugin: fill in the 5tuple structure all at once, avoid short writesAndrew Yourtchenko1-5/+3
This change avoids the long-read-after-short-write, resulting in a small performance improvement. Change-Id: Ic01d1fd19182e96100ccaf441d7ab5e5898b9734 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-08-02NAT44: LB NAT - local backends in multiple VRFs (VPP-1345)Matus Fabian5-34/+37
Add support for local backends in multiple VRFs for load-balancing NAT rules. Change-Id: I64e6818bd67a7e69985003498cf1f16f7200c334 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-08-01Move java api to extras/Damjan Marion1-3/+1
Change-Id: Ibd5cbbdfb22a235442cddaebc9eae9a3c4e35ec9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-01Store USE_DLMALLOC in vppinfra/config.hDamjan Marion1-1/+1
Change-Id: Ib596e7f525b83dc7e830bcf6a126cd210216ce86 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-31memif: socket filename fixJakub Grajciar1-11/+19
create runtime dir when adding default socket filename. Change-Id: Iad7e751fcab7ce773e0907302414a06ea44dd6cd Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-07-31acl-plugin: move the acl epoch calculation into inline functionAndrew Yourtchenko1-7/+15
Change-Id: Ifc8b3d30d66c7ade1e3584844ce3f82d42d2fb94 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-07-30FIB: return entry prefix by const reference to avoid the copyNeale Ranns2-8/+8
Change-Id: I09b8406168df4b6b28df3ede24ee839681be0195 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-26pp2: change default queue sizeBrian Brooks1-2/+2
Reduce default queue size to twice the vlib frame size. This throttles the PP from transferring more packets than are necessary for the next round of graph execution on a core. When combined with DMA'ing into L3 cache, Mpps for 64B packets increases 35%. Change-Id: I0afe426d23560f262fdc56accb6302b099bd0076 Signed-off-by: Brian Brooks <brian.brooks@arm.com>
2018-07-26Clean up dpdk plugin rx/tx pcap tracingDave Barach2-32/+26
Needed a spinlock to protect the data vector. Cleaned up debug cli so the output makes sense, and so that various parameters exist in one place. Removed a nonsense memset-to-zero which led to ultra-confusing results. Change-Id: I91cd14ce7fe84fd2eceab86e016b5ee001993be4 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-07-26avf: used tx queue should be enabledDamjan Marion2-2/+8
Change-Id: I51cc4522df2dd6682148a13e7e1903850b4b3d08 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-26avf: request queues supportJakub Grajciar3-3/+68
Change-Id: I3a4529ff8dae70da99ec95c39ddf788c9498f478 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-07-26avf: fix interrupt modeDamjan Marion2-2/+25
- assign rx thread on interface create, not on admin up - keep interrupts unmasked all the time as they are needed for writeback - forward interrupt to graph dispatcher only if queue is in the interrupt mode Change-Id: I5cc5afe24960143bef08f12d59fbd80ae0c6ccf8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-25VPP-1332 memif: add/del socket filename bugfixJakub Grajciar1-1/+27
in case of relative path, create subdirs inside runtime dir. in case of absolute path, if folder does not exist return error. Change-Id: I01fe018102c69deb105160cfa18b741541d76c82 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-07-25avf: api fixJakub Grajciar4-7/+25
avf_create_reply returns software index for the new interface Change-Id: I8a6b1a1985b072efafa24eb258b1f2cb1bea1110 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-07-24Create a unit-test pluginDave Barach6-0/+2386
Move the tcp unit test to the plugin Add a bihash unit test and a "make test" program to call it Adjust framework.py to load the plugin, which is disabled by default Change-Id: Ic229d386a56a9d28dbd54974f231149053ca8f93 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-23tls: avoid possible async handler duplicationPing Yu1-1/+1
One handler is good enough when engine sends out a retry status Thus this patch will just go one branch Change-Id: Id81cb3fa67d2b322b0fe1b2f62cd866cf3491eb4 Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-07-23NAT44: fix forwarding feature bug (VPP-1349)Matus Fabian1-3/+3
Change-Id: I5009fcfde5c627d59dea3edda15486b9392134a2 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-07-23fix vector index range checksEyal Bari3-11/+6
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-0/+1
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-20avf: don't enable interrupts before interface is admin upDamjan Marion1-1/+0
Change-Id: I0fc19dd109e569f2c407a85e8fa32758e06676b8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-20NAT44: in+out interface in STN setup improvement (VPP-1344)Matus Fabian1-8/+26
Change-Id: Iad7e0337a577ef8a0dfb7bde1968cc115d176043 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-07-20avf: Support interrupt modeSteven2-1/+5
DBGvpp# set interface rx-mode AVF0/4/2/0 interrupt set interface rx-mode AVF0/4/2/0 interrupt DBGvpp# sh int rx sh int rx Thread 0 (vpp_main): node dpdk-input: FortyGigabitEthernet6/0/0 queue 0 (polling) node avf-input: AVF0/4/2/0 queue 0 (interrupt) DBGvpp# sh int addr sh int addr AVF0/4/2/0 (up): L3 133.1.1.10/24 FortyGigabitEthernet6/0/0 (dn): VirtualEthernet0/0/0 (up): L3 192.168.42.1/24 DBGvpp# clear run clear run DBGvpp# clear interfaces clear interfaces DBGvpp# sh int rx sh int rx Thread 0 (vpp_main): node dpdk-input: FortyGigabitEthernet6/0/0 queue 0 (polling) node avf-input: AVF0/4/2/0 queue 0 (interrupt) DBGvpp# ping 133.1.1.3 repeat 1 ping 133.1.1.3 repeat 1 64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.6237 ms Statistics: 1 sent, 1 received, 0% packet loss DBGvpp# sh int sh int Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count AVF0/4/2/0 5 up 9000/0/0/0 rx packets 1 rx bytes 98 tx packets 1 tx bytes 98 drops 1 ip4 1 FortyGigabitEthernet6/0/0 1 down 9000/0/0/0 VirtualEthernet0/0/0 2 up 9000/0/0/0 local0 0 down 9000/0/0/0 DBGvpp# sh run sh run Time 41.9, average vectors/node 1.00, last 128 main loops 0.00 per node 0.00 vector rates in 2.3858e-2, out 2.3858e-2, drop 2.3858e-2, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call AVF0/4/2/0-output active 1 1 0 1.24e4 1.00 AVF0/4/2/0-tx active 1 1 0 4.28e4 1.00 api-rx-from-ring any wait 0 0 2 6.94e4 0.00 avf-input interrupt wa 1 1 0 1.09e4 1.00 avf-process any wait 0 0 47 1.01e4 0.00 ... DBGvpp# DBGvpp# set interface rx-mode AVF0/4/2/0 polling set interface rx-mode AVF0/4/2/0 polling DBGvpp# sh int rx sh int rx Thread 0 (vpp_main): node dpdk-input: FortyGigabitEthernet6/0/0 queue 0 (polling) node avf-input: AVF0/4/2/0 queue 0 (polling) DBGvpp# ping 133.1.1.3 repeat 1 ping 133.1.1.3 repeat 1 64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.2038 ms Statistics: 1 sent, 1 received, 0% packet loss DBGvpp# Change-Id: Ib7d2b505ae4bb74a052263af766ca37d9df7bfe4 Signed-off-by: Steven <sluong@cisco.com>
2018-07-19dpdk: fix Mellanox Connect-X3 VF IDMatthew Smith1-1/+1
Fix a typo from previous patch. Change 0x104 to 0x1004. Change-Id: I82230a8a0ec01567eb1d4bc12ac02062c2a98347 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion8-33/+21
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-19Add a new communication channel between VPP and openssl enginePing Yu3-19/+59
Thus when engine buffer is full during a burst in performance tesing, this code will help VPP handle retry machansim. Change-Id: I0f9fc05d3dba8a54d34dca4c6137700d6c80f714 Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-07-19Fix IPv6 csum calculation in GTP-U encapsulationAndreas Schultz1-24/+25
The length field is included in the checksum. Therefor, we need to update it before calculating the checksum. Change-Id: Id23234efb80ea3747a0f8a5c7bf8621748d27635 Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-07-19dpdk: set log write fd to non-blockingMatthew Smith1-7/+15
If a PMD writes too many log messages using rte_vlog(), the pipe for logging can fill and then rte_vlog() will block on fflush() while it waits for something to read from the other side of the pipe. That will never happen since the process node that would read the other side of the pipe runs in the same thread. Set the write fd to non-blocking before the call to rte_openlog_stream(). If the pipe is full, calls to write() or fflush() will fail but execution will continue. Change-Id: I0e5d710629633acda5617ff29897d6582c255d57 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19dpdk: add device IDs for Mellanox ConnectX-3Matthew Smith1-1/+6
Recognize the PF and VF device IDs for the Mellanox adapter used on Azure. Change-Id: Ic7b36b37ac93db2b696354ffe6fa2b6d62ee3801 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19gbp: Add support for ACLMohsin Kazmi6-58/+178
Change-Id: I7513c41307e62068ab5d9739cac393675c6066f8 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-18DPDK: coverity scan warningsMarco Varlese2-7/+4
This patch addresses the coverity scan warnings reported for the DPDK plugin. Change-Id: Ie7ac7ffcf4a6c63245eae0f9910a193ab1e318a8 Signed-off-by: Marco Varlese <marco.varlese@suse.de>
2018-07-18Add config option to use dlmalloc instead of mheapDave Barach4-10/+20
Configure w/ --enable-dlmalloc, see .../build-data/platforms/vpp.mk src/vppinfra/dlmalloc.[ch] are slightly modified versions of the well-known Doug Lea malloc. Main advantage: dlmalloc mspaces have no inherent size limit. Change-Id: I19b3f43f3c65bcfb82c1a265a97922d01912446e Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-18VPP crash when run "lb set interface nat4 in <intc>" VPP-1343Hongjun Ni1-1/+1
Change-Id: I23be9c29227e7dd1bb11b5b7fa910bb61c2be6c9 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com> (cherry picked from commit b4b2488202ff4282cc4a7bd779cc33934286c5cd)
2018-07-18Fix GTP-U length header field in encodingAndreas Schultz2-11/+23
The length in the GTPU header does not specify the length of the payload. It does specify the number of bytes following the fixed part (the first 8 bytes) of the GTPU header (see 3GPP TS 29.060, Sect. 9.3.1). Change-Id: I8ce73df015e1cf1f38d306666962c0058756111c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-07-18Fix GTP-U header in 4x IPv4 vector encapsulationAndreas Schultz1-1/+1
The fourth GTP-U packet had a wrong reference, leading to data corruption. Change-Id: Id82f87368183d5e8b7047133c5ea799f2a9cb43c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-07-17memif: vectorized buffer enqueue in input nodeDamjan Marion1-146/+121
Change-Id: If6970788396c85415634f12304f49eed0d812281 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-16acl-plugin: fix coverity errors 186574,186575,186576,186577,183451Andrew Yourtchenko1-20/+1
Fix the copypaste-triggered errors in load-from-file ACL test code. Also, add an explicit exit(1) after clib_error() to convince coverity that code path is terminal indeed. Change-Id: I1deedb49144559c9183449005ada0433c24db18a Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-07-16Enable openssl TLS async support in client for HW acclerationPing Yu1-0/+15
Change-Id: I003e41786c549c6451a1e9e178f5871d32c20e6e Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-07-13Add QEDE poll mode driver (librte_pmd_qede)Igor Mikhailov (imichail)3-4/+10
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA) (doc/guides/nics/qede.rst) Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>