Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9c502a491ff56806a2e631f7a4c18903a2e93ab2
|
|
Type: improvement
When packets were received and processed successfully, increment the
byte/packet counters for the tunnel interface.
Change-Id: I42855607ac6916de641be42aac86c9942cc97140
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Currently, neighbor adjacencies on a wg interface are converted into a
midchain only if one of the peers has a matching allowed prefix
configured. If create a route that goes through a wg interface but the
next-hop address does not match any allowed prefixes, an ARP/ND request
will try to be sent via the wg interface to resolve the next-hop address
when matching traffic occurs. And sending an ARP request will cause VPP
to crash while copying hardware address of the wg interface which is
NULL. Sending an ND message will not cause VPP to crash but the error
logged will be unclear (no source address).
With this fix, convert all neighbor adjacencies on a wg interface into a
midchain and update tests to cover the case. If there is no matching
allowed prefix configured, traffic going such routes will be dropped
because of "Peer error". No changes if there is matching allowed prefix
configured.
Also, fix getting peer by adjacency index.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I15bc1e1f83de719e97edf3f7210a5359a35bddbd
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia66c12e1da126d0d8d101b645e6dc8454c3826d6
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic68627bbca676cc78b0be05bc1fa0f386f5d27fa
|
|
Type: fix
A packet passing through nat44-ei-in2out-output,
has its ttl value validated in earlier nodes.
"ip4-input" node checks ttl for locally generated packets.
"ip4-rewrite" node validates ttl in forwarded packets.
Thus for example, the ED counterpart disables ttl checks
in its "nat44-ed-in2out-output" node.
This patch updates nat44 EI conditions for ttl checks to
those currently used in nat44 ED case, meaning no extra ttl
validation for in2out when output-feature is enabled.
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
Change-Id: Idd15d7c9a746b60c0a6dac5537d00ef10c257fdc
|
|
Type: fix
Correct vnet_hw_interface_t flags update on link state changes.
Currently incomplete set of flags is applied on each change,
only flags related to the most recent change are being set correct.
E.g. setting the link up would erase the duplex part of the flags.
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
Change-Id: I5b95e1c0eaea0c283b108dbf7f809682ec9064eb
|
|
Type: fix
Don't set link speed for tap interface when link speed is unknown
Signed-off-by: Anton Nikolaev <anikolaev@netgate.com>
Change-Id: Ia97277b3bf7c958fa665e4ead8d0e48f02921e69
|
|
single struct to hold all api handler, flags, etc.
Provide functions to toggle flags instead of writing directly to
internal data.
Type: refactor
Change-Id: I4730d7290e57489de8eda34a72211527e015b721
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I480b1fcace1c27a5cb2d2956cec80b379105b55d
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
Type: fix
There were several places where mbps were converted to kbps for
link_speed, but often drivers of devices set link speed to unknown
(0xFFFFFFFF) on initialization, so there was multiplication of
link_speed equal 0xFFFFFFFF(UINT32_MAX) by 1000, this provides
overflow of unsigned int, and as result link_speed was equal
4295 Gbps, but actually link_speed is unknown.
Signed-off-by: Anton Nikolaev <anikolaev@netgate.com>
Change-Id: Ib462ed6ed685654af4687041e115bfb74e640f13
|
|
The statement
pw0->pending_clear_sw_if_index_bitmap =
clib_bitmap_dup (pw0->serviced_sw_if_index_bitmap);
will cause pw0->pending_clear_sw_if_index_bitmap's previous
vector to be gone. Need to free it prior to calling clib_bitmap_dup()
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I20de780e73daea7be17efa0bf660af2592cd4680
|
|
Type: improvement
With this change:
- add dump/details messages to obtain interfaces for which IPFIX flow
record generation is enabled;
- add get message to obtain parameters;
- add a new message to set parameters with validation present and to
correspond with get/set naming;
- add tests for get/set parameters and dump/details interfaces.
Change-Id: I09f6ec990171ac8bcb9d2f5c92629803b8ab6c28
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: improvement
Change-Id: I82e7c0acc547794bcc7c42f4b8881a8251bf7a9b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When the driver's max_rx_pktlen is >= 65536, max_supported_frame_size
overflows and queue creation fails.
Change-Id: If78707cb698adf8619ec44a852dd05d570917577
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: feature
Currently, the plugin supports only IPFIX flow record generation for
outbound packets.
With this change:
- add a new API message for enabling the feature on an interface that
accepts direction (rx, tx, both);
- update existing debug command for feature enabling to accept
direction;
- update existing debug command for showing currently enabled feature
on interfaces to display direction;
- update templates to include a direction field;
- generate flow records on the specified direction and data path;
- report direction in flow data;
- update tests to use the new API;
- add tests for inbound flows.
Change-Id: I121fd904b38408641036ebeea848df7a4e5e0b30
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
- add pnat_binding_add_v2 which explicitly requires match mask to
set to PNAT_PROTO if we want to match on IP Protocol
- fix pnat_binding_add backward compatibility i.e. no need to set
match mast to PNAT_PROTO
Type: improvement
Signed-off-by: Fahad Naeem <fahadnaeemkhan@gmail.com>
Change-Id: I5a23244be55b7d4c10552c555881527a4b2f325f
|
|
This mempool flag should be cleared when the mempool is populated, to
reproduce the behaviour of rte_mempool_populate_iova in DPDK 22.03
Change-Id: I4c0e07efca9df2e472e8e393689127c01cf66da2
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
Fixes: 2f132efc3cafde5a0dd01ef8a91606528970cdf7
|
|
Drop pycodestyle for code style checking in favor of black. Black is
much faster, stable PEP8 compliant code style checker offering also
automatic formatting. It aims to be very stable and produce smallest
diffs. It's used by many small and big projects.
Running checkstyle with black takes a few seconds with a terse output.
Thus, test-checkstyle-diff is no longer necessary.
Expand scope of checkstyle to all python files in the repo, replacing
test-checkstyle with checkstyle-python.
Also, fixstyle-python is now available for automatic style formatting.
Note: python virtualenv has been consolidated in test/Makefile,
test/requirements*.txt which will eventually be moved to a central
location. This is required to simply the automated generation of
docker executor images in the CI.
Type: improvement
Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Replace code with branchless code.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ic38a20ad33483c1c26f90a927f8b963b0ead4a87
|
|
- fix branch prediction for checking rdma ERROR flag
- add the missing right angle bracket to help message
Type: improvement
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Reviewed-by: Lijian Zhang <lijian.zhang@arm.com>
Reviewed-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I2ce667631b3e3f60939069e2a16ddba0ff12a695
|
|
Add vapi_connect_from_vpp() and vapi_disconnect_from_vpp()
calls to allow API clients from within VPP process.
Add a new memclnt_create version that gives the user a
knob to enable or disable dead client scans (keepalive).
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id0b7bb89308db3a3aed2d3fcbedf4e1282dcd03f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This patch fixes two problems:
1. The lease field in the dhcp_compl_event message can include a list of
vl_api_domain_server_t structs, but no memory is allocated for it.
2. The DNS server address is not copied properly, resulting in wrong IP4
addresses in the event message.
Type: fix
Signed-off-by: Jing Peng <pj.hades@gmail.com>
Change-Id: I42c533e7af697568c69714011d983f88368a7e15
|
|
Type: improvement
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I446eb86c097d1bf99f05ee47f1c550689d70ced2
|
|
Type: improvement
Change-Id: If3a83848ae0741334887c654b65e424b99caa73c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: I792467b73449074e59c4232b1f82d134c399624c
|
|
Enable the flow action for RSS queue group. Packets can be distributed
among queues in group based on specific fields. Queues must be continous
in the group. This feature is to support 5G enhancement requirement.
Type: feature
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: I74fdc617659bcb61f00b3b1934c95ab1c73bb8f3
|
|
Supports more connections and track connect time. Can be used to measure
CPS. Only works in unidirectional mode for now.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I70bc6a271996407dd16a96115f509bd680a0f302
|
|
The RFC7857 state machine introduced in 56c492a is a trade-off.
It tries to retain sessions as much as possible and also offers
some protection against spurious RST by re-establishing sessions if data
is received after the RST. From experience in the wild, this algorithm is
a little too liberal, as it leaves too many spurious established sessions
in the session table.
E.g. a oberserved pattern is:
client server
<- FIN, ACK
ACK ->
ACK ->
RST, ACK ->
With the current state machine this would leave the session in established state.
These proposed changes do:
- require 3-way handshake to establish session.
(current requires only to see SYNs from both sides)
- RST will move session to transitory without recovery if data is sent after
- Only a single FIN is needed to move to transitory
Fixes: 56c492aa0502751de2dd9d890096a82c5f04776d
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I92e593e00b2efe48d04997642d85bd59e0eaa2ea
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Set is_add function argument to 0 when deleting interface role.
Change-Id: I6ca88d6511e1c88285e51b3750eb501fde2b341b
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If7dd56e76efc31ed66b865e2c7231d22ec2322b4
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5e49f43b18ff011ce0b7259ed58854d81f910826
|
|
Type: fix
Free the old rewrite string before assigning a new rewrite string for the updated new tteid value.
Signed-off-by: Leung Lai Yung <benkerbuild@gmail.com>
Change-Id: I1ec19bce6afda3dfdc31c8724b32ac7b9bc84e89
|
|
The sys/random.h header, which provides the getrandom syscall wrapper,
was only added in glibc2.25. To make it compatible with older version,
we can directly call the syscall.
Type: improvement
Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
Change-Id: I93c5f8a49c0323511a4e34273f0b3c0e24663bfd
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9cf21ee7ad363dd1af5ca75f07bfe38d8fe749f9
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I45c63e0a7d7179a0f27ca3f093bd3cf7458a12d3
|
|
In test_bihash_threads, if a test thread fails to be created,
it is still counted towards the total thread count, which could
lead to never-ending test loop. This patch fixes the issue.
Type: fix
Signed-off-by: Jing Peng <pj.hades@gmail.com>
Change-Id: Ic0f1d4dde9c5ea672b52f0e2e49f16d42f982b77
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I805131b4e3d0cb2fab1d3bf76db659c67522c2e8
|
|
This patch fixes test_bihash_unittest in two ways:
1. The number of searches, namely tm->search_iter, defaults to 0,
thus disabling the test. This patch changes the default to 1.
2. Test errors are reported by clib_warning() instead of being
returned, thus the caller test/test_bihash.py is never aware of them.
This patch returns the errors constructed by clib_error_return().
Type: fix
Signed-off-by: Jing Peng <pj.hades@gmail.com>
Change-Id: I60e99a829ebe6aa2a56e7a9332cf973afa100311
|
|
Type: fix
Fixes: 616447c39231
In lcp_router_link_mtu(), either vnet_hw_interface_set_mtu() or
vnet_sw_interface_set_mtu() is called, based on whether this appears to
be a physical interface. The test to determine whether this is true was
incorrect and probably never worked right so vnet_sw_interface_set_mtu()
was always being called. This causes some breakage with Recent changes
to code which manages interface MTUs. Fix the test so the right function
is called.
Change-Id: I1ecccbce37d5a1e53b2349ed40f3d0d27eb03569
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I9f061a05d947bc2867e1b962bf0522ad344bcc1a
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia4d8aaafeb3629f421601edffefe9c61c3e69dba
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I68ada775810bb4a4f280962a979605b211562a52
|
|
An unexpected packet that shows up on a Wireguard interace
that happens not to have a forwarding peer will cause a
segfault trying to index the vector of peers by adjacency.
Rather than segfaulting, recognize a non-adjacent packet
and drop it instead.
This leaves open the question of what _should_ be
happening to, say, IPv6 multicast packets.
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Type: fix
Fixes: edca1325cf296bd0f5ff422fc12de2ce7a7bad88
Change-Id: Ic0a29e6cf6fe812a4895ec11bedcca86c62e590b
|
|
New dpdk version deprecates some macros used by VPP.
This patch changes them to 22.03 version.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: Ic362ed318dc1ad88bb682ef13fbd6159171fbaef
|
|
New version of dpdk changes some macros names.
This patch ensures VPP will be compatible with older dpdk versions.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I3d9736278e70064610a1dcad5f2d2f6eb26e0d4b
|
|
Type: fix
Change-Id: I70f9ec2eb6c9c1494a4ecd56e06898f6162a0e0e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Two similar CLI paths "nat44" and "nat44 add interface address"
caused unexpected behavior. If "nat44 add interface address"
command would fail the vlib cli processing function would
call "nat44" handler. This would also clean any previously
set errors from the first command and basically return
same error returned by "nat44" handler for every failed
command that starts with the same path string.
Fixes nat44-ed and nat44-ei plugin.
Change-Id: I1aac85c8ae2932da582a2b78243521d1bf8a0653
Ticket: VPP-2021
Type: fix
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: refactor
Change-Id: I5ca142ec1557d5b5c3806b43553ad9d3b5ea1112
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I84d594d8baaf18056580455f3b2790d0f31b7b0f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|