summaryrefslogtreecommitdiffstats
path: root/src/plugins
AgeCommit message (Collapse)AuthorFilesLines
2018-05-25memif: Add support for loggingJakub Grajciar3-56/+90
Change-Id: I0fe60a639c7589dc842d85db092c81c1a7441cb7 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-05-25bond: performance harvestingSteven2-28/+8
- hash is great. But it is a bit too slow for the DP. Use direct array indexing to quickly retrieve the slave interface. - the algorithm used by flow hash is great. But it is a bit too slow for the DP. Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use of intrinsic crc32 instruction set. - shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to avoid division instruction. - special case for link count == 1 in bond_tx_fn() - use clib_mem_unaligned to access data for the packet to avoid alignment error - Fix some typos for packet tracing. Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25 Signed-off-by: Steven <sluong@cisco.com>
2018-05-23VPP-1283: IPv4 PMTU missing MTU value in ICMP4 message.Ole Troan1-1/+1
Change-Id: I7a4133c59ff45b0744b48e246a049d9f015026fc Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-23dpdk:flow add vxlan flow supportEyal Bari1-12/+77
Change-Id: Ic9f98c022e32715af395c9ed618589434eb0e526 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-22avf plugin: add support for loggingJakub Grajciar2-5/+14
Change-Id: Ic8c5b527395fc99f1e1a72e51f8d41c9b4f415df Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-05-22acl-plugin: refactor to introduce multiarch dataplane functionsAndrew Yourtchenko6-1615/+2036
This commit splits the functions from fa_node.c into the pure dataplane node functions (which are multiarch-compiled), session management node functions (which are compiled only once), and session find/add/delete functions which are split out into the inlines. As part of the refactoring: - get rid of BV() macros in the affected chunk of code, rather use the explicit bihash function names. - add the magic trailer to the new files to ensure make checkstyle watches them. - move the bihash_template.c include for 40_8 bihash into acl.c Change-Id: I4d781e9ec4307ea84e92af93c09470ea2bd0c375 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-05-22CSIT-928 dpdk/ipsec: performance improvementRadu Nicolau3-112/+114
Replace hash with a vector to improve performance. Plus other minor performance improvements. Change-Id: I3f0ebd909782ce3727f6360ce5ff5ddd131f8574 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-05-21dpdk:enable flow director perfect modeEyal Bari3-4/+25
when flows are enabled on the device Change-Id: I971764988d5a9e7078468f627205b3fa60736263 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-18Add vlib_buffer_enqueue_to_next inline functionDamjan Marion1-75/+3
Change-Id: I1042c0fe179b57a00ce99c8d62cb1bdbe24d9184 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-18Rework kube-proxy into LB pluginHongjun Ni19-4058/+1772
Add support of NAT66 Change-Id: Ie6aa79078a3835f989829b9a597c448dfd2f9ea3 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-05-17Add buffer pointer-to-index and index-to-pointer array functionsDamjan Marion2-106/+7
Change-Id: Ib3fcc3ceb7f315389bcdecbb7d9632540a5dd6ba Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-17flow:redirect to nodeEyal Bari1-2/+1
Change-Id: I4b6577b496c56f27f07dd0066fcfdfd0cebb6f1a Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-17NAT44: nat44_del_session and nat44_user_session_details API update (VPP-1271)Matus Fabian7-90/+246
Change-Id: I484d79000c1bbd87ff83847cf567bf3414a719d3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-05-16dpdk: fix rte_eth_dev_set_mtu callsites to use same mtu valueRui Cai1-1/+1
During dpdk_lib_init, it calculates MRU and MTU and later calls rte_eth_dev_set_mtu with calculated MTU value. However, dpdk_device_setup calls rte_eth_dev_set_mtu with hi->max_packet_bytes, which is set to be MRU value in dpdk_lib_init earlier. Most of the time, MRU != MTU in dpdk_lib_init and it looks like hi->max_packet_bytes is treated as MTU in other parts of vpp codebase. Therefore, dpdk_lib_init should be consistent and use MTU instead of MRU for hi->max_packet_bytes. Change-Id: I23ff2a6cd45d6bc819b6f64d5f0fc0490b8a44de Signed-off-by: Rui Cai <rucai@microsoft.com>
2018-05-16Fix broken compilation for non-numa aware platformsSachin Saxena1-0/+2
- The dpdk plugin always looks for libnuma library during compilation. For non-numa aware platforms compilation breaks, if third party libnuma lib is not available. - Issue is more severe with Cross Compilation scenario where one has to download and cross compile libnuma-dev package even when target platofrom is NUMA disabled. Like when cross compiling for ARM platforms, Linaro tool-chain doesn't have libnuma by default. Change-Id: Ib85b3188b787c23ba33b47e3f6123c74fd37190e Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
2018-05-14NAT44: delete closed TCP session (VPP-1274)Matus Fabian3-22/+68
Change-Id: Id25b447bddccb7b321123e4abc4134e7261a0807 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-05-13Improve ipfix template packet rewrite constructionDave Barach5-18/+53
Instead of repeatedly cutting, pasting, and hacking to create a new callback, use vnet_flow_rewrite_generic_callback(). Add three arguments to the flow rewrite callback: (in) pointer to an array of report elements, (in) length of array, (out) pointer to the stream index Change existing code prototypes. Code owners encouraged to evaluate whether they can use the generic callback or not, at leisure. /* ipfix field definitions for a particular report */ typedef struct { u32 info_element; u32 size; } ipfix_report_element_t; Best generated like so: _(sourceIPv4Address, 4) \ _(destinationIPv4Address, 4) \ _(sourceTransportPort, 2) \ _(destinationTransportPort, 2) \ _(protocolIdentifier, 1) \ _(flowStartMicroseconds, 8) \ _(flowEndMicroseconds, 8) static ipfix_report_element_t simple_report_elements[] = { foreach_simple_report_ipfix_element }; ... /* Set up the ipfix report */ memset (&a, 0, sizeof (a)); a.is_add = 1 /* to enable the report */ ; a.domain_id = 1 /* pick a domain ID */ ; a.src_port = UDP_DST_PORT_ipfix /* src port for reports */ ; a.rewrite_callback = vnet_flow_rewrite_generic_callback; a.report_elements = simple_report_elements; a.n_report_elements = ARRAY_LEN (simple_report_elements); a.stream_indexp = &jim->stream_index; a.flow_data_callback = simple_flow_data_callback; /* Create the report */ rv = vnet_flow_report_add_del (frm, &a, &template_id); if (rv) return rv; ... Change-Id: If6131e6821d3a37a29269c0d58040cdf18ff05e4 Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-12dpdk: Add constants for failsafe PMDRui Cai2-2/+13
Adding name, enum constants and formatting code for failsafe PMD. This is part of initial effort to enable vpp running over dpdk on failsafe PMD in Microsoft Azure(2/4). Change-Id: I4eb0093db9f666e2635f7ddff451e3c9064bd0c4 Signed-off-by: Rui Cai <rucai@microsoft.com>
2018-05-11dpdk: fix Unknown interface with Mellanox NICSteve Shin1-1/+1
When port_type_from_speed_capa() is called before the port link update isn't completed, xd->port_type becomes VNET_DPDK_PORT_TYPE_UNKNOWN. This happens with Mellanox NIC without lsc interrupt. Calling rte_eth_link_get before getting dev_info will ensure the link state is up-to-date. Change-Id: I83a59654778eb4bf0c65a4a4e225a326227b9641 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-05-10vppinfra: use count_trailing_zeros in sparse_vec_indexDamjan Marion2-8/+8
It is much cheaper to use ctzll than to do shift,subtract and mask in likely case when we are looking for 1st set bit in the uword. Change-Id: I31954081571978878c7098bafad0c85a91755fa2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-10NAT44: sessions counters per user fix (VPP-1270)Matus Fabian1-6/+6
Change-Id: I6306b81e0e1c3e1c591f929a76bb265c1c1d0859 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-05-10vnet: device flow offload infraDamjan Marion6-0/+363
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-10Change the way IP header pointer is calculated in esp_decrypt nodesSzymon Sliwa1-1/+7
The pointer to IP header was derived from l3_hdr_offset, which would be ok, if l3_hdr_offset was valid. But it does not have to be, so it was a bad solution. Now the previous nodes mark whether it is a IPv6 or IPv4 packet tyle, and in esp_decrypt we count get ip header pointer by substracting the size of the ip header from the pointer to esp header (which lies in front of the ip header). Change-Id: I6d425b90931053711e8ce9126811b77ae6002a16 Signed-off-by: Szymon Sliwa <szs@semihalf.com>
2018-05-10dpdk:fix tx countEyal Bari1-1/+2
Change-Id: I921465ea64b59d42674cc8f19069ed04e3b25026 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-09dpdk: fix free of tx dropped packetsFlorin Coras1-1/+1
Change-Id: I3669068f694614f8555b33bf0b703c41e45363ef Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-09dpdk: tx code reworkDamjan Marion3-261/+158
Change-Id: Ifea9c772e8784642433b92091f5769eb9ec06890 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-09dpdk:fix mbuf index typo'sEyal Bari1-4/+4
Change-Id: I387b22427b3f322969bcf32fcfc189123c8ed6ae Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-08NAT44: TCP connection close detection (VPP-1266)Matus Fabian7-13/+131
Change-Id: Iba1cc1179ee80478e29888790a6476571d1904dc Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-05-07dpdk: improve perf of buffer indices calc in the input nodeDamjan Marion1-34/+53
Change-Id: I16557189aa4a763ec496cb4a45f6e12f2d46971f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-04ipsec: allow null/null for crypto/integ algorithms pairRadu Nicolau1-0/+1
Change-Id: Ic1e189c22e3d344d165e0eab05ccb667eef088a9 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-05-04Flow: Rename IPFIX exporter.Ole Troan6-7/+7
Change-Id: I9363cf54b73f7cfd8622af6f1cb250438ea0d3b6 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach10-2/+33
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-05-04Fix format for the dst address in the STN traceMilan Lenco1-2/+2
Output string 's' was not assigned the return value of format() for the destination address, which, in case the underlying memory was moved by the realloc, resulted in an invalid memory access by the subsequent invocations of format(). Change-Id: I2b5dfd85db085c553ca5ec0b3257aeeb437c360a Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2018-05-03NAT: fix bin API dump of static mappings.Milan Lenco1-2/+5
Static mappings with equal local and external IPs but different ports were dumped as identity mappings. Change-Id: Ifea7cef5b78aea4c2eb31cf1620185eeef2681e5 Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2018-05-03NAT44: fix VAT nat44_user_session_detailsMatus Fabian1-4/+5
Change-Id: If379247f0574fbfcca39e752684bf6c81b95187b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-05-03NAT44 segv on unknown proto on inside interfaceMatthew Smith1-22/+25
When a packet with an unknown proto arrives on an inside interface and there are no existing sessions for the source address, a segv occurs. snat_in2out_unknown_proto() finds the head of the sessions dlist, fetches the address of the next element using head->next, and then dereferences the next element. On the first packet received from a source address, head->next is ~0, so this results in a segv. Check that the session list is not empty before trying to traverse it. Also removed unnecessary lookup against tsm->user_hash. Prior call to nat_user_get_or_create() already performed that lookup and added a user if one didn't exist. Change-Id: If73e79aa2f8e3962ab7b876ecf55aea40d7a5472 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-04-30plugins: dpdk: fix check which makes not sense, likely a typoSzymon Sliwa1-1/+1
Change-Id: If33854f9c32736edf571fb66cdfa759db1c9de25 Signed-off-by: Szymon Sliwa <szs@semihalf.com>
2018-04-27A bit of buffer metadata reshuffling to accommodate flow_idDamjan Marion1-1/+1
Change-Id: I2794384557c6272fe217269b14a9db09eda19220 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-26NAT44: disable nat44-hairpinning feature for in-out interface (VPP-1255)Matus Fabian1-10/+20
Change-Id: Icd42abf4e35db550df496592cffce655f1987d68 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-04-25igmp: disable debug messagesDamjan Marion1-1/+1
Be gentle with people who run VPP in the noisy envirement where not-for-us IGMP messages are flying around... Change-Id: I07e74e29bc12ecdcc83faead9182d861c7ea1add Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-25dpdk: complete rework of the dpdk-input nodeDamjan Marion7-465/+556
Change-Id: If174d189de40e6f9ffae99997bba93a2519d9fda Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-25GBPv6: NAT66 actions for GBPNeale Ranns1-1/+12
Change-Id: I379150a88f2d53d6281be41e8bad6fc4f4e88a71 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-25ABF: remove the inclusion of version.h from abf_policy so it does not ↵Neale Ranns2-8/+6
recompile each time Change-Id: I97ef0ef5f694062e5867e11d434e3b521a57f649 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-25Fix some build warnings about "Old Style VLA"Juraj Sloboda1-3/+3
Change-Id: I69fee1dcf07a4d2eed69a59f0a36e63e3741ed4e Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-04-25STN: use the punt feature arcsNeale Ranns1-79/+28
Fixes: - the parsing of the packet falsely assume an ethernet header at offset 0 - it causes a frame leak Change-Id: Ib9ac9535173ed216de613baaa06d0e1dea3640ca Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-25ipsec: make crypto_worker_main_t a full cache line in sizeFlorin Coras1-0/+1
Change-Id: I927c9358915e03187cf7d3098c00b85b5ea2f92d Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-04-25igmp: data structure refactoringJakub Grajciar5-350/+820
Improve igmp membership report performance, introduce group and source specific timers. (side effect compatible with Group-specific query). Change-Id: Ie3dd2c0dabe5f7138c2f8029e6bbbbfcb5e4904f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-04-24lacp: deleting the bond subinterface may cause lacp to lose the partner ↵Steven2-15/+8
[VPP-1251] Problem: When the bond subinterface is removed, it was observed that we lost the lacp partner. Show hardware shows rx counter goes up, but show interface does not for the slave interfaces. Cause: We reset the interface promiscuous mode when the bond subinterface is deleted. This causes dpdk not to accept any packet. Leave the interface in promiscuous mode fixes the problem. Other fixes: There are few places we use hw_if_index as if they are sw_if_index. But they don't necessarily have the same value. As soon as a subinterface is created, they start to diverge. The fix is to use the correct API for the hw_if_index and sw_if_index. Change-Id: I1e6b8bca0a4aae396d217a141271cbf968500c91 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 42c6599bf3057a7e8f4f00f5b6a9dd72af48d283)
2018-04-24NAT44: one-armed NAT and identity mapping (VPP-1212)Matus Fabian1-3/+10
Change-Id: I228728bacfca6056dc409a96de1bffb9cadcd3e6 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-04-23lacp: partner may time us out if fast-rate is configured [VPP-1247]Steven5-8/+14
We should be sending LACP PDU every second if the partner has LACP_TIMEOUT flag set which means it will time us out in 3 seconds. Add interface name for lacp trace Change-Id: If7d816c062d03e80cc0dd7d10dba0b76ace0664a Signed-off-by: Steven <sluong@cisco.com>