Age | Commit message (Collapse) | Author | Files | Lines |
|
Use VLIB_MAIN_LOOP_ENTER_FUNCTION to do post init initialization for
dpdk crypto rather than create a one-time process to do the same.
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: I06e480b028c8e1fc1b0024a66b2338eb21a797ca
|
|
Fix the shown crypto inflight counts which were reversed. Also improve a
couple error descriptions to tell them apart when viewed.
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: I6d4054c64aa842658cfcde8969c7aa48f6d21207
|
|
This patch aims to improve decap performance by reducing expensive
hash_get callings as less as possible using AVX512 on XEON.
e.g. vxlan, vxlan_gpe, geneve, gtpu.
For the existing code, if vtep4 of the current packet match the last
vtep4_key_t well, expensive hash computation can be avoided and the
code returns directly.
This patch improves tunnel decap multiple flows case greatly by
leveraging 512bit vector register on XEON accommodating 8 vtep4_keys.
It enhances the possiblity of avoiding unnecessary hash computing
once hash key of the current packet hits any one of 8 in the 512bit
cache.
The oldest element in vtep4_cache_t is updated in round-robin order.
vlib_get_buffers is also leveraged in the meanwhile.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: Junfeng Wang <drenfong.wang@intel.com>
Change-Id: I313103202bd76f2dd638cd942554721b37ddad60
|
|
Type: feature
This adds api calls for the following CLIs:
* set sw_scheuduler worker <N> crypto on|off
* set crypto async dispatch polling|interrupt
* set crypto handler
* set crypto async handler
Change-Id: Ic701d149c440e42ea4575da42b9f69e4c8759602
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
This patch adds new sw_scheduler async crypto engine.
The engine transforms async frames info sync crypto ops and
delegates them to active sync engines. With the patch it
is possible to increase the single worker crypto throughput
by offloading the crypto workload to multiple workers.
By default all workers in the system will attend the crypto
workload processing. However a worker's available cycles
are limited. To avail more cycles to one worker to process
other workload (e.g. the worker core that handles the RX/TX
and IPSec stack processing), a useful cli command is added
to remove itself (or add it back later) from the heavy
crypto workload but only let other workers to process the
crypto. The command is:
- set sw_scheduler worker <idx> crypto <on|off>
It also adds new interrupt mode to async crypto dispatch node.
This mode signals the node when new frames are enqueued
as opposed to polling mode that continuously calls dispatch node.
New cli commands:
- set crypto async dispatch [polling|interrupt]
- show crypto async status (displays mode and nodes' states)
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Signed-off-by: DariuszX Kazimierski <dariuszx.kazimierski@intel.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I332655f347bb9e3bc9c64166e86e393e911bdb39
|
|
Let twice-nat static mapping pick specific
address from the twice-nat pool.
Type: improvement
Change-Id: Iadaa036af2fa3b0e6e9a68ff6e68b4bbe1650eb1
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: feature
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Iec28fb11b6edff1bee23117f56aa3a3e5729541a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4930c3c2a8025ec9ceb17e994137be67d88d455f
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
In one's complement, there are two representations of zero: the all
zero and the all one bit values, often referred to as +0 and -0. See
RFC 1624 section 3 for more details.
This used to be taken care of in ip4_header_checksum(), but it is no
longer the case. The check ip->checksum == ip4_header_checksum (ip) is
no longer correct in the -0 case.
Always use ip4_header_checksum_is_valid() instead (which behaves
correctly since 9a79a1ab931c3b5a7ae07d6f0fcfef7c4368a2c4).
Type: fix
Fixes: e5f0050c7a5d411f96af6401797529d58825e2af
Change-Id: Iacc6b60645a834287b085aecb9e3fdb4554cf0cf
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I87c6f423ea8fdd9fb764693055eb1509f994d6f1
|
|
Type: fix
Change-Id: I5287f6326726780c09e515eede0992bafb413bb2
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Translation memory size is internally a uword, but in api it was u32,
resulting in the returned value being 0 all the time.
Fix the "incorrect" API reply to return a u32 capped to 0xffffffff if
the u64 is larger than that, introduce the message with
the correct type, deprecate the message with the incorrect type.
Also, while we are updating the message definition,
add the max translations / max users per worker thread
into the new message.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I92e38a6a2bcb70fc8d1b129bbe416bf7f9e54280
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Make it shorter and same format when converting to biggor or smaller
types.
Type: refactor
Change-Id: I443d67e18ae65d779b4d9a0dce5406f7d9f0e4ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I85aa4ad6b68c1aa0e51938002dc691a4b11c545c
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
allocation, the remainder modulo 8 must be returned to the pool so that the number of kept buffers is a multiple of 8.
Type: fix
Change-Id: Ifd97b03ea220300e7e6fe81a8ff4a25060fea6c1
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
This is the code refactor for vnet/flow infra and the dpdk_plugin flow
implementation. The main works of the refactor are:
1. Added two base flow type: VNET_FLOW_TYPE_IP4 and VNET_FLOW_TYPE_IP6
as the base the flow type
2. All the other flows are derived from the base flow types
3. Removed some flow types that are not currently supported by
the hardware, and VPP won't leverage them either:
IP4_GTPU_IP4, IP4_GTPU_IP6, IP6_GTPC, IP6_GTPU,
IP6_GTPU_IP4, IP6_GTPU_IP6
4. Re-implemented the vnet/flow cli as well as the dpdk_plugin
implementation
5. refine cli prompt
6. refine display info in command "show flow entry"
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ica5e61c5881adc73b28335fd83e36ec1cb420c96
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I64a99a4fbc674212944247793fd5c1fb701408cb
|
|
When we have both format blacklisted devices like:
blacklist 1234:5678
blacklist 1234:56:78.0
unformat with fmt=%x:%x matches for both strings
and the rest 78.0 substring is kept in input
and it can't be parsed for init args
This patch checks first if device format matches PCI address and
just then if it matches Vendor and Product
Type: fix
Change-Id: If111762c0e0a424b052e4f6dc0f67731bf89dc2a
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
|
|
Some of the tests are time-sensitive, and at present require a non-trivial
modification in order to run at high concurrency.
Without these modifications, they intermittently fail, and require
the test retries.
Rather than setting them to the extended tests and forgetting
about them, put them into a "solo" set, which gets run in a
single-threaded mode after the rest of the tests are done.
Mark a few of the tests that showed errors during TEST_JOBS=48
as forced-solo.
Also, give a better diagnostic if the testcase misses a docstring
needed to represent it in the diagnostic outputs.
Type: fix
Change-Id: I33fe62eb17edc1885bd2c3523892051d52da6546
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Endian handlers was not registered for reply messages.
Causing endian-neutral handlers to crash.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id14173300ee1ab2601e92d58c70d2fa260814b69
|
|
- Display the interface name upon successfully creating the interface.
- Don't go silent when error occurs. Be explicit about it.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ie4fdaf323f8b3833ad4a7af3872290141204aba8
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I32a28a944fcee11657c4dd0ba34ad6d73de89263
|
|
Type: feature
Change-Id: I041bff2e8d589c171661de286fa1503531dff891
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I78017b02015116f93b579c7381119f618351c98d
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Change-Id: I57ae649d1b26d5bea2df89c209f257372e565b49
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Replace speculative buffer enqueue coding model with
vlib_get_buffers(...)/vlib_buffer_enqueue_to_next(...).
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ib5a32d60592fb17ed0ba1ac074047e39780f74be
|
|
fib table removal would leave lingering sessions in vpp
this patch is aimed at solving this issue by grouping
sessions by source and destionation fib. if one of the
fibs gets removed this grouping is tagged as expired
and session won't be passed to non existing fib table
Ticket: VPPSUPP-93
Type: improvement
Change-Id: I45b1205a8b58d91f174e6feb862554ec2f6cffad
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: refactor
Change-Id: I0bb203102a0e13dd7448e2125925ab356bbd7937
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Some statistics counters were implemented as error counters. Move them
to stat segment, where they belong.
Type: improvement
Change-Id: I5600bec1b4e0496282297374ec1e79d909cdaf8a
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
The "ACL as a service" lookup infra is shared, so a global heap must
be used.
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I86894254b737392c1968b6a581b5a37590376428
|
|
Represent pointers directly in shared memory and require clients to adjust for
shared memory segment being mapped at different base address.
Deprecated: stat_segment_pointer() / stat_segment_offset()
Added: stat_segment_adjust()
Bumped the stat segment version to 2.
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I33e756187b8903b45dcd353e6c1a101b7a4acb79
|
|
Type: fix
A struct that is used as a hash key was being initialized in its
declaration. On CentOS 8 this caused some hash lookups to fail.
This seems to be caused by uninitialized padding.
Use clib_memset() to initialize the key with 0's to avoid the issue.
Change-Id: I00555c201a1ab34133971313ba14f20f4e867a30
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
vlib_increment_combined_counter takes sw_if_index, not hw_if_index.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Iecde2697ed490940f0eff796d28d15381405b895
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
|
|
Type: test
Change-Id: I490c1b1a2fa49badda038e6be014c77b9bee6c56
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic93a598051d437a5801d794b678edf6e73d42a47
|
|
Reorder delayed packets, i.e., flush instead of delay, with a configured
rate.
Type: feature
Change-Id: Ib1294f5f1c9b6e98a12b1bb0be655e54facfed3a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I9c62bb6524247e2cd25de198263c16f3d9db0da9
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibb380eecca76ed9c00ed14c167dfcf576f943db0
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6832e3f24a56e043415a32eb4072d0bfb7697251
|
|
- Replace textual string slave with member except APIs.
- For APIs, mark the existing APIs as deprecated and introduce new APIs
- While introducing sw_bond_interface_dump, add the optional filter by
sw_if_index and enhance the testcases to make use of it.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ib6626c514e45350308aeeda0decb70f3aba2f63e
|
|
Type: fix
Change-Id: Ie3d24b3df02d08fbb74d97f4e5ab0d79c35b0c0d
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I83f44711264376389989152666f3c71216146bdd
|
|
Type: fix
Change-Id: I8f776ce10ee8c29689db5ceef70df42dfb6b747c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Ticket: VPP-1897
Change-Id: I0245aceeb344efd29b1f9217c35889a8bbe1f744
Signed-off-by: jan_cavojsky <Jan.Cavojsky@pantheon.tech>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
By default, VPP automatically assignes for each tunnel
next available QAT device by order dev_id-que-pair.
In most cases we have more than one device and it can
greatly increase ipsec perfomance without any actions
with configuration from user if we use all the
devices first and first que-pairs
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Iac9fe74768775459e22f69bb3706b542090a9375
|
|
"ipv4"/"ipv6" option is not supported in acl_add_replace and
macip_acl_add_replace vat api.
Update its help message per actual api usage.
Type: fix
Change-Id: I8d34fac5f98bd78a46a5e98df05cd35182988dd8
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Jieqiang Wang <Jieqiang.Wang@arm.com>
Reviewed-by: Govindarajan Mohandoss <Govindarajan.Mohandoss@arm.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I96673c984077876e69b18b4126b55e70dc07b50f
|
|
Change the port number selection for new NAT sessions so that it
matches how the thread index is calculated from the port number for
out2in packets. Before this change there was a problem when the
largest port number in the range was used, that resulted in the wrong
thread index being selected when out2in packets arrive for that
session.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I936c389eb0d5df6168e18e5e44754de1cdad6ad1
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: I3eb51ea4f6c29005b0315cf488fcabb8543dfcd1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|