summaryrefslogtreecommitdiffstats
path: root/src/plugins
AgeCommit message (Collapse)AuthorFilesLines
2020-07-02nat: nat66 to pluginOle Troan14-480/+607
Type: refactor Change-Id: I8c1f0c02a4522c1f9e461ddadd59938579ec00c6 Signed-off-by: Ole Troan <ot@cisco.com>
2020-06-30tests: ikev2: add nat traversal & cert based auth testFilip Tehlar6-49/+253
Type: test Change-Id: I3e8e451c5deaf04f519a471369370c383d9cda3b Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-27vrrp: backup processes priority 255 advertisementMatthew Smith2-1/+381
Type: fix When accept mode is enabled, a backup VR will configure the VR virtual addresses locally and respond to packets sent to those addresses. This did not work when the primary VR is the address owner and sends advertisements using the virtual address as the source address. It also did not work when NAT was configured on the interface with the virtual address as the NAT pool address. In both cases, advertisements from other VRs would arrive and be dropped because they appeared to be spoofed - the source address would be an address that is configured as an interface address on the instance receiving it. When accept mode is enabled for a VR and the VR enters the master state, add an input feature on ip[46]-multicast for the interface which looks for VRRP advertisements, figures out whether they are for a VR which is configured with accept mode and is in the master state and kicks them straight to the VRRP nodes to avoid dropping them. Change-Id: I240ba1ee0b3fd6d693de729698c1181dc71bb08b Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-06-27lacp: add unit testSteven Luong1-0/+364
add test_lacp.py to cover basic lacp unit test Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I6f7f3d801956e54106f3c55cedaca186d81dad25
2020-06-27nat: replace speculative buffer enqueue modelKlement Sekera5-2278/+2107
Replace speculative buffer enqueue coding model with vlib_get_buffers(...)/vlib_buffer_enqueue_to_next(...). Type: improvement Change-Id: I7dbfac2234a7bd754c599857eb1d5b601da5bc7c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-06-27ikev2: add FEATURE.yamlBenoît Ganne1-0/+17
Type: docs Change-Id: Ie7836543e52bee08d12c565fbb6238d3e82ea3ce Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-06-27flow: add IPSec ESP/AH flowChenmin Sun1-0/+71
This patch adds the IPSec ESP/AH type flow support Have tested on E810 with Intel iAVF driver Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I6ab8e69f67c423cc4e33f3c363881a97cdb98c30
2020-06-27ikev2: remove unused fieldFilip Tehlar1-1/+0
Type: improvement Change-Id: I0893d7cd8b8ab9958f585ac564bd0638bc60e78a Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-25nat: avoid division by zeroKlement Sekera1-1/+8
Return error instead of dividing by zero. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I9f6a942e87ab87e8f1921e744ec1add45884e74a
2020-06-24nat: deterministic: disallow invalid configKlement Sekera2-5/+20
Prevent overflow if input network prefix is too small and crash on packet #1 due to vector not being allocated/initialized. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I3494cc62ce889df48cc59cc9340b5dd70338c3a8
2020-06-23nat: fix broken testKlement Sekera1-2/+14
Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I04952865b7e2b447763d0b67d120c3d933177646
2020-06-22nat: set buf error if can't create userKlement Sekera4-27/+9
Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I747d78966a7296dcbae54d54b0c165d407c8863d
2020-06-18ikev2: use both local and remote ID for profile lookupFilip Tehlar2-22/+50
Type: fix Ticket: VPP-1890 Change-Id: I9441d5afc38df7dabf6cccaead69dd32646d2a9e Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-18tests: add ikev2 test framework with basic test caseFilip Tehlar2-0/+651
Ticket: VPP-1905 Type: test Change-Id: Ie66fbd8e37eb5e69bd61b701ed3449366bee8c84 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-19nat: remove unused codeKlement Sekera2-47/+0
Type: refactor Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Icc55276c8a4c256049718610cb131a34dc8d0a80
2020-06-17docs: add more FEATURE.yaml documentationDave Barach1-0/+18
This patch documents the DNS plugin, vlib packet tracing, vnet feature arcs, and the vppinfra library. Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Idb16ec0593d428ce78fe8404374a823a56b4b420
2020-06-17nat: print hash table parameters in CLIKlement Sekera1-2/+13
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Id6ab7e2ca965e860ea3f96145a888e0f3ccf9778
2020-06-17nat: add more trex test scriptsKlement Sekera3-0/+206
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ia824d663c86d6a7c9bafe0206e9a93f93884739d
2020-06-16misc: fix sonarclound warningsDave Barach3-2/+11
Type: fix Ticket: VPP-1888 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I9c2fb926a5e010658088a74051c8c3462ff61734
2020-06-16nat: improve outside port selection & perfKlement Sekera4-87/+110
Prefer using source port form packet as outside port if possible. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I5c25f6a42386f38c9a6cc95bd7dda9f090b49817
2020-06-16gtpu: support separate rx-decap and encap-tx teid valuesJohn Lo6-76/+232
Support separate local and remote TEIDs, with local (or RX) one used for GTPU tunnel RX/decap and remote (or TX) one used encap/TX. Updated current gtpu API to support seperate RX/TX TEIDs and added new gtpu_tunnel_update_tteid API to allow changing TX-TEID of an existing GTPU tunnel. The current tunnel field "teid" is used for RX-TEID and a new field "tteid" is used for TX-TEID. Type: improvement Signed-off-by: John Lo <loj@cisco.com> Change-Id: I549d79750a34bb965036da298c0ca894d15c2c20
2020-06-15dpdk: cryptodev: fix non-null terminated stringsBenoît Ganne1-4/+4
Type: fix Change-Id: Ib6f423e24f1a8d8439cd7e8893e4605e10984d48 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-06-15ikev2: announce both 'ESN' and 'No ESN'Filip Tehlar1-1/+0
Type: fix Change-Id: If73b88b9478b9314df6d9163c3a13724d4253c80 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-11ikev2: don't add DH group in ESP transform proposalsFilip Tehlar2-10/+10
Type: fix Anouncing DH group in esp transform proposals will enable PFS which is not suppored now. This fixes issue during rekey when using strongswan as responder. Change-Id: Ib9f586113ae0ab9dc67e6ceadff43f8aac463820 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-11nat: properly scale out2in-ed hash on initKlement Sekera1-1/+3
Type: fix Fixes: a1018c166a468f7692ab621c743503914266f508 Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I86592f73a60fd146d3764e474f975881e940c244
2020-06-11nat: simplify bihash buckets/mem configKlement Sekera8-31/+95
Derive reasonable values from max translations/max users. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I41a96ab63ab138b4160cd60bd6df24fc73791c86
2020-06-10nat: optimize prefetchingKlement Sekera6-18/+18
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Iea1748e8e39d213fcb3f3b52379bd37a6dd6aa3d
2020-06-08nat: more long read after short write optimizationKlement Sekera15-1060/+1051
Replace whitespread (mis)use of snat_session_key_t by proper function arguments where applicable and inline functions to calculate hash keys instead of using structs for that. Make all hash tables use same network byte order port so that there is no longer a discrepancy between static mappings using host byte order while in2out/out2in tables using network byte order. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I80786d2f947c67824c101a13bb608f1fe1080f34
2020-06-07mactime: print error if feature not enabledDave Barach1-1/+8
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I8fbc4baefecf512573126c5085ed7a6e2e360fbe
2020-06-04nat: fix coverity warningKlement Sekera1-1/+1
Type: fix Change-Id: I0e87021b11009a955f5839bdb68af897145816c1 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-06-04ikev2: session cleanup after profile is deletedFilip Tehlar2-52/+119
Type: fix Change-Id: I3198461f3dfc13cd3cedf2b8611dc80bb6f959c8 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-04dpdk: cleanup, add rx queue structDamjan Marion5-59/+31
Type: improvement Change-Id: I3defde103ab245404de42d2be7abcb2c43d49a60 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-06-04nat: fixed input validationFilip Varga7-21/+22
Ticket: VPP-1887 Type: fix Change-Id: I341ac7b455926a106d736f4de6771aae655db82e Signed-off-by: Filip Varga <fivarga@cisco.com>
2020-06-04nat: add tracing for nat44-hairpinningKlement Sekera3-15/+84
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ife437f959e29d3de88bd7ee77221ada86fb03e80
2020-06-03nat: refactor mss_clamping to not depend on snat_main_tOle Troan9-68/+83
Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1110e425859a4f1f07952c91b50f263cb7323836
2020-06-02ikev2: remove unused hash computationFilip Tehlar1-4/+1
Type: improvement Change-Id: I99c2383dd0d30efd1837f3d10ff2e4cf3a784283 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-01nat: update ip4-udp src port for checksum == 0 pktsDave Barach1-3/+6
Otherwise, the out2in path will discard return-path traffic with probability 1.0. Type: fix Fixes: gerrit 23963 / f126e746fc01c75bc99329d10ce9127b26b23814 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I621ed99329c04ef358035747dde599c0016b58f5
2020-05-28dhcp: use per-thread vlib main instead of global oneBenoît Ganne1-2/+2
Type: fix Change-Id: I8890aa5cc3c576fc9fb68735549dfab721714310 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-05-27dhcp: vat support for the dhcp_client_dump APIDave Barach2-4/+33
Also: permanently solve ordering issues with the vpp builtin vat plugin loader, by explicitly loading vat plugins once we're sure that all data plane plugins have registered their APIs / API message handlers. Fix compilation / link errors when the vpp builtin vat plugin loader is disbled by cmake configuration. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id553c63ae860ebfc196c5ad4b55c19e08fec2c9e Signed-off-by: Ole Troan <ot@cisco.com>
2020-05-27ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo3-39/+68
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
2020-05-27dpdk: bump to DPDK v20.05Damjan Marion1-0/+7
Type: improvement Change-Id: I5f89fc3d994bd85d2c5138069ea2c58661814228 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-05-27nat: fix regarding vm arg for vlib_time_now callElias Rudberg1-1/+2
Change in snat_ipfix_header_create() to use thread-specific vlib_main_t *vm pointer to avoid problems with different threads accessing the same vlib_main_t data structure. This avoids assertion failure when vlib_time_now() is called with a vm corresponding to a different thread. Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: I2096c1debb5688d3b97e5ed9a0ea78d94053d8b7
2020-05-27api: make vpp api handlers endian independentOle Troan1-4/+7
Add a new boolean to signal that the API infrastructure should performan any required endian conversions for the API handler. am->is_autoendian[mm->msg_id_base + VL_API_MAP_ADD_DOMAIN] = 1; Similarly add new REPLY_ macros that perform endian conversion. These changes do not change the on-the-wire encoding of the API messages, and therefore the API CRC is not changed. Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I7588f8ccb38b2d1e8d85ea17be99bac43f756267 Signed-off-by: Ole Troan <ot@cisco.com>
2020-05-26ipsec: DES/3DES fixing the iv_len for openssl cryptoRajesh Goel1-1/+2
Type: fix Signed-off-by: Rajesh Goel <rajegoel@cisco.com> Change-Id: I8d128598b4c872f19b64c779c19b5908ba2f2c08
2020-05-25tcp: fix sack block validation on wrapFlorin Coras1-0/+26
Type: fix Fixes: 487507f Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ia9813ae09d14111dc8edac0fa6ab082e13ab6e2e
2020-05-25api: add new stream message conventionOle Troan3-30/+122
Instead of having to wrap dump/detail calls in control ping, send details messages in between a normal reply / request pair. As expressed in the below service statement. Example: service { rpc map_domains_gets returns map_domains_get_reply stream map_domain_details; }; define map_domains_get { u32 client_index; u32 context; u32 cursor; }; define map_domains_get_reply { u32 context; i32 retval; u32 cursor; }; To avoid blocking the main thread for too long, the replies are now sent in client message queue size chunks. The reply message returns VNET_API_ERROR_EAGAIN when there is more to read. The API handler must also include a "cursor" that is used to the next call to the get function. API handler example: REPLY_AND_DETAILS_MACRO (VL_API_MAP_DOMAINS_GET_REPLY, mm->domains, ({ send_domain_details (cursor, rp, mp->context); })); The macro starts from cursor and iterates through the pool until vl_api_process_may_suspend() returns true or the iteration reaches the end of the list. Client Example: cursor = 0 d = [] while True: rv, details = map_domains_get(cursor=cursor) d += details if rv.retval == 0 or rv.retval != -165: break cursor = rv.cursor or the convenience iterator: for x in vpp.details_iter(vpp.api.map_domains_get): pass or list(details_iter(map_domains_get)) Change-Id: Iad9f6b41b0ef886adb584c97708dd91cf552749e Type: feature Signed-off-by: Ole Troan <ot@cisco.com>
2020-05-24dpdk: del warnings that duplicate counters in espAlexander Chernavin2-12/+0
Type: improvement Change-Id: I51cbe5c76a88d7fa65fa24dc1528e4f991eba534 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2020-05-22avf: interrupt mode, support for WB_ON_ITRDamjan Marion2-57/+103
Type: improvement Change-Id: I5c944c3f82e0f278b64f28e09a74f24514c029f0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-05-22avf: improve link speed handlingDamjan Marion1-34/+36
Support VIRTCHNL_VF_CAP_ADV_LINK_SPEED. Type: improvement Change-Id: Ie45c9d557d0369464cbb6881ee1259ef3807d7d5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-05-22nat: fix dslite session port allocationVladimir Ratnikov1-4/+4
Fix allocation of port per dslite session. After each session is created per protocol, when new one should be created with new port, instead it's trying to create with the same port and while(1) loop is executed forever and VPP does not response Type: fix Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com> Change-Id: Ic91b8b07253498ef9846ca60bcd4c4c76a5fac91