summaryrefslogtreecommitdiffstats
path: root/src/plugins
AgeCommit message (Collapse)AuthorFilesLines
2018-07-19dpdk: fix Mellanox Connect-X3 VF IDMatthew Smith1-1/+1
Fix a typo from previous patch. Change 0x104 to 0x1004. Change-Id: I82230a8a0ec01567eb1d4bc12ac02062c2a98347 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion8-33/+21
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-19Add a new communication channel between VPP and openssl enginePing Yu3-19/+59
Thus when engine buffer is full during a burst in performance tesing, this code will help VPP handle retry machansim. Change-Id: I0f9fc05d3dba8a54d34dca4c6137700d6c80f714 Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-07-19Fix IPv6 csum calculation in GTP-U encapsulationAndreas Schultz1-24/+25
The length field is included in the checksum. Therefor, we need to update it before calculating the checksum. Change-Id: Id23234efb80ea3747a0f8a5c7bf8621748d27635 Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-07-19dpdk: set log write fd to non-blockingMatthew Smith1-7/+15
If a PMD writes too many log messages using rte_vlog(), the pipe for logging can fill and then rte_vlog() will block on fflush() while it waits for something to read from the other side of the pipe. That will never happen since the process node that would read the other side of the pipe runs in the same thread. Set the write fd to non-blocking before the call to rte_openlog_stream(). If the pipe is full, calls to write() or fflush() will fail but execution will continue. Change-Id: I0e5d710629633acda5617ff29897d6582c255d57 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19dpdk: add device IDs for Mellanox ConnectX-3Matthew Smith1-1/+6
Recognize the PF and VF device IDs for the Mellanox adapter used on Azure. Change-Id: Ic7b36b37ac93db2b696354ffe6fa2b6d62ee3801 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19gbp: Add support for ACLMohsin Kazmi6-58/+178
Change-Id: I7513c41307e62068ab5d9739cac393675c6066f8 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-18DPDK: coverity scan warningsMarco Varlese2-7/+4
This patch addresses the coverity scan warnings reported for the DPDK plugin. Change-Id: Ie7ac7ffcf4a6c63245eae0f9910a193ab1e318a8 Signed-off-by: Marco Varlese <marco.varlese@suse.de>
2018-07-18Add config option to use dlmalloc instead of mheapDave Barach4-10/+20
Configure w/ --enable-dlmalloc, see .../build-data/platforms/vpp.mk src/vppinfra/dlmalloc.[ch] are slightly modified versions of the well-known Doug Lea malloc. Main advantage: dlmalloc mspaces have no inherent size limit. Change-Id: I19b3f43f3c65bcfb82c1a265a97922d01912446e Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-18VPP crash when run "lb set interface nat4 in <intc>" VPP-1343Hongjun Ni1-1/+1
Change-Id: I23be9c29227e7dd1bb11b5b7fa910bb61c2be6c9 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com> (cherry picked from commit b4b2488202ff4282cc4a7bd779cc33934286c5cd)
2018-07-18Fix GTP-U length header field in encodingAndreas Schultz2-11/+23
The length in the GTPU header does not specify the length of the payload. It does specify the number of bytes following the fixed part (the first 8 bytes) of the GTPU header (see 3GPP TS 29.060, Sect. 9.3.1). Change-Id: I8ce73df015e1cf1f38d306666962c0058756111c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-07-18Fix GTP-U header in 4x IPv4 vector encapsulationAndreas Schultz1-1/+1
The fourth GTP-U packet had a wrong reference, leading to data corruption. Change-Id: Id82f87368183d5e8b7047133c5ea799f2a9cb43c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-07-17memif: vectorized buffer enqueue in input nodeDamjan Marion1-146/+121
Change-Id: If6970788396c85415634f12304f49eed0d812281 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-16acl-plugin: fix coverity errors 186574,186575,186576,186577,183451Andrew Yourtchenko1-20/+1
Fix the copypaste-triggered errors in load-from-file ACL test code. Also, add an explicit exit(1) after clib_error() to convince coverity that code path is terminal indeed. Change-Id: I1deedb49144559c9183449005ada0433c24db18a Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-07-16Enable openssl TLS async support in client for HW acclerationPing Yu1-0/+15
Change-Id: I003e41786c549c6451a1e9e178f5871d32c20e6e Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-07-13Add QEDE poll mode driver (librte_pmd_qede)Igor Mikhailov (imichail)3-4/+10
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA) (doc/guides/nics/qede.rst) Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-07-13srv6-as: Adding support for L2 trafficFrancois Clad3-38/+243
Change-Id: I72978c5957cb1acf154c9de7ad153092bac37785 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-07-13The gateway IP should be 172.16.2.1shenJibiao1-1/+1
Change-Id: I28d05a04abd11f630035d34ce573016c77ffab53 Signed-off-by: shenJibiao <shenjibiao@corp.netease.com>
2018-07-12IGMP: validate the packets length in the DPNeale Ranns3-25/+55
thanks to coverity... validate that the length of the packet on wire matches the size of the header based on the number of groups and sources. drop those that don't match. Change-Id: Iab3f3a835f6a43d9c73c5d502ea5ceccdd6985b0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion21-40/+40
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11memif: fix max number of ringsDamjan Marion2-4/+4
Change-Id: Ie7621a38a44e7c692e23e58c43d27d8d2aab43e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11avf: descriptor should be volatileDamjan Marion4-40/+60
Change-Id: I2cb4cf2167b6e958d2e57b461848a4a189e3fda0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11srv6-as: Adding rewrite countersFrancois Clad3-21/+72
Change-Id: I57f1db6fabfdb8ddfba514ad754707b24d47c962 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-07-11VPP-1338: fix coverity warning in mactime pluginDave Barach1-1/+3
Add missing VALIDATE_SW_IF_INDEX macro / check. Net of this fix, a spurious warning will probably recur. Coverity will complain that sw_if_index is tainted. Please dismiss the warning. Change-Id: Iec31ce1d86f742e197e63b0c5d474cd5e496ee5f Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-10IGMP: coverity found defectsNeale Ranns3-4/+10
Change-Id: Id6aba75c30712e9a0ac7b3075bd6cfc49d6bec36 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-10NAT44: multiple outside FIB tables (VPP-1314)Matus Fabian4-41/+178
Change-Id: I56eb15f8fd2d3049845287dc3df7870582764f8b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-07-10Remove unused variablesIgor Mikhailov (imichail)1-4/+0
Change-Id: If4da80c7eefe55905594eaaba0946d75f0892da5 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-07-10Do not translate packets destined for NAT64 inside interface (VPP-1331)Juraj Sloboda1-0/+29
Change-Id: Ieb8020f57ed5ad20daf552cd62ae3fdd8c573926 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-07-10pp2: increase recycle batch sizeBrian Brooks1-1/+3
Increase batch size when recycling buffers. This increases Mpps by 7%. Change-Id: I2a460611d9c36e9bf087b076fc4e187acf61108f Signed-off-by: Brian Brooks <brian.brooks@arm.com>
2018-07-10pp2: use configured RX queue sizeBrian Brooks1-1/+1
Change-Id: I5e5b2dd4f4bc3e257824015c723228ac5128d6a0 Signed-off-by: Brian Brooks <brian.brooks@arm.com>
2018-07-09IGMP improvementsNeale Ranns28-1736/+3770
- Enable/Disable an interface for IGMP - improve logging - refactor common code - no orphaned timers - IGMP state changes in main thread only - Large groups split over multiple state-change reports - SSM range configuration API. - more tests Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-29memif: minor fixesDamjan Marion2-9/+9
Change-Id: Ib06d9ce0fad48b784fd47db13c7a2f353c845fca Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-29igmp: bugfix and minor improvementsJakub Grajciar5-76/+60
Change-Id: I8d284117a668dc55c06a6d68fe358a3d7e26c738 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-06-27acl: fix for loop initial declarationFlorin Coras1-1/+2
Change-Id: Ie899ccbaae4df7cce4ebbba47ed6c3cce5269bdb Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-06-27avf: binary API and configurable RX/TX queue sizeJakub Grajciar10-13/+580
Change-Id: Ibd3a8d28d8f1df2bc14c42e48498f6ac26081192 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-06-27gcc8 and Wstringop-truncationMarco Varlese1-1/+1
gcc8 introduced a new warning (Wstringop-truncation) which in our case is being treated as error. Disabling the warning globally might introduce bugs related to string truncation which are not desired by the developer (e.g. bug). Instead, this patch disables the warning only for those occurences which have been verified to be non-bugs but the desired behaviour as per developer will. Change-Id: I0f04ff6b4fad44061e80a65af633fd7e0148a0c5 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-06-27acl-plugin: tm: avoid hash calculation dependency on a memory store operationAndrew Yourtchenko1-1/+9
A small store into a middle of a larger structure that was subsequently loaded for calculating the bihash key was noticeably impacting the performance. Change-Id: If7f33e1b66e8b438ba7cc91abc0ca749850c6e45 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-06-27acl-plugin: tm: add tuplemerge algorithm for relaxing the hashtable masksAndrew Yourtchenko3-5/+625
Slightly refactored from the initial implementation of the TupleMerge [1] algorithm by Valerio Bruschi (valerio.bruschi@telecom-paristech.fr) [1] James Daly, Eric Torng "TupleMerge: Building Online Packet Classifiers by Omitting Bits", In Proc. IEEE ICCCN 2017, pp. 1-10 Also add startup parameters to turn on/off the algorithm ("use tuple merge 1/0"), and a startup parameter to be able to tweak the split threshold ("tuple merge split threshold N"), the default value of the split threshold is 39 as per paper, but some more tuning might be necessary to find the best value. This change, alongside with the optimizations which avoid extra lookups, significantly reduces the slowdown on the ClassBench generated ACLs, which are supposed to resemble realistic ACLs seen in use in the field. Change-Id: I9713e4673970e9a62d4d9e9718365293375fab7b Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-06-26dpdk: display rx/tx burst function name in "show hardware detail"Damjan Marion1-0/+20
Change-Id: I6fa4c6bf9c4e96ba4502a06907bdecc654ace665 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-26NAT44: fix nat44_ed_not_translate_output_feature (VPP-1329)Matus Fabian1-0/+5
Change-Id: Iddb0b848c53da03116524e203c7112c82b401ac5 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-06-26L3DSR fix ip checksum issue and add testHongjun Ni1-9/+12
Change-Id: Iedebbac71d3e694b915d6a126c80ecc3b5473a4a Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-06-26acl-plugin: tm: optimize multi-lookups and prepare to add tuplemergeAndrew Yourtchenko6-252/+456
- instantiate the per-use mask type entry for a given hash ACE this prepares to adding tuplemerge where the applied ACE may have a different mask type due to relaxing of the tuples - store the vector of the colliding rules for linear lookups rather than traversing the linked list. - store the lowest rule index for a given mask type inside the structure. This allows to skip looking up at the later mask types if we already matched an entry that is in front of the very first entry in the new candidate mask type, thus saving a worthless hash table lookup. - use a vector of mask type indices rather than bitmap, in the sorted order (by construction) of ascending lowest rule index - this allows to terminate the lookups early. - adapt the debug cli outputs accordingly to show the data - propagate the is_ip6 into the inner calls Change-Id: I7a67b271e66785c6eab738b632b432d5886a0a8a Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-06-25dpdk: Enhancement to call crypto start api at initializationSachin Saxena1-0/+4
- Some crypto devices rely on rte_cryptodev_start() API to be called by application to enable a pre-configured H/W Crypto device. - NXP dpaa2 is one of the example. Change-Id: I2ad8ca0060604fb4e0541161e91bdebc6642f4da Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
2018-06-25acl-plugin: remove the noisy debug outputAndrew Yourtchenko1-1/+1
Change-Id: I6a3cfcb24f5027ec0f2cd2ec21ea47a01fef331b Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-06-25MAP: Move MAP-E/T to a plugin.Ole Troan21-0/+9135
Only remaining traces of MAP in the src/vnet is now in buffer.h. Awaiting a new buffer opaque API (hint, hint). Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-23Tx feature node, for accounting purposesDave Barach3-136/+204
Switch to combined allow/drop counters Show matching ip4 neighbor address if known Add static-allow mactime entries for unknown mac addresses Add the "clear mactime" command Change-Id: Ib963981438dfb8a123df1b3c023bd5fcc27f888f Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-06-21VPP-1042: Fix the DPDK no-hugetbl flagsJessica Tallon1-5/+8
Change-Id: I7c611d3fa7fabe82294fc22a61d5a3927a2da39d Signed-off-by: Jessica Tallon <tsyesika@igalia.com>
2018-06-21configurable per-dispatch-cycle sleepDave Barach3-27/+0
Workaround for lack of driver interrupt support. Also quite handy for home gateway, laptop/vagrant, other use-cases not requiring maximum vectors/second for proper operation. Change-Id: Ifc4b98112450664beef67b89ab8a6940a3bf24b5 Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-21FastLinQ QL41000 Series PCI vendor and device idsIgor Mikhailov (imichail)1-0/+3
Change-Id: I23caebf602e3e6ff45fdec106a0da88f6de7a284 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-06-21Null terminate name stringDave Barach1-1/+1
Change-Id: If7bcc6ae3358b5e39bf76481ee58f4dbaa53d895 Signed-off-by: Dave Barach <dave@barachs.net>