Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: refactor
To reproduce functionality, use udp in combination with
TRANSPORT_CFG_F_CONNECTED transport flag set in connect and listen
parameters.
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id88470c38326f8168b9646b0de49a674e0f4266f
|
|
Properly close the stream sending side instead of resetting the entire
stream.
Change-Id: I2daca7e507daa7bf9cd6a27fa8828a9ea7d175f9
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: fix
- swipe away the vomit indent left last time.
- add tests for VNIs > 16bit
Change-Id: I2d1f591bfb9d7a18996c38969365a509168d4193
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I58fea0474e293d5e6a029e0dccd4a24b07b76a90
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ida9daefc20a161b36d6f36c56267123c7f2efc01
|
|
The code sets f->n_vectors = n_to_send, but it can bail out of the
loop if vlib_buffer_copy(...) returns 0.
Need to fix f->n_vectors in the error return path, or we enqueue some
number of 0xfefefefe buffer indices in a debug image or worse in a
production image.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2d886266006c6c1c2f9ef8e3b95eb46ac6c0b3df
|
|
vlib_buffer_copy(...) returns NULL if the system is temporarily out of
buffers.
This is NOT correct. Please don't be this person:
c0 = vlib_buffer_copy (vm, p0);
ci0 = vlib_get_buffer_index (vm, c0);
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ic25ef58965871ea5d2b40904df9506803f69e47e
|
|
Type: fix
the GBP unit tests would peridocially fail. The reason being that there
is dynamic state whose presence nneds to be created, tested and then
timeed out. The failures occurded when the timeout occured before the
state could be tested. the previous timeout was 2 seconds, this has been
doubled, as a result i saw no faliures running continuously for ~16
hours.
bumping the timer increasing the test run time from ~40 to ~53 seconds,
a small price to pay.
in test cases where the state is not timed out i bumped the timer to 60
seconds.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I11b0970570caa8eebf486fe8cd8e44a4b2b1fc36
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Id2d181385f109163d4c806eecda166c2087c4b92
|
|
Type: fix
Change-Id: I5bf8d6043a49985b9241df8ff24774892678b557
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Maintain a global session LRU allowing reuse of expired session instead
of relying on a scavenging mechanism to periodically walk sessions.
Whenever a new session is being allocated in slow path, also attempt to
free an expired session from global LRU list.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I9edde9ec138de67c9a4888e915b0490ec16415fa
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I1be559a98f74c28a9c83fe320c8ce02459793e66
|
|
Type: fix
Change-Id: I11440c855eb35d2a6095dfe135e4ab5090f11ff3
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
If session is expired, the packet which we just received might be a one,
which legitimely creates a new session, process it in slow path instead
to decide the outcome.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I45628f52d37ae9dee5e8aa58171ff0b86f91f5dd
|
|
Introduce new cli for setting liveness check period and max retries for
a peer to consider its partner dead.
ikev2 set liveness <period-in-seconds> <max-retires>
Type: improvement
Change-Id: Iadae1de245d34fe3ee85e09b570f9df8c401772b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
1. Add uSID function in VNET SRv6
2. Add test case for uSID
Type: feature
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I354fc687192ed713ceb81fccc9f7b69b6777f6f6
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4a3861e31ca42faf0b59f8f09393fb10413bf3af
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie7102355b95eefb233ec7d146e61819051a7bf07
|
|
Fix of the top 11 python issues flagged as BLOCKER.
Ticket: VPP-1856
Type: fix
Change-Id: Icf4691e62f4a69d6ee196b6d6e2ab52d961b5c76
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: Ia7b07b4ec9e5681946f3f5c01c230c1f814e2cf6
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Causes static analysis "vulnerability" warnings
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I272fa69251d70f62178e6dff0423c16f99937af1
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ieb8bb9c6deb92479fdd3e045778fe5ae4782d1ea
|
|
Type: improvement
- allow apps to request rescheduling of tx events via
SESSION_F_CUSTOM_TX flag
- limit max burst per session custom tx dispatch
In tls
- use the new infra to reschedule tx events
- use max burst bytes as upper limit to number of bytes to be encrypted
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I544a5a3337af7ebdff3406b776adf30cf96ebf3c
|
|
Along with related static analysis warnings...
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2c6949c7a2250b8f76a63508c7c210daecfe0f91
|
|
Type: improvement
Change-Id: I9dd850a1ce85b0adb5136233f176117e0ee38817
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I840d43e79b1f826380bd56485441510e45bdfc7f
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia14800710aca7c1bc315b6da3c69d623f79a5b63
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I8074db3623ee4b37ac70ce8ea0d1912b97e5c059
|
|
DPDK recently added a check in the virtio driver to make sure that
rxmode->mq_mode == ETH_MQ_RX_NONE. We were passing ETH_MQ_RX_RSS
and the device initialization was not accepted.
The reason for the change in DPDK was that there is no controls
(algorithm, redirection table, hash function). So they thought ETH_MQ_RX_NONE
was the best choice for the value of mq_mode.
Type: fix
Ticket: VPP-1853
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ifa0fc4206cedc56a851f94f6434a2a7500bbd419
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia477b8dba9266f47907967e363c11048e5cd95ab
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6aaaec20a2b6d4c6ddfbe659d9402acc1be2f7e2
|
|
An unknown proto packet can be processed as UDP with destination port
rewriting which breaks the original packet.
With this commit, stop processing unknown proto packets after
nat44_ed_out2in_unknown_proto() execution.
Type: fix
Change-Id: Iea93faf3c282f542d5ee7120c15e1027c1e4abc9
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Fix crash when peer tries to build INFO req before key exchange which
results using NULL key pointers for crypto operations.
Type: fix
Change-Id: I20aaf1ce769e4bfb45235047c2dd38307b4e0b59
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: I275bbca17c5a0263b3e017b48aa6ccd8f59bc7c3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
This can be used as alternative to udpc
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic3f7efe6728b25d4a8a0b61ddb36de66b4672c4f
|
|
- updates the quicly version to 0.1.0-vpp
- adds workaround for quicly_send()/assert_consistency() failure
Type: feature
Change-Id: I4c7e0ffc720ad9a685b89046a83646d59febd6cd
Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I09fa6c1b6917936351bd376b56c414ce24488095
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
This patch adds support for the DPDK iAVF PMD
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I7bb0f621774e4c55b9b7309462e6591ce1b88fb6
|
|
This reverts commit aad1ee149403994194cf37cef4530b042ba7df3a.
Reason for revert: Verify failure. Doesn't build.
Type: fix
Change-Id: I91b1b26ac43edde4853e4561a0083d0b3a06efee
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: If90d753f129312400c4c3669bb86289d0c3e0d99
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Wait transitory timeout seconds before moving internal state of TCP
session to CLOSED state per RFC 7857. This patch implements this
functionality for endpoint-dependent NAT.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I4491d831cd9edf63fae520a516cdbe590bac85db
|
|
This patch fixes 2 different crashes:
1) BN_bn2bin() returns bytes written, not actual key length. Use
BN_bn2binpad() instead which adds padding.
2) Initiator may receive multiple sa-init responses for the same ispi
which may result in crash. Remember first response and ignore any
subsequent ones.
Type: fix
Change-Id: Ia1eac9167e3100a6894c0563ee70bab04f6a5f4f
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
Change-Id: Ibc65d739583dc11735f993f4c7e7ee6d3c8f5b0a
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: I746b94f494d059d2db5f47638c9f4e6bc4eb4045
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If4dee6dba1ea942daa921d566b35cdecdda680ee
|
|
Change the CLI keyword from address to prefix in sr localsid command.
Type: feature
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Icc3072404a106ab40e829d2d291e5c179a4443a8
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I172d3d907f324d8cb21e73aa08ef66da029ed365
|
|
If buffer alloc fails, it may happend that rx queue will be stuck
as old code only refills if at least one packet is received.
Type: fix
Change-Id: I388c4f8a9fb2c208bdc222e31b443cbe6b94af82
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I021b1427362f4bdba1c0ebc9863c9143dd6b3cb7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Before this patch, packet was dropped in ip4-input,
but ip4-map-t node dropped response due to
'security check failed'
This patch checkes if hop_limit==1 and sets error
and next frame and sends icmp6 response correctly
Type: fix
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I85a6af58205b05754ef8c45a94817bb84f915c85
|