Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
With multi-txq in VPP, user should be able to create
more txqs than vpp threads. MEMIF_MAX_M2S_RING should
be defined to 256 instead of number of vpp threads.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I337c3a5ea691470815653ff2dbfa862bb324b240
|
|
Type: refactor
Change-Id: I26a2a410f8f4070d10696f796d5887842cad3916
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Just like commit 252647482b24bb3474e8f13bc86100718176832f
did for Wireguard interface keys, prevent stack smashing
the peer keys.
Integer math on 32 bytes of base64 data might yield 33 bytes
of data in some poorly formed user input of private key values.
Rather than smashing the stack (detected) and aborting, simply
allow for the possible yet irrelevant 33-rd byte of data.
Type: fix
Fixes: edca1325cf296bd0f5ff422fc12de2ce7a7bad88
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I9f77b3faaaa01d3123b356c958db60c87238db9c
|
|
- Add peer_index, table_id, and keep-alive.
- Fix some lingering cut-n-paste issues in the API file.
Type: improvement
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I6fc0729ba0268bbcda0248f680979c44e68b6b0c
|
|
Type: feature
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: If24a43b7f79e05092306562c192de03994dec550
|
|
When dNAT-ing to a VIP, it can happen
that the return session conflicts with
another forward session than the one
we own.
This patchs adds a rsession_flags
CNAT_SESSION_RETRY_SNAT that makes cnat_session_create
search for a free src port to use for the
resulting return session.
It also makes forward & return session
share their fate in the session scanner.
Type: fix
Change-Id: Id0edf59abf8e5bc0c0d8941ba289c4563c77dee0
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Calling vnet_hw_if_register_tx_queue should
be done with the worker barrier held, as
virtio-pre-input might be grabbing a queue
while a memif connect event is triggered.
Change-Id: Ie1272cdfd2477faf7a4e10f30778279872f04916
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Add missing translation of ICMP inner IP layer.
Change responsible test so that it actually tests something.
Type: fix
Fixes: 4881cb4c6f
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Id3a6f12a7308d81b1cdf9815f857221fab2f24d9
|
|
In order to support the requirement of RSS and packet steering of new
protocols, such as GTPU PDU-type and QFI, for 5G UPF, a generic pattern
is introduced in vnet flow. The generic flow pattern is based on DDP
(Dynamic Device Personalization) function and Parser Library module in
DPDK. Using generic flow pattern, we do not need to create new packet
and field type and offset in API parser for every new protocols. We can
create flows for any protocol immediately as long as supported by DDP.
The generic flow can be used to support 5G related protocols in
different scenarios.
The input of this generic pattern are two binary strings for spec and
mask. Spec is the binary presentation of the target packet type, and
mask is used to mark the target fields.
In this patch DPDK plugins is enabled for POC. Next step we will enable
generic flow in native IAVF, which is the main target.
Here is an example. If we want to create a flow for GTPU QFI,
spec is:
00000000000100000000000208004500003C00000000001100000101010102020202000
008680028000034FF001C00000000000000850100010045000014000000000000000001
01010102020202
mask is:
00000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000007F0000000000000000000000000000
00000000000000
A naming API POC is created via VAPI to help create the rule with
the target packet format similar to Scapy. It is based on a function
module called PacketForge. In this way, the user no need to create
binary string spec and mask by themselves.
Type: feature
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: Id3444f95c158bdcdfeeee19d795cd9ecbeeec07c
|
|
The index i was incremented in the wrong place, and the check on the
presence of a next buffer in the chain was actually done for the
next desc_status rather than the current one.
Type: fix
Signed-off-by: Mauro Sardara <msardara@cisco.com>
Change-Id: I74a64a34fea497900b7969cd96e1aeeb570a1bba
|
|
With DPDK plugin, VPP does the DMA page map in IOMMU, only when
DPDK supported ethernet devices are present. As a result, Mellanox NIC
and QAT combo doesn't work. As part of this fix, DPDK supported
crypto device check is added to do the DMA page map.
Type: fix
Signed-off-by: mgovind <govindarajan.mohandoss@arm.com>
Change-Id: I02de4588c5b021e0c9c62612137f28ed8784bea6
|
|
Fixes a minor issue that causes printing an error message when there is no error.
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I59f5c6af7c5aeae3e812b4cf0c75a47894bb8bbd
|
|
Type: improvement
This patch improves the per dpdk-input loop number of packets
received from the port. The change mimics how packets rx happened
before VPP 22.02/DPDK 21.11: instead of trying to rx huge number
of packets (256) in one go, rx more times with up to 32 packets
max each time.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I804dce6d9121ab21b02e53dd0328dc52ac49d80f
|
|
Thanks to Ben McKeegan <ben@netservers.co.uk> for the report.
Type: fix
Change-Id: I8170dda572c326b6b1823fd330dbd5e961fdad74
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Change-Id: Ieb7a595e40d801af5349c83b128fa92c7698a346
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Recent "dpdk: refactor device setup" have broken vlans programming for IXGBE_VF.
Type: fix
Signed-off-by: Dzmitry Sautsa <dzmitry.sautsa@nokia.com>
Change-Id: Idacda33a473f6b10dbe002d9926661a19d0f3f97
|
|
Type: refactor
Change-Id: Ifd533a095d979dc55bfbe5fac7e0b7510a4d900c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Currently, when an interface is brought down administratively, IPv4
routes that resolve through that interface remain in the FIB. However,
the kernel removes those routes but doesn't send any notifications about
that. Desynchronization between the kernel and VPP happens.
With this change, when a notification received from the kernel
indicating that an interface was brought down, in addition to bringing
the VPP interface down, walk the IPv4 FIB bound to that interface and
remove any entries that resolve through that interface and were added
with one of the linux-cp FIB sources.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I0cd14bb63c9e6616ae1c5739b17c3bf33b186bc2
|
|
Type: fix
Primarily fix an issue reported by Coverity in
lcp_nl_open_sync_socket() that close() could possibly be run with
negative fd. Also, add more checks and error logging there.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I9a88520d068392977a6eba0766451e5652fe512c
|
|
Type: improvement
Currently, read event signal is sent on every notification message
received and added in the queue.
With this change, signal read event only when all currently available
notification messages are received.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ib86d189311ce01f50167e4e97feb99df0292ad96
|
|
Type: improvement
Currently, while reading notifications, ENOBUFS error is ignored and
reading continues. This was done to minimize the number of notifications
that are lost due to reopening the socket.
Now that synchronization is implemented to recover from socket errors,
ignoring ENOBUFS and reading as much notifications as possible is not
actual. Before synchronization, all currently enqueued notification are
discarded in any case.
With this change, stop reading notifications if any error occurs.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I1184d9a3aa99df63ef59bc2a67be2b1e5e0e9329
|
|
Type: fix
if original packet was to the link local, then the
fib index in the buffer is that of the LL table, we can't use that
to foward the response if the new destination
is global, so reset to the fib index of the link.
In other case, the fib index we need has been written
to the buffer already.
Add a test for IPv6 ping in an MPLS-VPN where int inout interface is
not the the same VRF as the response should be sent.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I18a232d90ddd3ef051a52476c5d861c87060e76f
|
|
Type: improvement
When dump of neighbors is requested, the replies will also include
neighbor entries for IPv6 multicast addresses:
GigabitEthernet0/8/0 S ff02::16 33:33:00:00:00:16
GigabitEthernet0/8/0 S ff02::1:ff76:7135 33:33:ff:76:71:35
GigabitEthernet0/8/0 S ff02::2 33:33:00:00:00:02
Such entries are not reported in netlink notification messages and
VPP is unlikely to use these.
With this change, ignore neighbor entries when the IP address is a
multicast address.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic712aa4904f1d559f31fd89ff4541268e2340f84
|
|
Type: improvement
During synchronization, only the current actual set of entries is
loaded. If some entries are no longer present in the set being loaded
but present in VPP, they should be removed to fully syncronize.
With this change, add handlers for sync begin and end events. Begin
handlers will mark the entries as stale. End handlers will remove the
entries that are still marked as stale.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I4f7e872af3e1c9ffa6c63bcc3984ec76def1bb43
|
|
Type: improvement
Currently, if an error happens on the netlink notification socket, the
socket gets reopened. A portion of notification messages have been lost
because of this and will never arrive on the socket. VPP will be out of
sync with the kernel networking state.
With this change, synchronize VPP state and the kernel networking state
if there was an error polling or reading the notification socket.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I8cdff89b505cd227535a0acaadb6ee757204c45e
|
|
Type: improvement
For some message types, timestamps are checked on netlink message to
decide whether the message should be applied. For notification messages
timestamps are expected to be always available.
With this change, before accessing the timestamp, make sure the message
info object that carries it is not null. If it is null, pass the check.
This is to be ready to process dump replies that will not need the
timestamp check and will have the message info object set to null.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic7211c0d451d72f6a5248898b3a8f8e0bca8f7aa
|
|
Type: fix
Currently, a tap interface created to be a member of a linux-cp pair has
default link state (down) and default link speed (10Mb/s). Then the
plugin monitors the link state of the paired hardware interface and if
it changes, the new link state is reflected on the tap interface. And
when the new link state is "up", the link speed is also reflected on the
tap interface.
The problem is that this scheme implies that the hardware interface's
link state is "down" at the moment of the linux-cp pair creation and
then changes. But there are cases when the link state is already "up" at
that moment. If that is the case, the link speed on the tap interface
will remain the default one until the link comes down and then comes up.
With this fix, when a linux-cp pair is created, reflect current link
state of the hardware interface being paired on the created tap
interface.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I73664d753f4daaa6d439c9ca898fb7363d21c06d
|
|
Some possible side effects for multicast routes appears to be in
lcp_router_table_add_or_lock. so ff00/8 route will be processed
for ospf purposes the right way
Ignore IPv6 kernel routes
Skip adding auto routes into FIB
Type: fix
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I35f73d629a7fffca7f7d4547adc2549b72c2048f
|
|
Include the user_instance in wireguard interface details.
In addition to dumping all wireguard interface details,
also allow selective dumping of just one interface.
Type: improvement
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: Iaf1093c6ae3eb00a685f34b2e0171285b02fae2b
|
|
Useful for stress testing.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0b1701682494a9fbf7deac311b4afd3036c50b56
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If5eed7dac4951f0510a4b4b092f66f44d0d3cacd
|
|
Type: fix
Signed-off-by: Saravanan Murugesan <sarmurug@cisco.com>
Change-Id: I5f7f4b925b3d250c5b8616d1fb35edbde50a7a23
|
|
The app keeps on using the default app ns but each listen will be done
in the vrf configured.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0947e03188d55231b299916351115038e0b1f5da
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibe92497cc5446ac5c734f8fe5c63c0167204dd09
|
|
This fixes an issue caused by session layer reading expected part of
data (cert + key) before the client actually sends it.
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I6ddddb08f9576211b302e814d7c2b040383e5fb7
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I925618e426b325f4fafb9ed39a2d7c2d7c7b38f3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I37ff8099c6c8044881379b4cd47ca8843746c315
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie89326ed4e599231fc20de67c5dadbb428568bec
|
|
Type: fix
Fixed coverity-issue CID 248517.
Originally possible passing null pointer to one function and directly
dereferences it.
This patch fixes the issue by add a new condition to check this
pointer.
Change-Id: If506abaf08c9f003860b641971af291f68613c18
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
|
|
Type: fix
Fixes: 39e9428b90bc
When a VRRP advertisement is received by a worker thread, the worker
calls vl_api_rpc_call_main_thread() so the main thread will process the
packet and make adjustments to VR state if necessary.
The data being passed to the main thread included a pointer to the VRRP
header in the received packet buffer. Since the main thread processes
the RPC request asynchronously from the worker thread, it's possible for
the worker to drop the packet and for the buffer to be overwritten before
the main thread can process it.
Copy the fields which may be needed by the main thread into a struct
instead of passing a pointer to a packet buffer.
Change-Id: I4e899e967df5a54776b521825a80e9cce1a94f5f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Integer math on 32 bytes of base64 data might yield 33 bytes
of data in some poorly formed user input of private key values.
Rather than smashing the stack (detected) and aborting, simply
allow for the possible yet irrelevant 33-rd byte of data.
Type: fix
Fixes: edca1325cf296bd0f5ff422fc12de2ce7a7bad88
Change-Id: I42acfbf3e8fbb3d517e21c53d4f80459d4800e9d
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
otherwise the feature is enabled n times for n lcp-pairs and the packets go n times through the feature.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8e47e4a293d6e2711f54aa09e9545e5e07728026
|
|
Type: fix
Fixes: 6fdcc3d
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I820c505482801ff2ab8dac41a0016bb3a741a4ee
|
|
TCP/UDP packets which are dropped are not counted towards TCP/UDP
counters. Apply same behaviour to ICMP packets.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I487fa7135ac8e49431a621fac213638d2dab31c8
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I4ede67c901456d57e457c648d28153423d45fb41
|
|
Breakdown the distribution of uops delivered to the frontend.
Collerates directly with the source of the uops.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I93a57dbe56dfa0f378527844aa4e63f45a548e55
|
|
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I2fd12a5b30aacdbaecb9156b829bfc06dfea377f
|
|
This is required after distinguishing between max_frame_size and MTU
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Ie642bee4e30ca76903bb8be5eeb6914c2c09bf35
|
|
Type: fix
Fixed coverity-issue CID 248517.
Originally possibly passing null pointer to one function and
directly dereferences it.
This patch fixes the problem by add a new condition.
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I02fc6fb5d1cfd6138ea4ba2b1946fd8a7ef34d3b
|
|
If the user supplies an instance number when creating a wireguard
interface, it should be used in the device name. If no user-instance
is given, the device instnce (tunnel number) is used.
For example:
vpp# wireguard create instance 17 listen-port 23023 src 1.2.3.4
private-key MDEwMjAzMDQwNTA2MDcwODA5MTAxMTEyMTMxNDE1MTY=
wg17
Type: fix
Fixes: edca1325cf296bd0f5ff422fc12de2ce7a7bad88
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: Ibf51868bf7b4b9e8a3f85557d05667207873bc91
|