Age | Commit message (Collapse) | Author | Files | Lines |
|
Original set, start, stop, reset, show etc interface was somewhat cumbersome, we
can improve slightly by combining set and start.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I7b865b2c29d2ab32adbd24d7f8a580da6990bb76
|
|
Need to add msg_id_base to the index
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Id7ebf168502e8fd811d8f2f0c5538e69e23242fb
|
|
Show % time spent per graph node in power level 0, 1 and 2.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I678ee812fa993af39568e9f9dfbf2396fc13ad42
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I4a5d52d54aa2748008e896888bfeabb18a1088bb
|
|
The crypto op data offset passed into DPDK is relative to the mbuf
buffer address plus the mbuf data offset, therefore the mbuf data
offset needs to be set rather than left at whatever previous value it
was at, which is likely to be incorrect and result in the wrong
portion of the packet being encrypted/decrypted for GCM.
The fe->crypto_start_offset field is relative to the start of the vlib
buffer (as opposed to the current data pointer), so set the mbuf
data_off field to VLIB_BUFFER_PRE_DATA_SIZE when performing a GCM
crypto op enqueue to match the crypto_start_offset semantics. This
then matches the behaviour in the non-GCM case.
Type: fix
Change-Id: I0ac2a44139387158765a3e04cfcaa5ee6f11d395
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
|
|
Type: fix
Change-Id: I170f9d8c685f59b7ccf6f9ee7fdc1dcdf2a54fe1
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Change-Id: If35b40168414807e928cb3026633ae9d2fa703ed
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add branches, branches taken (a meteric for branchy code), and branch
misses.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: If92d4aaf9d0a6e3b99b8c19e6311cc08ca470590
|
|
Type: feature
Change-Id: Ibfc412200ef5932fa40423075967df6d9156f3ed
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Use actual thread index from hash table instead of doing calculation.
Calculated index might be different and could lead to crash.
Type: fix
Change-Id: Iede9a67fbe541cb44eccd0d6ddf4e2c51eb35423
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibbb72e77c751b7e775620cfb160b52ceff2da86b
|
|
Type: fix
Coverity scan issue fix.
Change-Id: I9036fade15fd381da9c1e6b575f250fdcb21f876
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Adding support for enable&disable calls
(dynamic plugin configuration).
API (nat66_plugin_enable_disable) and
CLI (nat66 plugin enable/nat66 plugin disable) with support for
outside_vrf id configuration.
Change-Id: I5637ff1621d6662adc3b7c6f7f8176d84a4b492b
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Use correct vlib_main() in various code parts. Fix tests.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ia379f3b686599532dedaafad2278c4097a3f03f3
|
|
CID #220403 ~ 220406
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ibb65f9f2b17b9a9d45c077933b033ca3a65ae42f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id3ad783a7b0321a8fa37b4e606c0c4551ca4edd4
|
|
Type: improvement
Change-Id: I1152e58d7bfcb3c4347147f87a834d45ad51cdfe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I8b273bc3bf16aa360f031f1b2692f766e5fc4613
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I73383eb15186021cd6527d112da8443a0082f129
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: If3da7d4338470912f37ff1794620418d928fb77f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Refactor make test code to be co-located with
the vpp plugin source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I09d55301665449b3f183191537749435f806fb15
|
|
This patch enables ip4, ip6, ip6-n-tuple, l2tpv3 esp ah flows in avf plugin
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I92c6d4217a6cce4085ee83e8beb4b037c8d7da5f
|
|
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I24fa52fee88dabad8f0b84446f796ee055819617
|
|
This patch adds the flow support to VPP avf_plugin.
Currently only IP4-N-TUPLE and GTPU flow are supported as
a reference. More flows will be added later.
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I563dbfacecd3eba31e8c3c7769142ea6adba54b6
|
|
Sending the bogus acl_add_replace message with count=~0 will result in
an overflow of "expected_len" field which is a u32, thus the message
will pass the validation when it should not.
Solution - make the expected_len a u64 to avoid overflow.
The bug was found while experimenting with libfuzzer as part of
https://gerrit.fd.io/r/c/vpp/+/31763
Type: fix
Change-Id: I4a866d48f2418148236f1b1d77c487b869c7c43d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Change-Id: I068bfeaf22b9e6cce967c27acdd46d4b8541bdf8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I17228bd35cc7aa0d207a16502bf1376c75675302
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: fix
Change-Id: I392d348b1a38affac8761b0614b117cd991958d7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This patch introduces a 'program flow' virtchannel event.
The parameter is_add is used to identify adding or deleting the rule from avf
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1f5545ddc23e4494a25afa36ff601607405a8c3d
|
|
Type: fix
Change-Id: I84d511c30eb5878a1867f5e9d2207a39d4f0926c
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Avoid erroneous double vnet_feature_next if routing buffer manually.
Type: fix
Change-Id: I3f56c12bf57f59a1e5ddad63a2565fa195934cf6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This module implement Python access to the VPP statistics segment. It
accesses the data structures directly in shared memory.
VPP uses optimistic locking, so data structures may change underneath
us while we are reading. Data is copied out and it's important to
spend as little time as possible "holding the lock".
Counters are stored in VPP as a two dimensional array.
Index by thread and index (typically sw_if_index).
Simple counters count only packets, Combined counters count packets
and octets.
Counters can be accessed in either dimension.
stat['/if/rx'] - returns 2D lists
stat['/if/rx'][0] - returns counters for all interfaces for thread 0
stat['/if/rx'][0][1] - returns counter for interface 1 on thread 0
stat['/if/rx'][0][1]['packets'] - returns the packet counter
for interface 1 on thread 0
stat['/if/rx'][:, 1] - returns the counters for interface 1 on all threads
stat['/if/rx'][:, 1].packets() - returns the packet counters for
interface 1 on all threads
stat['/if/rx'][:, 1].sum_packets() - returns the sum of packet counters for
interface 1 on all threads
stat['/if/rx-miss'][:, 1].sum() - returns the sum of packet counters for
interface 1 on all threads for simple counters
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1fe7f7c7d11378d06be8276db5e1900ecdb8f515
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I35b5ae5a58ab38cc4328f9f438938fab4fbd7942
|
|
Type: fix
1. added additional checks for pending data in
openssl_ctx_read_tls().
2. fixed read/write typo issues.
Signed-off-by: Sivaprasad Tummala <Sivaprasad.Tummala@intel.com>
Change-Id: Id018c62bb9e02bf0d5f9abf929b6030b965a5d61
|
|
VppTestCase now has vpp_worker_count property set to number of workers.
This can be overriden by child classes. Also overriden by
VPP_WORKER_CONFIG variable for legacy reasons.
Type: improvement
Change-Id: Ic328bacb9003ddf9e92815767653bd362aa7f086
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Signed-off-by: Drenfong Wong <drenfong.wang@intel.com>
Change-Id: Ia81aaa86fe071cbbed028cc85c5f3fa0f1940a0f
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
It is well known that for some NICs, masking
interrupts results in delaying desc writebacks,
which breaks poll mode. This fix introduces an
"int-unmaskable" dpdk device flag to identify such
devices (typically Intel FVL). For such devices,
interrupts are masked by a call to
file_update(...,UNIX_FILE_UPDATE_DELETE) instead
of rte_eth_dev_rx_intr_disable (...)
Change-Id: Ifbc701aebe8572319b7aae19382bd683a47fc3cf
Type: fix
Fixes: 19ff0c3699342b512c03362b3815df684a661f49
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Ensure that dpdk_cryptodev engine async handlers are registered for the set of algorithms supported by all cryptodevices in the system.
Type: improvement
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I8293d87c6f07e935a1a0637704f24918cd3e132a
|
|
Account for occasional instances with the misses rates between caches
are inconsistent.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Idfb8bb7543401405cfe04291ad201c28be030cc9
|
|
Add perfmon plugin support to output raw counter and timestamps, both
are useful for debug.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Ia5a73d1f05e3464c18991c2346f0ed8b7ef63099
|
|
Make code easier to read and debug.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ib52a4cdd3bcdcc475053aa32af3964c00859e1cd
|
|
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8e48bdcc4c311717e067bb0a4e0b409a2eb8e83d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
%U format, arguments out of order, etc.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I829a3e5808923f096369ccf6af6386060ee8b62f
|
|
Type: feature
Ticket: VPP-1901
Change-Id: I1ad222b54363fd35679d0132d458345a9a18362c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
This fixes cnat_feature node LB
- use siblings instead of direct next_nodes
- only do the lookup if we have NO_NAT
- fix behavior in v6
Type: fix
Change-Id: Ie80c9912946bf55c30eadeb51340f4aec9bb297e
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Change-Id: I6ababc99ecf559327a4370914580c98d32680175
Type: feature
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9e65c94a5a05047a5104e9361ea36eac77b40442
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: refactor
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ifb4a9c52fd2c5dd9f3f5cf41214aa1851f6d7acd
|
|
Change-Id: I20e48a5ac8068eccb8d998346d35227c4802bb68
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: feature
|