Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I47d021522cfc92cfb3877449333cbf31022c06f4
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Fixed NAT issues with dropping reverse packets in case NAT worked
in 'endpoint-dependent' mode and outside interface has FIB different
from 0 when the output-feature is set.
In this case, the out2in_ed dynamic hash key was not being created
correctly.
Change-Id: I6362967f4b09a375a4606eedaa8e264795b25453
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
|
|
Allocate physmem on the same numa
set link speed
cap vmxnet3 support version to 3 if the device supports higher version
Change-Id: Id47dd83b0da53e623fd6cf3ad010e58158b1ab15
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I2ef33c7c15b3eb1f55bbfd5cbdd230d6a4d58936
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that
happens, we display whatever that was in the stack variable for rss_hf which
is confusing.
The fix is to clear rss_hf prior to the call.
Before the fix
--------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
...
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other
After the fix
-------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
..
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: none
Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I7e59ae718d2722c49d42b22a0874e1645a191e89
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I1b327309586c9234a22cda011953a1940d31e1ba
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Given n equals to the maximum number of bytes to copy from src in the API,
or the rough estimate strlen of src, strncpy_s_inline should not copy more
than the number of bytes, computed by strlen(src), to dst if n is greater than
strlen(src). The number of bytes to copy is computed by strnlen(src,n), not n.
Change-Id: I088b46125d9776962750e121f1fbf441952efc2b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Iea64d246008b298edeeae338d781b79362f42046
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Remove the needless tests and checks which coverity complains about in
string_test.c
Change-Id: I971650cada77136f06528a65625ef99bd3d7e915
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ic56ee4ce83b282a5f0f5aed500721fe639b941b3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6031f3f9cfa048a901a8424d33d47679115c2eb3
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
PR in openssl community is almost done, and need to change some code in VPP
to align with the openssl interface.
Change-Id: Ic7da53e507b67b53958760d07738dd774b1c526d
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: Ib474e2af98d98d54c9fc4070fab56799555c0f31
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This reverts commit be16020c5034bc69df25a8ecd7081aec9898d93c.
The arm verify job actually failed but the result was overwritten by an x86 ubuntu retry.
Change-Id: Idcae7691fc575053563b8ff8bcad661c15891668
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
* u32/u64/uword mismatches
* pointer-to-int fixes
* printf formatting issues
* issues with incorrect "ULL" and related suffixes
* structure alignment and padding issues
Change-Id: I70b989007758755fe8211c074f651150680f60b4
Signed-off-by: David Johnson <davijoh3@cisco.com>
|
|
Change-Id: I99c0737dfeeec2db267773625ddc9b55324fd237
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: If2bbfbc52994f5de0879763e0b7a7864498debb6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9d8fcf930132e832941e5678a9278a029e104dc3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I76ba11441f0ab3d150cdd080919cda91eac60b01
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib573d45def80b4123d5623fda920e6cda1247638
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In addition to that, a bit of refactoring.
Change-Id: Iea1eabc2167bcdef185ec53bc09bae087c5398e6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I97c6475920b7f7028c2bb1117ff9e5f629a54b44
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Icd1e9638cdb288e94196391a2c85f2eaaf65387e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5440d80333190ebac46d22eac43183939805a24b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
fix a copy-paste bug, and a typo of function name
Change-Id: Ib408522d2bb6fde7a7492de6f5d5369b461d77c9
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
Change-Id: Id35089d6c73b35cd25fd01e07966a2c7e2ea367e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5511823f38ad56161b6a538f2d9e63459eded1eb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I94591d5b103280f8df157819d423fef7ee89d4c8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3896bf9d71dc300520c53dbe3c2fd8fcd1470881
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
1. multi-loop, and new style with vlib_buffer_enqueue_to_next
2. add error counter for AUTH-FAILURE
3. buffer trace changed. now it supports 'trace add dpdk-crypto-input 10'
just like the other input nodes
Actual measurement shows >10 clocks per packets are saved, under QAT
or openssl PMD case
Change-Id: I6ea34e4ae3b08c381219ff6bc8adda2d927fbfd5
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
Change-Id: I74782d3b9b71a071bb500c34866a017b8ee15767
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I25c86aea23dff19656449b23133db27b1f062ac0
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I0ee80c7bec59d3e9c69e92e6cf0af1a6864a4ec4
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
This reverts commit 57f170bdf9967e3f8ea6e937a70c7f86187f95a2.
Change-Id: I1cab5be8b04ac881b712e67fd72ed202657fedf4
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I41a82e21571d5c64d01af72cd88c3983afac26ed
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I28e8a99b980ad343a4209e673201791b91ceab4e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
CI passes without this.
Change-Id: Iba542211e7b7b0e43c87a293b63a320b511c3d40
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Iabc8bcddd1b30a3b14f3cfd13b3c0b77a63028d6
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I336919a1d3a9d1b404e375a30575cce5e5335137
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
This patch adds support for VMBus to the VPP infrastructure.
Since the only device that matters is the netvsc Poll Mode Driver
in DPDK, the infrastructure is much simpler than PCI.
Change-Id: Ie96c897ad9c426716c2398e4528688ce2217419b
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Change-Id: I89695c1ad47131ed830f35c677937ce12025a40d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I5419e06592b0402e911e132796368800321f355a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
In preparation for adding input feature MAP support, as opposed to
going via the FIB, add MAP's own LPM data structures.
Change-Id: Ie363f0961b0ac9dde2a0fb76cb0c58c904876974
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I8dc261e40b8398c5c8ab6bb69ecebbd0176055d9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change the definition of vl_api_mac_address_t to an aliased type.
Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I3c77cadaa7b677073af00407f368bd48d703fdac
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Built a tool to chew up https://download.01.org/perfmon/mapfile.csv,
and output a table in this format:
typedef struct {
u8 model;
u8 stepping;
u8 has_stepping;
char *filename;
} file_by_model_and_stepping_t;
static const file_by_model_and_stepping_t fms_table [] =
{
/* model, stepping, stepping valid, file */
{ 0x2E, 0x0, 0, "NehalemEX_core_V2.json" },
{ 0x1E, 0x0, 0, "NehalemEP_core_V2.json" },
<snip>
{ 0x55, 0x5, 1, "cascadelakex_core_v1.00.json" },
{ 0x55, 0x6, 1, "cascadelakex_core_v1.00.json" },
{ 0x55, 0x7, 1, "cascadelakex_core_v1.00.json" },
<snip>
Change-Id: Ie0e8a7e851799e9d060b966047745039c066ec7b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Add clear hardware interface counters callback for vmxnet3 device. We take a
snap shot of the statistics in the callback. For the show hardware command,
we display the delta between the current statistics and the last snapshot.
Change-Id: Ie1389d2141f519300f427fe6ff2fdf97fd9e9378
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I5f05f112e8002e8b57db5c7a215ca4778ab6f76a
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|