Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: docs
Change-Id: Ie7836543e52bee08d12c565fbb6238d3e82ea3ce
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This patch adds the IPSec ESP/AH type flow support
Have tested on E810 with Intel iAVF driver
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I6ab8e69f67c423cc4e33f3c363881a97cdb98c30
|
|
Type: improvement
Change-Id: I0893d7cd8b8ab9958f585ac564bd0638bc60e78a
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Return error instead of dividing by zero.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I9f6a942e87ab87e8f1921e744ec1add45884e74a
|
|
Prevent overflow if input network prefix is too small and crash on
packet #1 due to vector not being allocated/initialized.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I3494cc62ce889df48cc59cc9340b5dd70338c3a8
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I04952865b7e2b447763d0b67d120c3d933177646
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I747d78966a7296dcbae54d54b0c165d407c8863d
|
|
Type: fix
Ticket: VPP-1890
Change-Id: I9441d5afc38df7dabf6cccaead69dd32646d2a9e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Ticket: VPP-1905
Type: test
Change-Id: Ie66fbd8e37eb5e69bd61b701ed3449366bee8c84
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: refactor
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Icc55276c8a4c256049718610cb131a34dc8d0a80
|
|
This patch documents the DNS plugin, vlib packet tracing, vnet feature
arcs, and the vppinfra library.
Type: docs
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Idb16ec0593d428ce78fe8404374a823a56b4b420
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Id6ab7e2ca965e860ea3f96145a888e0f3ccf9778
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ia824d663c86d6a7c9bafe0206e9a93f93884739d
|
|
Type: fix
Ticket: VPP-1888
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9c2fb926a5e010658088a74051c8c3462ff61734
|
|
Prefer using source port form packet as outside port if possible.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I5c25f6a42386f38c9a6cc95bd7dda9f090b49817
|
|
Support separate local and remote TEIDs, with local (or RX) one used
for GTPU tunnel RX/decap and remote (or TX) one used encap/TX.
Updated current gtpu API to support seperate RX/TX TEIDs and added new
gtpu_tunnel_update_tteid API to allow changing TX-TEID of an existing
GTPU tunnel. The current tunnel field "teid" is used for RX-TEID and
a new field "tteid" is used for TX-TEID.
Type: improvement
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I549d79750a34bb965036da298c0ca894d15c2c20
|
|
Type: fix
Change-Id: Ib6f423e24f1a8d8439cd7e8893e4605e10984d48
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: If73b88b9478b9314df6d9163c3a13724d4253c80
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Anouncing DH group in esp transform proposals will enable PFS which is
not suppored now. This fixes issue during rekey when using strongswan as
responder.
Change-Id: Ib9f586113ae0ab9dc67e6ceadff43f8aac463820
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Fixes: a1018c166a468f7692ab621c743503914266f508
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I86592f73a60fd146d3764e474f975881e940c244
|
|
Derive reasonable values from max translations/max users.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I41a96ab63ab138b4160cd60bd6df24fc73791c86
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Iea1748e8e39d213fcb3f3b52379bd37a6dd6aa3d
|
|
Replace whitespread (mis)use of snat_session_key_t by proper function
arguments where applicable and inline functions to calculate hash keys
instead of using structs for that. Make all hash tables use same network
byte order port so that there is no longer a discrepancy between static
mappings using host byte order while in2out/out2in tables using network
byte order.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I80786d2f947c67824c101a13bb608f1fe1080f34
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I8fbc4baefecf512573126c5085ed7a6e2e360fbe
|
|
Type: fix
Change-Id: I0e87021b11009a955f5839bdb68af897145816c1
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: I3198461f3dfc13cd3cedf2b8611dc80bb6f959c8
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: I3defde103ab245404de42d2be7abcb2c43d49a60
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Ticket: VPP-1887
Type: fix
Change-Id: I341ac7b455926a106d736f4de6771aae655db82e
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ife437f959e29d3de88bd7ee77221ada86fb03e80
|
|
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1110e425859a4f1f07952c91b50f263cb7323836
|
|
Type: improvement
Change-Id: I99c2383dd0d30efd1837f3d10ff2e4cf3a784283
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Otherwise, the out2in path will discard return-path traffic with
probability 1.0.
Type: fix
Fixes: gerrit 23963 / f126e746fc01c75bc99329d10ce9127b26b23814
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I621ed99329c04ef358035747dde599c0016b58f5
|
|
Type: fix
Change-Id: I8890aa5cc3c576fc9fb68735549dfab721714310
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Also: permanently solve ordering issues with the vpp builtin vat
plugin loader, by explicitly loading vat plugins once we're sure that
all data plane plugins have registered their APIs / API message
handlers.
Fix compilation / link errors when the vpp builtin vat plugin loader
is disbled by cmake configuration.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id553c63ae860ebfc196c5ad4b55c19e08fec2c9e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Type: improvement
Change-Id: I5f89fc3d994bd85d2c5138069ea2c58661814228
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change in snat_ipfix_header_create() to use thread-specific
vlib_main_t *vm pointer to avoid problems with different threads
accessing the same vlib_main_t data structure. This avoids
assertion failure when vlib_time_now() is called with a vm
corresponding to a different thread.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I2096c1debb5688d3b97e5ed9a0ea78d94053d8b7
|
|
Add a new boolean to signal that the API infrastructure should performan any required
endian conversions for the API handler.
am->is_autoendian[mm->msg_id_base + VL_API_MAP_ADD_DOMAIN] = 1;
Similarly add new REPLY_ macros that perform endian conversion.
These changes do not change the on-the-wire encoding of the API messages, and therefore the API CRC is not changed.
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I7588f8ccb38b2d1e8d85ea17be99bac43f756267
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
Change-Id: I8d128598b4c872f19b64c779c19b5908ba2f2c08
|
|
Type: fix
Fixes: 487507f
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia9813ae09d14111dc8edac0fa6ab082e13ab6e2e
|
|
Instead of having to wrap dump/detail calls in control ping, send details messages in between a normal
reply / request pair. As expressed in the below service statement.
Example:
service {
rpc map_domains_gets returns map_domains_get_reply
stream map_domain_details;
};
define map_domains_get
{
u32 client_index;
u32 context;
u32 cursor;
};
define map_domains_get_reply
{
u32 context;
i32 retval;
u32 cursor;
};
To avoid blocking the main thread for too long, the replies are now sent in client message queue size
chunks. The reply message returns VNET_API_ERROR_EAGAIN when there is more to read.
The API handler must also include a "cursor" that is used to the next call to the get function.
API handler example:
REPLY_AND_DETAILS_MACRO (VL_API_MAP_DOMAINS_GET_REPLY, mm->domains,
({
send_domain_details (cursor, rp, mp->context);
}));
The macro starts from cursor and iterates through the pool
until vl_api_process_may_suspend() returns true or the iteration
reaches the end of the list.
Client Example:
cursor = 0
d = []
while True:
rv, details = map_domains_get(cursor=cursor)
d += details
if rv.retval == 0 or rv.retval != -165:
break
cursor = rv.cursor
or the convenience iterator:
for x in vpp.details_iter(vpp.api.map_domains_get):
pass
or
list(details_iter(map_domains_get))
Change-Id: Iad9f6b41b0ef886adb584c97708dd91cf552749e
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Change-Id: I51cbe5c76a88d7fa65fa24dc1528e4f991eba534
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: improvement
Change-Id: I5c944c3f82e0f278b64f28e09a74f24514c029f0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Support VIRTCHNL_VF_CAP_ADV_LINK_SPEED.
Type: improvement
Change-Id: Ie45c9d557d0369464cbb6881ee1259ef3807d7d5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix allocation of port per dslite session.
After each session is created per protocol,
when new one should be created with new port,
instead it's trying to create with the same port
and while(1) loop is executed forever and VPP does
not response
Type: fix
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Ic91b8b07253498ef9846ca60bcd4c4c76a5fac91
|
|
Type: fix
Change-Id: I7cb7e3716aee865b12235865009e39ed6ad16680
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Document update to reflect merged SRv6 functions of lookup and forwarding for inner IP packet encapsulated with outer IP and GTP-U headers.
Type: docs
Signed-off-by: Satoru Matsushima <satoru.matsushima@gmail.com>
Change-Id: I85c9ddf6bf9fa63f2b8b6e03eff3ecec1e7615ab
|
|
vppinfra source files MUST NOT #include <vlib/vlib.h>, <vnet/vnet.h>
or similar. Move mpcap_add_packet(...), mpcap_add_buffer(...) to a new
file: src/vnet/mpcap.h.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id517aef6fe49b618f853ce32940b91ba45a1e60d
|
|
Netvsc devices have the port type determined from their link speed.
The link speed between reboots of an Azure VM does not always end
up at the same value, so an interface that was FortyGigabitEthernet0
earlier may be FiftyGigabitEthernet0 now. That makes it difficult
to maintain a persistent store of configurations and apply those at
startup.
Change the port type to be VF so the name will always be generated
as VirtualFunctionEthernetX.
Type: improvement
Change-Id: I58cab852b87c0bcd9f73afe239803f38dab5c159
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: I7349840af48eec209532dab43a8ad0bd68993268
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|