Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
Adding a very simple test case just to confirm that setting fifo size
same as the current in-use size would result no space to enqueue, which
is zero-window in the TCP.
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: I6d60449386eaa270f801d2046cc7e546f843bf34
|
|
Type: improvement
type re-use.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ic2a2e6babf9ae66a1e53aec53a6cd157e1893dc8
|
|
Type: improvement
Change-Id: I7f28a3f03ab1ea8461c52743c61dc23a57965237
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Direct Verb allows for direct access to NIC HW rx/tx rings. This patch
introduce TX direct verb support for Mellanox ConnectX-4/5 adapters.
'dv' mode must be explicitely selected at interface creation to benefit
from this.
Type: feature
Change-Id: If830ba9f33db73299acdbddc68b5c09eaf6add98
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I3f287ab536a482c366ad7df47e1c04e640992ebc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I7a952fd95e49468a0d1c763b3e289648c93539da
|
|
ICMP error messages are translated to ICMPv6 error messages with
erroneous destination address in the outer IPv6 header because sender
port is used instead of receiver port.
Both source and destination addresses in the inner IPv6 header are
translated erroneously because source and destination addresses of the
inner IPv4 header are getting zeroed during the translation.
With this commit, use receiver port for translation and save addresses
of the inner IPv4 header before translation of the inner header.
Type: fix
Change-Id: I1e93d54c1bbc154b401adcbb0fb661299655d01a
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I5ec761bfcdc13a8238b83ff46c2f1c53ec0e79d8
|
|
Type: refactor
Change-Id: I761fc764e6771dc95eb64614479c27fd44016690
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
This fixes a bug in the initialization of handoff_out2in_index and
handoff_in2out_index where the node index for out2in was set to the
in2out node, and vice versa.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I983ddd3b3cec06f4cb3fb95b2a9cda4ab6d1270f
|
|
Fixes 4 coverity issues
Type: fix
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
Change-Id: Ib3ef1df3e5d601d7751445ae1c9603bb6ce0f80c
|
|
Patch changes the behavior of session scavenging and fixes multiple
nat issues. Allows proper session clearing and removes issue with lingering sessions
in session db. Patch also updates and fixes CLI/API calls for better readability
of session state metrics. Fixes security issue that would allow attacker to
reuse timed out session in both directions (in2out/out2in).
Type: improvement
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: I78897585a2a57291fad5db6d457941aa0a0457bd
|
|
Type: fix
fetch the sa_index from the correct location
Change-Id: I351035ee0226c47585995ff9122320fd5c73ec53
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Add a clib_time_t * argument to clib_timebase_init(...), to encourage
client code to share the vlib_main_t's clib_time_t object.
Display the current day / date in GMT via the "show time" debug CLI.
Fix the test framework so it processes the new "show time" output format.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I5e52d57eb164b7cdb6355362d520df6928491711
|
|
DPDK provides two new APIs to retrieve information about the Tx/Rx
packet burst mode:
rte_eth_tx_burst_mode_get
rte_eth_rx_burst_mode_get
This patch leverages these two APIs to describe the tx/rx mode.
Currently, Intel X710/E810 and Mellanox Mlx5 support the new APIs.
For NICs that don't support the new APIs, still use the original way
to print their tx/rx function name
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ibe47f5debe3b3f17f462fbf9834394e22845cc08
|
|
Type: fix
Fixes: 39e9428b90
VRRP unit tests fail sometimes for changes which have not touched any
code related to VRRP. There were some timing-related changes recently
which probably made the VRRP tests, which rely on a VR changing state
within a certain amount of time, start failing.
Set the VRRP tests to only run with the extended tests rather than
running by default. This is temporary so VRRP will not cause spurious
build failures while a proper solution is figured out.
Change-Id: I5826ea39b944dfb9b0ca4bdfa2ebbe86d269f935
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: I2c89accddf2307fa975b71e974d4091499f104ed
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Implements the uN behavior
Type: feature
Change-Id: Icb5efc560e09052cd183b468772cf7f799f81194
Signed-off-by: pcamaril <pcamaril@cisco.com>
|
|
Type: refactor
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: I81546423200cc7f8a06b527dac8ead191a9e0519
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I357eb72d478d8175ab9c7cf502d312ab3112213e
|
|
Type: refactor
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: Ic34729d58a4218046afacaffc765649beb056a24
|
|
Type: improvement
Change-Id: I6bad46403c07b211dfda7229aed1b5e19342865f
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: Id8fc6750e856862157917587234a6b7b03531b13
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ib752a3425c076eb53bc5255a48039cbb74b1fcce
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
type should be used to get ICMP type instead of code.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Iabf4ae38befde18309caff8efd9e1d956a2fde82
|
|
Add new flow type IP4_N_TUPLE_TAGGED and IP6_N_TUPLE_TAGGED
for vlan tag sensitive flows
The original IP4_N_TUPLE and IP6_N_TUPLE will not match VLAN anymore
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ie511e9a64126440fe81f29665a56ca060061662d
|
|
Type: improvement
This patch makes configuring integration algorithm optional. This is
useful when using AEAD cipher (in fact when using such
cipher, integ algo is ignored anyway).
Change-Id: I5891db5c0433afb85ae2d9084d45b89ec1133178
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Bypass node MUST NOT intercept a packet if destination IP doesn’t match
a local address. However IP address interpretation depends on the VRF,
hence bypass node must take that into account.
This patch also factors-out common VTEP management and checking code.
Type: improvement
Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com>
Change-Id: I5665d94882bbf45d15f8da140c7ada528ec7fa94
|
|
Type: improvement
Change-Id: If81847bc0c92d167ce03e1e94a2f8e18f8154af2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: Ib9921718ec88e6dc56a38e40a140f16f86ed2e44
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: Ie6f2c79e0a769f70eab079c75a500b9308dd51e6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I081dec2dc0c2bd0845dd4638b7b2f12806594112
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0895eb54a8c31bfa545d30287bb0783876483d21
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1fef115ffc2277ad6e0673b49be137147808891c
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I13c0e4771defaebccc976a6f6703493de29434dd
|
|
Type: fix
Change-Id: Idd679885f42de45429a1dcbf3b0af1037dc54d2b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type:fix
Change-Id: I01ac57f6186b20d8ab4070b7259a82a150f0ae9a
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
VIP prefix index becomes always 0 when adding a VIP which is already registered different port, causing LB config crash.
This change assigns the same VIP prefix index to the same VIP.
Ticket: https://jira.fd.io/browse/VPP-1834
Type: fix
Signed-off-by: Yasuhiro Nakamura <yanakamu@yahoo-corp.jp>
Change-Id: Ib63b3e58db9bd85714d68cd1292aadd0c8580da8
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1f981e909c45f1731ce4bdfa959b41d349e22ef1
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie3bc31fc3df662e087f7931de6c274eb3608a2d8
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5ca8aee973776e73f1376b6be538785398ba9b3d
|
|
Without this patch offset for TCP/UDP headers was not calculated
correctly if there is one or more IPv6 extension headers.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I04d6f5e42f8f072987192d6236085afbd74a4420
|
|
Updating the document of srv6-mobile plugin code.
This commit also fixes the following issues:
- Doxygen build structure
- No binary file included
Type: docs
Signed-off-by: Satoru Matsushima <satoru.matsushima@gmail.com>
Change-Id: I376386ef6fc9584ab945db7358e3c4a698471e9b
Signed-off-by: Satoru Matsushima <satoru.matsushima@gmail.com>
|
|
- Remove vl_api_from_api_string
to prevent use of not nul-terminated strings.
- Rename vl_api_from_api_to_vec -> vl_api_from_api_to_new_vec
to imply a new vector is created. NOT nul terminated.
- Add vl_api_from_api_to_new_c_string. Returns
nul terminated string in a new vector.
- Add vl_api_c_string_to_api_string. Convert nul terminated
string to vl_api_string_t
- Add vl_api_vec_to_api_string. Convert NON nul terminated
vector to vl_api_string_t
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Iadd59b612c0d960a34ad0dd07a9d17f56435c6ea
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id601cd241a2d124d3189057edab4299ffde7ee32
|
|
For chain buffer, need to traverse b->next_buffer to transmit all buffers
in the chain. Only set EOP at the last descriptor in the chain to signal
this is a chain descriptor.
Introduce slow path to handle ring wrap. This is needed because chain
buffer may consist of multiple pieces and it may span from near the end of
the ring to the beginning of the ring.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Id7c872f3e39e09f3566aa63f3cdba8f40736d508
|
|
coverity complains that the subject test may cause dst buffer overrun
problem and it is right. The problem is when __builtin_constant_p (n)
returns true, memcpy_s_inline skips all the errors checking and does the
copy blindly. Please see the code in memcpy_s_inline.
The fix is to skip the subject test when the aformentioned builtin function
returns true.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I50de91cc0c853a134b3bcf3b0cd8d45d7668b092
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4ee46a6c3c53c58199c275e20702f7fd11b60d9a
|
|
- Allowing application to register custom fifo-tuning-logic.
- Adding an example custom fifo-tuning-logic in hs_app/proxy.
Type: feature
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2aca14d1f23d5c3c9debb7f4c46aca3a15a8d1b9
|
|
1. segment manager would attempt to balance the usages across
the segments, when it allocate fifos
2. the memory presure level is determined per fifo-segment
3. updated unit test
4. updated cli output for segments
Type: feature
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: I2923f3e0a43dd919196a0cb2cd55e098fde6cf66
|