Age | Commit message (Collapse) | Author | Files | Lines |
|
This fixes an issue when initiator is expecting request with intitial
msgid being 0 but 1 is received instead which results in retransmission
(instead of normally processing the new request).
Type: fix
Change-Id: I60062276bd93de78128847c5b15f5d6cecf1df65
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Re-enable the test for 2-worker config test
Change-Id: Ie108c5d244c6704ffa152177ca77f6b6055fe38e
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Keep coverity happy by checking the return value of unformat calls.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Iccd0296da527d079f79cc7bd8b57af1b524299bd
|
|
Type: fix
If no host interface name is passed to the CLI command which creates
an interface pair, NULL gets passed to lcp_itf_pair_create() and a
seg fault occurs. Check whether a host interface name was provided
and fail gracefully if none was given.
Change-Id: I82886f4c2ee710e206c751c34a74399112e9062c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I30fde452fdeeb9877f3e3fecb0dd723f10f61019
|
|
Type: fix
Change-Id: Ia22b1189b82e885eb380f638ea6d05923a858f01
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2a55a2fe0c483359c3b42ebe93cd0e8e279131d1
|
|
Type: refactor
This patch refactors the offload flags in vlib_buffer_t.
There are two main reasons behind this refactoring.
First, offload flags are insufficient to represent outer
and inner headers offloads. Second, room for these flags
in first cacheline of vlib_buffer_t is also limited.
This patch introduces a generic offload flag in first
cacheline. And detailed offload flags in 2nd cacheline
of the structure for performance optimization.
Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Support setting the MTU for a peer on an interface. The minimum value of
the path and interface MTU is used at forwarding time.
the path MTU is specified for a given peer, by address and table-ID.
In the forwarding plane the MTU is enfored either:
1 - if the peer is attached, then the MTU is set on the peer's
adjacency
2 - if the peer is not attached, it is remote, then a DPO is added to
the peer's FIB entry to perform the necessary fragmentation.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
|
|
Ensure policer struct is cache aligned and fits in one cache line.
Give it a simpler name to reflect its job as the representation of
a policer.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: If1ae4931c818b86eee20306e503f4e5d6b84bd0d
|
|
Type: fix
Change-Id: I744cedb9c1b57945af5e83057e4759964fd2e104
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
When strongSwan rekeys it sends create child sa request first and then
delete request for the old child sa (or vice versa depending on
configuration) as opposed to sending just a single create child sa with
rekey notify message.
Type: fix
Change-Id: I1fa55a607ca623cd3a6d887436207153c6f6bbf6
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Also apply style edits as proprosed by checkstyle.
Ticket: VPP-1971
Type: fix
Change-Id: I4332a4e32220f3076b4a373da01cc0022cde32f5
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Don't expect save_rewrite_length to be set correctly on RX path.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ieee40d119213f617c3d836181e5879f084b74548
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
u32[0] is not enough unique for some platforms like azure
where several devices(not only network) can have almost
the same addresses and this can cause collisions.
Change hash to mhash type for vmbus devices with key
of whole 16 bytes of vmbus address.
Type: improvement
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Ic6c6a657ae29f45beddd0c69d8e785e702349460
|
|
If the multi-worker default VPP configuration is triggered by
setting VPP_WORKER_CONFIG="workers 2", some of the tests fail
for various reasons.
It's a substantial number, so this change marks all of the
testsets that have this issue, such that they can be addressed
later independently.
Type: test
Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I645bb0a31b333a6160c74987dddb3fb50ff154d8
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Add a helper CLI to exercise a policer pre-configured by the test
harness. The test harness will check the stats afterwards.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I913dda4a9f8179c1c6b3061a68164bf1e698a392
|
|
support
Type: feature
attmpet 2. this includes changes in ah_encrypt that don't use
uninitialised memory when doing tunnel mode fixups.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie3cb776f5c415c93b8a5ee22f22586fd0181110d
|
|
Avoid doing inter-thread reads without locks by doing a handoff before
destination address rewrite. Destination address is read from a session
which is possibly owned by a different thread. By splitting the work in
two parts with a handoff in the middle, we can do both in a thread safe
way.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I1c50d188393a610f5564fa230c75771a8065f273
|
|
Type: feature
Basic dtls transport protocol implementation that relies on openssl
wire protocol implementation. Retries/timeouts not yet supported.
To test using vcl test apps, first ensure all arp entries are properly
resolved and subsequently:
server: vcl_server -p dtls 1234
client: vcl_client -p dtls <server-ip> 1234 -U -N 2000000 -T 1460 -X
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I04b4516a8fe9ce85ba230bcdd891f33a900046ed
|
|
When IPsec async mode is enabled, packets don't pass through the tunnel
if ciphers other than AES GCM are used for child SAs. An error that
arises is "bad-hmac" in the "crypto-dispatch" node.
On the encryption stage, the VNET_CRYPTO_OP_FLAG_HMAC_CHECK flag is set
for the integrity crypto operation when it's not supposed to. It seems
that the flag remains from the previous operation.
With this change, zero flags of crypto operations in the SW scheduler
during operation filling.
Type: fix
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Iabac253474e95cb01f9ec0933f3c4860f8a5289c
|
|
Type: fix
Change-Id: I1f8245e8cccacb5bbb511aef39e31d0a76bba95f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibea7ec844d1d910e8a3235e11154b1ecea8302ac
|
|
If static-mapping-only is enabled, NAT pool cannot be configured, only
static mappings. There're two ways to add addresses to the NAT pool:
by address range, or by first found address from an interface.
NAT44_ADD_DEL_ADDRESS_RANGE already tests if dynamic mappings are
available but NAT44_ADD_DEL_INTERFACE_ADDR doesn't. If
static-mapping-only is enabled, adding addresses by range is rejected
but by interface not.
With this change, if static-mapping-only is enabled, do not allow to
add addresses to the NAT pool both ways.
Type: fix
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ifc055ea9a71a5e579388833a2990aef21bf7ed29
|
|
Including a general missing free in fromjson autogenerated code.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9ab2b0193135e2fb3d62d51b3c114df56969e341
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Change-Id: I456f9b14e6a4eb46c9c49f6e09acccae530e4ebc
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This reverts commit c7eaa711f3e25580687df0618e9ca80d3dc85e5f.
Reason for revert: The jenkins job named 'vpp-merge-master-ubuntu1804-x86_64' had 2 IPv6 AH tests fail after the change was merged. Those 2 tests also failed the next time that job ran after an unrelated change was merged.
Change-Id: I0e2c3ee895114029066c82624e79807af575b6c0
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
support
Type: feature
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6d4a9b187daa725d4b2cbb66e11616802d44d2d3
|
|
Allow to supply the external VPP worker config for tests which
do not specify the workers config explicitly, and use
the tags infra to flag those that need attention in this configuration.
This commit shows one example use of such a tag, there will be
a separate commit with the rest of the places needing it,
since that change is rather mechanical.
Thus, the assumption is that the test should by default be agnostic
of the VPP configuration, unless it explicitly specifies so.
Type: test
Change-Id: I3c0077e4e22a75cb9561fb98d3b783b93486b2be
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Currently ping stops on events like SOCKET_READ_EVENT,
which makes it hard to use over e.g. govpp as it aborts
immediately most of the time. With this patch, ping only
stops upon real CLI read / quit events.
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: Id7a8d0b0fdeb7bbc7b85240e398d27bd5199345b
|
|
Fix dependency issues where multi-arch file is using API generated file.
Type: improvement
Change-Id: I5d4af7a630529bc138c35841723e38938f36d963
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Ticket: VPP-1859
Signed-off-by: jan_cavojsky <Jan.Cavojsky@pantheon.tech>
Change-Id: Iaa5045001621ec99dc8579e8e989adf81dc60525
|
|
Avoid synchronizing producers and the consumer. Instead, only use mutex
or spinlock (if eventfds are configured) to synchronize producers.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie2aafbdc2e07fced5d5e46ee2df6b30a186faa2f
|
|
A NAT sub-plugin doing statically configured match/rewrite on IP4 input or output.
It's stateless (no connection tracking).
Currently it supports rewriting of SA, DA and TCP/UDP ports.
It should be simple to add new rewrites if required.
API:
pnat_binding_add, pnat_binding_del, pnat_bindings_get, pnat_interfaces_get
CLI:
set pnat translation interface <name> match <5-tuple> rewrite <5-tuple> {in|out} [del]
show pnat translations
show pnat interfaces
Trying a new C based unit testing scheme. Where the graph node is tested
in isolation. See pnat/pnat_test.c.
Also added new cmake targets to generate coverage directly.
E.g.:
make test_pnat-ccov-report
File '/vpp/sdnat/src/plugins/nat/pnat/pnat.c':
Name Regions Miss Cover Lines Miss Cover
------------------------------------------------------------------------------------
pnat_interface_by_sw_if_index 39 8 79.49% 13 0 100.00%
pnat_instructions_from_mask 9 0 100.00% 13 0 100.00%
pnat_binding_add 64 8 87.50% 31 2 93.55%
pnat_flow_lookup 4 4 0.00% 10 10 0.00%
pnat_binding_attach 104 75 27.88% 33 6 81.82%
pnat_binding_detach 30 5 83.33% 23 2 91.30%
pnat_binding_del 97 33 65.98% 17 3 82.35%
pnat.c:pnat_calc_key_from_5tuple 9 1 88.89% 14 1 92.86%
pnat.c:pnat_interface_check_mask 10 2 80.00% 11 2 81.82%
pnat.c:pnat_enable 5 0 100.00% 11 0 100.00%
pnat.c:pnat_enable_interface 107 26 75.70% 60 15 75.00%
pnat.c:pnat_disable_interface 91 30 67.03% 32 7 78.12%
pnat.c:pnat_disable 7 2 71.43% 13 7 46.15%
------------------------------------------------------------------------------------
TOTAL 576 194 66.32% 281 55 80.43%
File '/vpp/sdnat/src/plugins/nat/pnat/pnat_node.h':
Name Regions Miss Cover Lines Miss Cover
------------------------------------------------------------------------------------
pnat_test.c:pnat_node_inline 67 11 83.58% 115 1 99.13%
pnat_test.c:pnat_calc_key 9 2 77.78% 14 2 85.71%
pnat_test.c:pnat_rewrite_ip4 55 11 80.00% 60 12 80.00%
pnat_test.c:format_pnat_trace 1 1 0.00% 12 12 0.00%
pnat_node.c:pnat_node_inline 63 63 0.00% 115 115 0.00%
pnat_node.c:pnat_calc_key 9 9 0.00% 14 14 0.00%
pnat_node.c:pnat_rewrite_ip4 55 55 0.00% 60 60 0.00%
pnat_node.c:format_pnat_trace 5 5 0.00% 12 12 0.00%
------------------------------------------------------------------------------------
TOTAL 264 157 40.53% 402 228 43.28%
Type: feature
Change-Id: I9c897f833603054a8303e7369ebff6512517c9e0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Change-Id: Icd01491043e9fd1bb8f51f4f55e1252fd78512de
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Make number of worker handoff frame queue elements configurable as
a set nat frame-queue-nelts command. The default value is 64 which
is the same value that was previously hard-coded. The idea is that
allowing larger values can be useful in some cases, to avoid
congestion drops. Also add nat_set_fq_options API support and a
corresponding test case.
Type: improvement
Change-Id: I5c321eb2d7997f76fac2703d9c4a5b2516375db3
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
|
|
Test whether responder sends info requests using correct ip table
Type: test
Change-Id: I9e97576f9d80686961f92de3cbc3e6f8d6341587
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Ticket: VPP-1908
Change-Id: I1d86ea18fcb6174b86c449d5d9403fd0e5715318
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
In responder initialize msgid in requests to 1 as the previous value (0) was
causing retransmision on the initiator.
Change-Id: I8f5b84331ecac5943129f4c9a377076768fec455
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
Change-Id: Ide2901f5d2111a518b2c8212aa84468cef1d72ca
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Making code more simple and storing thread index along with session
index as a preparation step for fixing thread safety patches.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ib0c531e9f1f64b1f1ee912d4a83279200638e931
|
|
Type: improvement
the empty pool chekc is always required, so make it alwayd happen.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3879e752036a7dd49fff7e16dc6d9ea02563aa7a
|
|
Type: feature
please see FEATURE.yaml for details.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I04a45c15c0838906aa787e06660fa29f39f755fa
|
|
When the counter vectors are validated and they are already long enough
to fit the given index in memory, there is no need to increase the stats
segment epoch. In this case, the counter vectors do not change as a
result of the validation.
This optimization is necessary for the case when the configuration is
changed at multiple thousands per second rate. The counter vectors grow
at the beginning and their size stabilizes after a while. Without this
improvement, it can still take several seconds for a stats reader to
succeed.
Type: improvement
Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com>
Change-Id: I5a6c30255832716a1460018d0bd0f63031de102b
|
|
.api files
Type: feature
Make the auto-endian nature explicit, rather than hidden in the x_api.c
file.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ibe647117ceeaf6f99a38a96576a5a41a3cbb1615
|
|
Type: fix
Change-Id: I02e473440a8732ddfb1a13ad6552779adaa67f60
Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com>
|
|
Type: docs
Change-Id: Ia541839e1f1ceddfae4579dece43b9cc820702e2
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit de569048a504cf211d80b86882e6781684301790)
|
|
Type: improvement
1) stack the interpose on any path-extensions (e.g. labels) from the
next best source
2) allow more than 1 source to contribute a DPO for a given prefix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Idc2fbb36cfbd2387081765d8af0f1fbe61612160
|
|
Type: fix
When a translation gets deleted, hiting a
session pointing to it sefaults. We're better
off directly storing the next node index.
Change-Id: I4f0716d775202b4ecf54d6cdb827bbeebd23056c
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|