aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins
AgeCommit message (Collapse)AuthorFilesLines
2018-03-15tls: add openssl engineFlorin Coras4-28/+823
Change-Id: I6c215858d2c9c620787632b570950b15274c0df2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-14vlib: internal buffer manager reworkDamjan Marion1-30/+18
- buffer_main is no longer part of vlib_main_t - pool of free lists is still part of vlib_main_t - mheap is not used anymore for buffer allocation - simple bitmap bassed buffer alloc scheme is introduced Change-Id: I3e1e6d00e2c8122293ed0a741245eb841315a1ff Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-14Prevent calling rte_eth_xstats_get not initialized devSzymon Sliwa1-0/+2
DPDK API forbids calling rte_eth_xstats_get on a port which has not been setup up yet. Citing the DPDK docs (reformated): " The functions exported by the application Ethernet API to setup a device designated by its port identifier must be invoked in the following order: rte_eth_dev_configure() rte_eth_tx_queue_setup() rte_eth_rx_queue_setup() rte_eth_dev_start() Then, the network application can invoke, in any order, the functions exported by the Ethernet API to get the MAC address of a given device, to get the speed and the status of a device physical link, to receive/transmit [burst of] packets, and so on. " original can be found here: http://dpdk.org/doc/api/rte__ethdev_8h.html#a36ba70a5a6fce2c2c1f774828ba78f8d Change-Id: I91854b8b0dd12dd028b4b36665cca49f16eac24c Signed-off-by: Szymon Sliwa <szs@semihalf.com>
2018-03-14IPIP: Add IP{v4,v6} over IP{v4,v6} configured tunnel support.Ole Troan8-1182/+0
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-14srv6-plugins: fixing documentationFrancois Clad3-201/+247
Change-Id: I72439df585e56b3cbb7051f056fc35cddf0c864b Signed-off-by: Francois Clad <fclad@cisco.com>
2018-03-12NAT44: fix nat_not_translate_output_feature in dual loop (VPP-1194)Matus Fabian1-2/+2
Change-Id: Icb858414145db0e5fef495e155903b3b935e50ba Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-12NAT44: fix nat_not_translate_output_feature for ICMP (VPP-1191)Matus Fabian1-8/+7
Change-Id: I1552e1418b704fdf1f1fa2c0174313b9b82a37a3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-11dpdk-input node packet trace intermittent on IP forwading pathJohn Lo1-36/+37
Packet trace initiated by dpdk-input node would occasionally not fully function if next node is ip4-input. Change packet trace saving order in the quad-loop so "sho trace" will display trace in packet receive order. Fold calling of vlib_trace_buffer() into dpdk_add_trace(). Change-Id: I9d7a9bf3b9391f95590e66150b26b0b15912d803 Signed-off-by: John Lo <loj@cisco.com>
2018-03-10Move the vnet cdp protocol implementation to a pluginDave Barach13-0/+2112
Add a binary API and debug cli to enable/disable cdp. cdp is disabled by default. Change-Id: I307c7e38dfda38e36ff3325f65de7036c34d89b1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-09Coordinate known Ethernet speeds with Linux kernel and DPDKLee Roberts3-0/+43
Linux kernel and DPDK recognize the following Ethernet speeds: 10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G. Add consistent Ethernet speeds to VPP. Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-03-09dpdk: move DPDK vfio hack to dpdk pluginDamjan Marion1-2/+67
Change-Id: I806cbf8c6c49643fe6c317bcceab93c1b9d441ab Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-09when exceed max reass,ahdj0071-6/+12
frag packet can't get reass. adding bihash,it can rewrite new hash value. so need to delete hash after compare hash value. Change-Id: I83b5c47890110e9a598b78cfbe8fcd27bbe291bb Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
2018-03-09ACL: Fix the detail for ethertype whitelistMohsin Kazmi2-3/+3
Change-Id: Ie8b4effbd25e1e26b625d451ec059bac58a5a5a1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-03-08tls: make tls engines pluggableFlorin Coras3-0/+573
- add infra for pluggable tls "engines" - makes mbedtls specific code a plugin Change-Id: I2c5b099e2b69d2be0038e3ef02b208ff907727e7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-08acl-plugin: add the support for dumping the ethertype whitelist (VPP-1163)Andrew Yourtchenko3-1/+180
The gerrit 10434 which added the support for whitelist model on ethertypes, did not include the support to dump the current state. This patch fills that gap. Change-Id: I3222078ccb1839dc366140fa5f6b8999b2926fd2 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-07NAT44: allow to configure one interface only as output or input feature ↵Matus Fabian1-0/+12
(VPP-1192) following is not possible: set interface nat44 out GigabitEthernet0/3/0 output-feature set interface nat44 out GigabitEthernet0/3/0 Change-Id: I1592cc18390881fda66f98316700886b8f5295f0 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-07GBP: fix the runs before statement against the ACL nodeNeale Ranns1-2/+2
Change-Id: I0ff13962ab6855663b9aec31c95e4a88cc809ff0 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-06LB plugin: Fix Layer-4 checksum error in L3DSR.Yusuke Tatsumi1-0/+5
Though dst-IP address would be change in LB plugin with L3DSR method, layer-4 checksum would not be recomputed after this change. Related changes: - L3DSR: https://gerrit.fd.io/r/#/c/10203/ Change-Id: I98de7b8d80186ac77608a68050208c08d90b7c3b Signed-off-by: Yusuke Tatsumi <ytatsumi@yahoo-corp.jp>
2018-03-06when lb tcp in2out flow,ahdj0071-0/+1
in2out and out2in protocol are not same Change-Id: I4ce680ad1f088cb079e1f2aeb15ca59225fca0d1 Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
2018-03-06reass frag_n should to be inited to 0ahdj0071-0/+1
Change-Id: I8a4a7a85e86acbfe411e6dfa22e3976d7d4c903b Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
2018-03-05Set DPDK_MLX4_PMD and DPDK_MLX5_PMD compile with default dlopen linksAmir Zeidner1-3/+0
dlopen linkage allow more transparent use for Mellanox nics. Mellanox shared library librte_pmd_mlx5/4_glue.so* placed in LD_LIBRARY_PATH At run time Mellanox code will be loaded only when Mellanox nics explicty used. i.e if VPP is used with other vendor Mellanox code is not loaded. Change-Id: Ib05bdbfc4cbb6e447c67186c98361f9c5b447140 Signed-off-by: Amir Zeidner <amirzei@mellanox.com>
2018-03-05vlib: vfio code reworkDamjan Marion1-1/+3
Change-Id: I99cf3e7cc991aa7d32385a155c707a6516516117 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-05NAT44 - unknown protocols work with forwardingMatthew Smith1-6/+9
If forwarding is enabled, inbound packets on an outside interface should not be dropped and instead pass on to the FIB lookup. This works for TCP and UDP but not other IP protocols. Enable it for unknown protocols. Change-Id: I1da84b5633a36b3e5e64079754db2fcc50f29819 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-03-04vlib: map pci region by using vfio FD when vfio is usedDamjan Marion1-1/+1
Change-Id: Ib94e9e9e9fcdad9cdb0e3402b3de7d78bd644abe Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-02NAT44: interface output feature and service host direct access (VPP-1176)Matus Fabian2-6/+117
forwarding mode: session initiaded from service host - translate session initiaded from remote host - do not translate Change-Id: I48170ee8e4ad14d3d3083ee31a40ef8d10d6ff32 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-016RD: Rewritten 6RD RFC5969 support.Ole Troan10-721/+904
Change-Id: Ic30fbcb2630f39e45345d7215babf5d7ed4b33a0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-01STN: Fix stn_rules_dump/details to follow API conventionOle Troan3-8/+8
Change-Id: I94f6c35bf751d25ca7fe7c67054e676a3ad2241b Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-27memif: Fix a message initialization problem in VATJon Loeliger1-3/+2
The VAT calls to MEMIF_SOCKET_FILENAME_ADD_DEL erroneously cleared the message memory after the M() macro call and thus lost their message id. Don't do that. While in the neighborhood, prevent a string copy from referencing data that doesn't belong to the filename string. Change-Id: Ib4309608ed617ef4f193880ecf4a0b35fda65e51 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-02-26vnet: add 25G interface speed flagDamjan Marion1-0/+6
Change-Id: I1d3ede2b043e1fd4abc54f540bb1d3ac9863016e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-25Fix bug in dpdk_crypto_session_disposal()Matthew Smith1-0/+2
The expression to determine whether to delete a session from the disposal list only evaluates true if some, but not all, of the sessions in the list were freed. When all sessions in the list are freed, it evaluates false and the sessions are left in the list to be freed again later, which can result in a session pool element that was reallocated to a different SA being freed, breaking crypto for the newer SA. Add an 'else' that handles the case where all sessions were freed. Change-Id: I3ae54d5b3bfc3658bf406caa50646924baaae589 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-24Fix crypto session deletion crashMatthew Smith1-6/+9
When using a DPDK cryptodev with IPsec, deleting a session often results in a SEGV. A bad pointer is being passed to rte_cryptodev_sym_session_free(). Put the correct value on the crypto disposal list and add a check to determine whether the call to free the session is going to result in a crash before doing it. Change-Id: I8a6b0a594585ebcfa56b555ede7ef7d67e5e2b33 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-23Disable scatter-gather for ENAMatthew Smith1-0/+1
ENA doesn't support scatter-gather. The PMD started failing rte_eth_dev_rx_queue_config() in DPDK 18.02 if the flag to enable it is set. Turn the flag off in dpdk_lib_init(). Change-Id: Ifdd9f188c89b46efe82412c75fb935a92436da1c Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-19dpdk: Fix MTU calc for NICs that support mtu<9216Nitin Saxena1-34/+66
Problem: rte_eth_dev_set_mtu() returns with failure from ThunderX NICVF DPDK PMD driver which supports MTU less than ETHERNET_MAX_PACKET_BYTES. rte_eth_dev_set_mtu() being called twice from dpdk_lib_init(): one via dpdk_device_setup() and second in dpdk_lib_init() itself. Currently dpdk_lib_init() passes vnet_hardware_interface->max_packet_bytes as an argument to rte_eth_dev_set_mtu() without consulting dev_info.max_rx_pktlen. NICs like i4oe, ixgbe can support MTU much greater than 9216 hence its not a problem for those NICS. Fix: This patch calculates dpdk_device->port_conf.rxmode.max_rx_pkt_len, vnet_hardware_interface->max_packet_bytes and MTU by consulting dev_info.max_rx_pktlen. Change-Id: If04bbfae49ee971dac0063ff1835e4a9c3087865 Signed-off-by: Nitin Saxena <nitin.saxena@cavium.com>
2018-02-16memif: VPP-1172: Ensure memif_create reply contains sw_if_indexJon Loeliger1-1/+6
Change-Id: If5cd2e913770adac4e7320f54584da63012f925d Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-02-15dpdk: add support for DPDK 18.02, deprecate 17.08Damjan Marion4-24/+0
17.11 is still default. Change-Id: I524d232579db8a59c717c5d760398b6b7f811d03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-14VOM: build with plugins disabledNeale Ranns1-1/+1
Change-Id: I1384d16deb3fa38b988dd2fc98f436124e381536 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-14NAT44 out2in DHCP client next nodeMatthew Smith1-8/+24
Call vnet_feature_next() for DHCP replies instead of using default ip4-lookup. This allows DHCP replies to reach an outside interface if it's configured as a DHCP client. Change-Id: Icce1cd68b21256fcd6b1fad6792c06578b0e4e36 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-14NAT44: run NAT nodes after ACL (VPP-1160)Matus Fabian1-15/+15
NAT input features run after acl-plugin-in-ip4-fa NAT output features run after acl-plugin-out-ip4-fa Change-Id: I1e4487a0d6fdb99a90b8db640d9ad0e0eb7347a5 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-02-12dpdk:fix trace to follow feature arcEyal Bari3-87/+66
Change-Id: Icd2184dec16d30cdcc689ca37c834b5df2f0a1a3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-02-09acl-plugin: Stale classify table after deleting macip ACLSteve Shin1-0/+22
Classify table for output node should be cleaned up after deleting macip ACL. Change-Id: Ibbc46c8465bec02fe6fa6a8d33a1f06bcf28e9ad Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-02-09GBP pluginNeale Ranns8-0/+1366
Group Base Policy (GBP) defines: - endpoints: typically a VM or container that is connected to the virtual switch/router (i.e. to VPP) - endpoint-group: (EPG) a collection of endpoints - policy: rules determining which traffic can pass between EPGs a.k.a a 'contract' Here, policy is implemented via an ACL. EPG classification for transit packets is determined by: - source EPG: from the packet's input interface - destination EPG: from the packet's destination IP address. Change-Id: I7b983844826b5fc3d49e21353ebda9df9b224e25 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-09memif: fix crash caused by zero pkt len in memif and clear dirty cache while ↵Chun Li5-12/+102
interface reconnect. Change-Id: Ifc7eb2494a22c334d8899422545fca1a4bba4d05 Signed-off-by: Chun Li <chunl2@cisco.com>
2018-02-08add CLIB_HAVE_VEC128 with NEON intrinsics (VPP-1127)Gabriel Ganne1-1/+1
Enable CLIB_HAVE_VEC128 if both aarch64 and __ARM_NEON ie. armv8 only, not armv7 Add more neon compare intrinsics wrappers. I only add simple intrinsics wrappers. More complex ones can be added later as they are needed, with performance tests on the corresponding feature to back them up. Remove wrongly added 128bits definitions defined on both armv7 and armv8 without concern for NEON instructions presence. Notable correspondinf code activations: * MHEAP_FLAG_SMALL_OBJECT_CACHE in mheap.c * ip4 fib mtrie leaves access * enable ixge plugin compilation for aarch64 (conf still disables it by default) Change-Id: I99953823627bdff6f222d232c78aa7b655aaf77a Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2018-02-08acl-plugin: add whitelisted ethertype mode (VPP-1163)Andrew Yourtchenko5-5/+308
Currently, ACL plugin largely does not care about the ethertypes other than 0x0800 (IPv4) and 0x86dd (IPv6), the only exception being 0x0806 (ARP), which is dealt with by the MACIP ACLs. The other ethertypes in L2 mode are just let through. This adds a new API message acl_interface_set_etype_whitelist, which allows to flip the mode of a given interface into "ethertype whitelist mode": the caller of this message must supply the two lists (inbound and outbound) of the ethertypes that are to be permitted, the rest of the ethertypes are dropped. The whitelisting for a given interface and direction takes effect only when a policy ACL is also applied. This operates on the same classifier node as the one used for dispatching the policy ACL, thus, if one wishes for most of the reasonable IPv4 deployments to continue to operate within the whitelist mode, they must permit ARP ethertype (0x0806) The empty list for a given direction resets the processing to allow the unknown ethertypes. So, if one wants to just permit the IPv4 and IPv6 and nothing else, one can add their ethertypes to the whitelist. Add the "show acl-plugin interface" corresponding outputs about the whitelists, vat command, and unittests. Change-Id: I4659978c801f36d554b6615e56e424b77876662c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-08acl-plugin: VPP-1088: add support for egress filter in macip ACLsAndrew Yourtchenko2-16/+244
This is the second patch, using the new functionality from the change 10002 in order to implement the egress filtering on the MACIP ACLs. This adds an action "2" which means "add also egress filtering rules for this MACIP ACL. The reason for having the two choices is that the egress filtering really takes care of a fairly corner case scenario, and I am not convinced that always adding the performance cost of the egress lookup check is worth it. Also, of course, not breaking the existing implementations is a nice plus, too. Change-Id: I3d7883ed45b1cdf98d7303771bcc75951dff38f0 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-08acl-plugin: an elog-based tracing implementation for troubleshooting the ↵Andrew Yourtchenko4-32/+153
conn cleaner threads interactions This replaces some of the early-stage commented-out printf()s with an elog-based debug collector. It is aimed to be "better than nothing" initial implementation to be available in the field. It will be refined/updated based on use. This initial code is focused on the main/worker threads interactions, hence uses just the worker tracks. This code adds a developer debug CLI "set acl-plugin session table event-trace 1", which allows to gather the events pertaining to connection cleaning. The CLI is deliberately not part of the online help, as the express declaration that the semantics/trace levels, etc. are subject to change without notice. Change-Id: I3536309f737b73e50639cd5780822dcde667fc2c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-07acl-plugin: multicore: send the interrupts to thread0 tooAndrew Yourtchenko1-1/+1
The thread0 in some configurations can handle the traffic. Some of the previous fixes accomodated for that, but the interrupt sending for connection clearing was not adapted to that, resulting in a deadlock during clearing of all connections... Change-Id: I32b4c7bac09c91c22b796baab843bdaf41f7045c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-07classifier-based ACL: refactor + add output ACLAndrew Yourtchenko1-1/+1
For implementation of MACIP ACLs enhancement (VPP-1088), an outbound classifier-based ACL would be needed. There was an existing incomplete code for outbound ACLs, it looked almost exact copy of input ACLs, minus the various enhancements, trying to sync that code seemed error-prone and cumbersome to maintain in the longer run. This change refactors the input+output ACLs processing into a unified routine (thus any changes will have effect on both), and also adds the API to set the output interface ACL, with the same format and semantics as the existing input one (except working on output ACL of course). WARNING: IP outbound ACL in L3 mode clobbers the ip.* fields in the vnet_buffer_opaque_t, since the code is using l2_classify.* The net_buffer (p0)->ip.save_rewrite_length is rescued into l2_classify.pad.l2_len, and used to rewind the header in case of drop, so that ipX_drop prints something sensible. Change-Id: I62f814f1e3650e504474a3a5359edb8a0a8836ed Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion5-21/+12
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-06vlib: epoll on worker threadsDamjan Marion2-0/+11
This patch teaches worer threads to sleep and to be waken up by kernel if there is activity on file desctiptors assigned to that thread. It also adds counters to epoll file descriptors and new debug cli 'show unix file'. Change-Id: Iaf67869f4aa88ff5b0a08982e1c08474013107c4 Signed-off-by: Damjan Marion <damarion@cisco.com>