Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Change-Id: Ieb97f1526939bcd732c155d3a7535dca71971258
Signed-off-by: Monendra Singh Kushwaha <kmonendra@marvell.com>
|
|
This patch fixes SDP (System DPI Packet Interface Unit)
device link information.
Type: fix
Change-Id: I4563094601d9bb24132e4dc712cde14daa7f4364
Signed-off-by: Monendra Singh Kushwaha <kmonendra@marvell.com>
|
|
Type: fix
Change-Id: Ic3d3de4198310361de876a8224e4f7cd0b48b698
Signed-off-by: XiaomingJiang <jiangxiaoming@outlook.com>
|
|
Type: fix
Change-Id: I62ccd96ea3549205510ff53118eab1fa3613d009
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Signed-off-by: Monendra Singh Kushwaha <kmonendra@marvell.com>
Change-Id: I9ffa78122dcd6b98cad9902e43ba8432fcd572b1
|
|
Type: improvement
Change-Id: Ibb493f1d7713d0e10b8bd1d5ff17b89967b53b8a
Signed-off-by: Aritra Basu <aritrbas@cisco.com>
|
|
This plugin implements a PoC of UDP-based tunnel substrate whose aim is
to specifically provide higher MTU to the upper layers by chunking
the payload PDUs into smaller packets with full 5-tuple.
At the same time, if there are multiple small packets to
the same destination during the vector processing, they
are packed into "carrier" packets up to underlay MTU size.
It does assume a trustworthy underlying medium, thus for the
operation over Internet it requires the use of encryption layer
underneath.
Type: feature
Change-Id: I323958fa8de62584f6ed15643ea689568a9a62bc
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: improvement
Change-Id: I381541fb180d6d6ba42e4d231d22a73c5d33ef65
Signed-off-by: Aritra Basu <aritrbas@cisco.com>
|
|
Make sure that proxy server doesn't try to open connection to the
target multiple times. When client is uploading huge amount of data
it might happen that proxy_rx_callback is called again before
connection to the target is established.
Type: fix
Change-Id: I4d272d37bc545f6f8790a115c8d26bcf3ea84f22
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Reuse existing proxy_force_ack for active open tx callback. This makes
sure proxy session is tcp (as opposed to tls) and also makes sure the
ack is sent from the thread that owns the proxy session.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9692fa2c4feefd3db701f9449a35495cf7b3d9dc
|
|
Type: fix
Change-Id: Iea00a03dc94dfd6d1f0532e629d2f3b38cb26c07
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Type: improvement
Change-Id: Id7a16388a72fc5de5848f3fec7a6dbeb6188f913
Signed-off-by: Adrian Villin <avillin@cisco.com>
|
|
Also retires old marvell plugin.
Change-Id: Icedec11f5661909058fdfe8d5fc455306adafacd
Type: feature
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I4864dc2af808aa76ecbc9ade0e86e1a781e6b704
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I28b8e8ccbff6f97e669b0048011b187decbfc892
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
With this feature, session enable is now modified to have 3 modes of operation
session enable -- only enable session
session enable rt-backend sdl -- enable session with sdl
session enable rt-backend rule-table -- enable session with rule-table
session rule tables are now created on demand, upon adding first rule
to the rule table.
refactor session table to remove depenency from sesssion rules table. Now
session rules table APIs take srtg_handle and transport
proto instead of srt pointer.
Type: feature
Change-Id: Idde6a9b2f46b29bb931f9039636562575572aa14
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Now when lcp pair is created, tap instance is based on hw_id. But tap
interface with such instance can already exist. Introduce an offset and
auto-selection based on it.
Type: fix
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Change-Id: I9db39106b0b0d5bf95c445b03e5b7ff52f946dd2
|
|
Type: fix
The flowprobe-input-ip4 node must be run ahead of ip4-inacl in some scenarios
to ensure that it sees flows on receiving interfaces.
The same is presumably the case for flowprobe-input-ip6, but this hasn't been
tested/observed.
JIRA: VPP-2122
Change-Id: Idf3b14dd2bd829f9aa3b1a71ccdcdf015ccdb36a
Signed-off-by: Scott Hutton <schutton@cisco.com>
|
|
Previously, iavf_port_add_del_eth_addr was not using large enough buffer
and address sanitizer does not allow that.
Type: fix
Change-Id: Icd1491fb5651aed20685d15224e9c725347ef369
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: improvement
Change-Id: Icfdaed6b70b83668127656930afcb4ac3c63b234
Signed-off-by: Aritra Basu <aritrbas@cisco.com>
|
|
Type: improvement
Change-Id: I3459dba86eb7a784448633b69492d6d3f49db720
Signed-off-by: Dau Do <daudo@yahoo.com>
|
|
vnet flow enable is failing due to bogus bytes pointed by spec, mask
variables of roc_npc_flow_item structure. Using reference to local
variables defined in block scope is causing this. Moving the variable
declarations to function block scope fixes this issue.
Fixes: 064762e20
Type: fix
Signed-off-by: Sriram Vatala <svatala@marvell.com>
Change-Id: I3904199b5b2bd88cd02ada5604059ab6fd12eef7
|
|
Change-Id: Ibafa51f5fc98674d30e8758a0f9cc361c8b5c0fc
Type: refactor
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Type: fix
Change-Id: I23c55e6be08cc02332da9375d2eb19b74b79427c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
removed unused parameter offset
Type: improvement
Change-Id: I30cde713731555fb2eb305c303369c1ead4d3783
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
set http status according to whether app also sent the body
Type: improvement
Change-Id: Ia41603cc21b410ca6929ec3d3e7c4c6808305769
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Request line must only start with method name and server should
ignore at least one empty line (CRLF) received prior to the
request-line.
Type: fix
Change-Id: Ifebd992dc4c13df1a3fabfcdef9e7ee644150a21
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Type: refactor
This patch moves osi into a plugin, and also modifies
the init functions of llc and snap to preserve init
order dependency (llc_init --> osi_init --> snap_init).
While the initial intent was to move osi/llc/snap together
into a single plugin, there exists a dependency on llc
in vnet/ethernet, which would require further refactoring
and testing work.
Change-Id: Ic0eff030ee29c8d316c0e0fe13931451aa193527
Signed-off-by: Hadi Rayan Al-Sandid <halsandi@cisco.com>
|
|
Type: improvement
Change-Id: I492df92ef25f9c0cd57fc8980500b58bebaa94c6
Signed-off-by: Adrian Villin <avillin@cisco.com>
|
|
Type: improvement
Change-Id: I01a228618db72f8db4e439c6ad636defe79a695a
Signed-off-by: Tom Jones <thj@freebsd.org>
|
|
This patch adds capability to update max_rx_frame_size on octeon
port.
Initial MTU value is being set in the "oct_port_start", which is
invoked every time the Ethernet interface is brought up, thus
overwriting any MTU value set by VPP CLI.
Moved the MTU initialization to "oct_port_init" to address this.
Type: feature
Change-Id: I00d0d52bc7711062cde47b8fe52e6823bb718d08
Signed-off-by: Alok Mishra <almishra@marvell.com>
|
|
This patch enables tx checksum offload and sets correct l3/l4 offset.
Type: feature
Signed-off-by: Monendra Singh Kushwaha <kmonendra@marvell.com>
Change-Id: I666f4000cb51c4979567a52255377dbe15ffb202
|
|
This patch syncs mac address to cgx/rpm table at initialization,
which sets interface in unicast mode.
Type: fix
Change-Id: Icf64b91ce5c74cc399cad3d3358b951fb2a65297
Signed-off-by: Monendra Singh Kushwaha <kmonendra@marvell.com>
|
|
Type: improvement
Change-Id: I629add6e3f4219d56610c3785013f69dbe847844
Signed-off-by: Adrian Villin <avillin@cisco.com>
|
|
- https://www.rfc-editor.org/rfc/rfc9110.html#name-media-type
https://www.iana.org/assignments/media-types/media-types.xhtml
Type: improvement
Change-Id: I2624dc39a985ff3999aed6e1c833220b7049828d
Signed-off-by: Adrian Villin <avillin@cisco.com>
|
|
Use svm_fifo_peek in http_read_message and advance rx fifo head by
amount of bytes send to app, since not always you won't or can't
send all bytes.
Type: improvement
Change-Id: I84348c9df5c77ba386c9738a754295bb9ea0f7ef
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Type: improvement
Change-Id: Ifb90818a3526d3d4030a66b1ef7eebedfe97978f
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
current approach saves state in per-thread data structure. in
multi-worker + nat-t cases udp/500 and udp/4500 might be dispatched on
different workers. this patch adds hands off packet to 1 explicit thread
- 1st worker (or main thread in case there're no workers) or to thread
that was explicitly set by user via configuration
Type: improvement
Change-Id: Ib5cd9a4b8612dfaa63b276035709524f7a492d4f
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
|
|
the former code was re-allocating the vector when padding takes place.
it's not necessary since we have the correct size. also, it caused
issues since upper layer doesn't know about re-allocation and it caused
crash. with this patch many test-cases are enabled again.
Type: fix
Change-Id: Idf0b320101670ec64d62e9aac6399cc7c54c996f
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
|
|
Type: improvement
Change-Id: Iaa70abcee02866f9a6426a6e8e4709eeba0e8114
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Plugin code is incorporated in http_static plugin for longer time.
Type: refactor
Change-Id: Ib74adb2a79d3ee715bbc994d77bc7718faf7184f
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Replace clib_warnings() in the forwarding path with
error counters.
Change-Id: Ie679d940f056eeddeb8a032c77fe9c2195490cfc
Signed-off-by: Ole Troan <otroan@employees.org>
Type: fix
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Client app can sends request target, custom header and body to
HTTP layer. In response it receives all bytes as received from
transport, aditionally we provide offset and length of headers
and body.
In addtion client app is now able to receive response with all
status codes and Host header field is set in request at protocol
layer.
Type: improvement
Change-Id: I8c8e2c8f99cdf500126b7c2c722aebc254aa0d9f
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Type: fix
Change-Id: Ie4af8ec0c6089b5719899f3d0b670f8a2de7f8a2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Type: fix
Change-Id: I57814edb735e9dac916f2e01de95ccfb739ce655
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
When client sends second request without waiting for response of the
first request http_ts_rx_callback should drop request (pipelining is
not supported) instead of invoking return to state machine which can
lead to erroneous state, e.g. reading random data from server app
fifo.
Added simple http static server url handler for testing to simulate
long running request processing, for now hardcoded delay 5 seconds.
Type: fix
Change-Id: Ied9f7e2e4ee64c982f045c0f7f99a2dc5d7a2108
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Server app could return headers in front of body/data buffer.
Offers apis for building and serialization of headers section.
HTTP layer now only add Date, Server and Content-Lengths headers,
rest is up to app. Well known header names are predefined.
Type: improvement
Change-Id: If778bdfc9acf6b0d11a48f0a745a3a56c96c2436
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
add infra for memory leak testing
Type: test
Change-Id: I882e8dbb360597cdb82ad52682725f7d39b2df24
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
An issue is noticed when the link state of the ethernet interface is
toggled to down and again brought up. The link status shows "up" in the
"show interface", but shows "down" in "show hardware-interface".
This issue does not occur when the link is brought up for the first
time, but only manifests when the interface is brought down and up again.
This happens because the device status and VNET_HW_INTERFACE_FLAG_LINK_UP
aren't correctly updated during the port stop, preventing them from
being updated during the port start.
This patch fixes this issue in the port stop function.
Type: fix
Fixes: 01fe7ab88e
Signed-off-by: Alok Mishra <almishra@marvell.com>
Change-Id: Idbc5a6c31409a3d1c5b19e14a3c9509291175677
|
|
When a FIB entry has multiple sources installed by covering inheritance,
the first walk installs the covering source, which can be worse than the
already used one (hence the source is not activated). If a covering path
is added and a new fib cover walk is done, the deactivated source is
compared to itself. This operation calls for a reactivation of the source which was not activated in the first place.
Type: fix
Change-Id: I2639401bed14eb5a2cb003664c04d6c1f9130de9
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|