Age | Commit message (Collapse) | Author | Files | Lines |
|
When the slave interface is admin up after it is added to the bond group,
lacp does not send lacp pdu's to the interface because its periodic timer
is not running.
The issue was the slave interface's variables got reset after the state
machines were initialized.
Change-Id: I2942556ce29a4acc97db3be40293e69bed7b6679
Signed-off-by: Steven <sluong@cisco.com>
|
|
move un-necessary session based operation to listener
split orignal openssl ctx to be session based ctx and listen ctx
Change-Id: Id6c54f47b0e2171fd8924a45efcd5266ce5402d5
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
DPDK 18.08 verifies if all set bits are supported and fails if not....
Change-Id: Ia87242fcda11147dff3bebe2e2bef32f0a8891fb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6239e930a8805207f8e42d15e8b17d444047e3f3
Signed-off-by: shubing guo <guo.shubing@zte.com.cn>
|
|
- replies should not need to contain client_index since
it is used to identify sender of requests to VPP
Change-Id: Iece3853b3f020054ee1652b149d0cf8d9580db4e
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
|
|
Use rx_fib_index instead of sm->inside_fib_index for session lookup key.
Change-Id: I2d6cce5b9376fa8ac4d75a9bbfa8498be0fd1493
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
outside address and port
Change-Id: Ie5452350a8ebe2c1b62085fcab50dbc0138d3ae2
Signed-off-by: shubing guo <guo.shubing@zte.com.cn>
|
|
Should not enable nat44-hairpinning node in deterministic mode
Change-Id: I5790323a6842ee71a62c6c91c49166a2839eac12
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Add missing call of nat64_tcp_session_set_state to set TCP session state.
Change-Id: Ifd297ea3ffe20870e1e34a95449b5c9404ec13eb
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I0777a00f0cc082bab3348be8ec0be39faa50ffed
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
This significantly reduces need for
...
in multiarch code. Simply constructor macros will jost create static unused
entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by
compiler.
Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If1b93341c222160b9a08f127620c024620e55c37
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
-- The session should not be deleted when either ip address or port doesn't same with static mapping.
Change-Id: I09ab7379947654d2780a8c40c5340ce430541b12
Signed-off-by: shubing guo <guo.shubing@zte.com.cn>
|
|
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4e774dc53b08746cd4ab42393f33676dcc78e791
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
... rather than re-implementing the loop
Change-Id: I20bede8403c804cbec654db9b7020a4d01e5bc18
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Commit 1c7bf5d41737984907e8bad1dc832eb6cb1d6288 added the poisoning
of the newly freed memory in debug builds, exposing a logic
error in mask assignment code - it passed a pointer to
within a pool to a function which might potentially expand the pool.
This resulted in a failure of the test in the debug version.
Fix that by making a local copy of the value before passing
a pointer to it.
Change-Id: I73f3670672c3d86778aad0f944d052d0480cc593
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I756e3ad3de9ffe1494221ef95c1943c8591f8f50
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
dpdk raw item match string changed from flexible array member to a
pointer member
Change-Id: I930f05112ce04b0cdb3feb985d755e730b102084
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
plugin won't compile if VLIB_BUFFER_TRACE_TRAJECTORY is set. The
quad loop was OK, bug in single loop only.
Change-Id: I11262bf6a223680eeac7ed23238ceda425a02c1b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I2f376a777081da131110227e760ca0069438c918
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
This change avoids the long-read-after-short-write, resulting
in a small performance improvement.
Change-Id: Ic01d1fd19182e96100ccaf441d7ab5e5898b9734
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Add support for local backends in multiple VRFs for load-balancing NAT rules.
Change-Id: I64e6818bd67a7e69985003498cf1f16f7200c334
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ibd5cbbdfb22a235442cddaebc9eae9a3c4e35ec9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib596e7f525b83dc7e830bcf6a126cd210216ce86
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
create runtime dir when adding default socket filename.
Change-Id: Iad7e751fcab7ce773e0907302414a06ea44dd6cd
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: Ifc8b3d30d66c7ade1e3584844ce3f82d42d2fb94
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I09b8406168df4b6b28df3ede24ee839681be0195
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Reduce default queue size to twice the vlib frame size. This throttles
the PP from transferring more packets than are necessary for the next
round of graph execution on a core. When combined with DMA'ing into L3
cache, Mpps for 64B packets increases 35%.
Change-Id: I0afe426d23560f262fdc56accb6302b099bd0076
Signed-off-by: Brian Brooks <brian.brooks@arm.com>
|
|
Needed a spinlock to protect the data vector. Cleaned up debug cli so
the output makes sense, and so that various parameters exist in one
place. Removed a nonsense memset-to-zero which led to ultra-confusing
results.
Change-Id: I91cd14ce7fe84fd2eceab86e016b5ee001993be4
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I51cc4522df2dd6682148a13e7e1903850b4b3d08
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3a4529ff8dae70da99ec95c39ddf788c9498f478
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
- assign rx thread on interface create, not on admin up
- keep interrupts unmasked all the time as they are needed for writeback
- forward interrupt to graph dispatcher only if queue is in the interrupt mode
Change-Id: I5cc5afe24960143bef08f12d59fbd80ae0c6ccf8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
in case of relative path, create subdirs inside runtime dir.
in case of absolute path, if folder does not exist return error.
Change-Id: I01fe018102c69deb105160cfa18b741541d76c82
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
avf_create_reply returns software index for the new interface
Change-Id: I8a6b1a1985b072efafa24eb258b1f2cb1bea1110
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Move the tcp unit test to the plugin
Add a bihash unit test and a "make test" program to call it
Adjust framework.py to load the plugin, which is disabled by default
Change-Id: Ic229d386a56a9d28dbd54974f231149053ca8f93
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
One handler is good enough when engine sends out a retry status
Thus this patch will just go one branch
Change-Id: Id81cb3fa67d2b322b0fe1b2f62cd866cf3491eb4
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: I5009fcfde5c627d59dea3edda15486b9392134a2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
with ip direct broadcast enable a packet to the interface's
subnet broadcast address with be sent L2 broadcast on the
interface. dissabled, it will be dropped. it is disabled by
default, which preserves current behaviour
Change-Id: If154cb92e64834e97a541b32624354348a0eafb3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0fc19dd109e569f2c407a85e8fa32758e06676b8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iad7e0337a577ef8a0dfb7bde1968cc115d176043
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
DBGvpp# set interface rx-mode AVF0/4/2/0 interrupt
set interface rx-mode AVF0/4/2/0 interrupt
DBGvpp# sh int rx
sh int rx
Thread 0 (vpp_main):
node dpdk-input:
FortyGigabitEthernet6/0/0 queue 0 (polling)
node avf-input:
AVF0/4/2/0 queue 0 (interrupt)
DBGvpp# sh int addr
sh int addr
AVF0/4/2/0 (up):
L3 133.1.1.10/24
FortyGigabitEthernet6/0/0 (dn):
VirtualEthernet0/0/0 (up):
L3 192.168.42.1/24
DBGvpp# clear run
clear run
DBGvpp# clear interfaces
clear interfaces
DBGvpp# sh int rx
sh int rx
Thread 0 (vpp_main):
node dpdk-input:
FortyGigabitEthernet6/0/0 queue 0 (polling)
node avf-input:
AVF0/4/2/0 queue 0 (interrupt)
DBGvpp# ping 133.1.1.3 repeat 1
ping 133.1.1.3 repeat 1
64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.6237 ms
Statistics: 1 sent, 1 received, 0% packet loss
DBGvpp# sh int
sh int
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
AVF0/4/2/0 5 up 9000/0/0/0 rx packets 1
rx bytes 98
tx packets 1
tx bytes 98
drops 1
ip4 1
FortyGigabitEthernet6/0/0 1 down 9000/0/0/0
VirtualEthernet0/0/0 2 up 9000/0/0/0
local0 0 down 9000/0/0/0
DBGvpp# sh run
sh run
Time 41.9, average vectors/node 1.00, last 128 main loops 0.00 per node 0.00
vector rates in 2.3858e-2, out 2.3858e-2, drop 2.3858e-2, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
AVF0/4/2/0-output active 1 1 0 1.24e4 1.00
AVF0/4/2/0-tx active 1 1 0 4.28e4 1.00
api-rx-from-ring any wait 0 0 2 6.94e4 0.00
avf-input interrupt wa 1 1 0 1.09e4 1.00
avf-process any wait 0 0 47 1.01e4 0.00
...
DBGvpp#
DBGvpp# set interface rx-mode AVF0/4/2/0 polling
set interface rx-mode AVF0/4/2/0 polling
DBGvpp# sh int rx
sh int rx
Thread 0 (vpp_main):
node dpdk-input:
FortyGigabitEthernet6/0/0 queue 0 (polling)
node avf-input:
AVF0/4/2/0 queue 0 (polling)
DBGvpp# ping 133.1.1.3 repeat 1
ping 133.1.1.3 repeat 1
64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.2038 ms
Statistics: 1 sent, 1 received, 0% packet loss
DBGvpp#
Change-Id: Ib7d2b505ae4bb74a052263af766ca37d9df7bfe4
Signed-off-by: Steven <sluong@cisco.com>
|
|
Fix a typo from previous patch. Change 0x104 to 0x1004.
Change-Id: I82230a8a0ec01567eb1d4bc12ac02062c2a98347
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Thus when engine buffer is full during a burst in performance
tesing, this code will help VPP handle retry machansim.
Change-Id: I0f9fc05d3dba8a54d34dca4c6137700d6c80f714
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
The length field is included in the checksum. Therefor, we need
to update it before calculating the checksum.
Change-Id: Id23234efb80ea3747a0f8a5c7bf8621748d27635
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
If a PMD writes too many log messages using rte_vlog(), the
pipe for logging can fill and then rte_vlog() will block
on fflush() while it waits for something to read from the other
side of the pipe. That will never happen since the process node
that would read the other side of the pipe runs in the
same thread.
Set the write fd to non-blocking before the call to
rte_openlog_stream(). If the pipe is full, calls to write() or
fflush() will fail but execution will continue.
Change-Id: I0e5d710629633acda5617ff29897d6582c255d57
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Recognize the PF and VF device IDs for the Mellanox adapter
used on Azure.
Change-Id: Ic7b36b37ac93db2b696354ffe6fa2b6d62ee3801
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I7513c41307e62068ab5d9739cac393675c6066f8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|