Age | Commit message (Collapse) | Author | Files | Lines |
|
Use consistent API types.
Type: fix
Change-Id: I11cc7f6347b7a60e5fd41e54f0c7994e2d81199f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
Type: feature
Change-Id: I0129ad6ace44a50a8a3b26db8e445cd06b2b49e8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Plug-in for IPv6 Segment Routing Mobile
This funcion was developed by
Signed-off-by: Satoru Matsuchima <satoru.matsushima@gmail.com>
Signed-off-by: Filip Varga <filipvarga89@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Ie995adc73d8f8d444339aab71619c3599e69f12d
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
Type: refactor
Change-Id: I2c6b59013bfd21136a2955442c779685f951932b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I9015fc60e8d77e5d5ac36bf2862c1fe794addb81
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I5b03e5de111c3a3b8da4e9f02cba0aa99e3ee9f3
|
|
Type: refactor
Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1964e4f0afe6f030ae9c8e28fcba5fd81aa1f130
|
|
Type: feature
Change-Id: I22e2ef34631c9432311ff6457504e0649e0512b4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
New callback vnet_hw_interface_add_del_mac_address().
Add or delete secondary MAC addresses on a hardware interface.
This will allow packets to be processed which have a destination
MAC address other than the primary programmed MAC address without
needing to put the device into promiscuous mode.
Change-Id: I6beecbcb8932fc1fe45b567f76fa3706feefae2c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia63d920788add2584060a240321acced7a471640
|
|
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files.
In two formats, "custom-dump" and "dump". "dump" gives a human friendly list,
and "custom-dump" is meant to give a list of commands that can be fed to VAT.
This patch only deals with "dump".
Prior to this fix, auto-generation was only done for the basic types.
This fix adds support for any type, including lists, and supports pretty-printing
of enums, strings, IP addresses, MAC addresses and so on.
Usage: api trace dump <api-trace-file>
For example
Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40
---------- trace 48 -----------
vl_api_sw_interface_set_flags_t:
_vl_msg_id: 75
client_index: 0
context: 10
sw_if_index: 1
flags: IF_STATUS_API_FLAG_ADMIN_UP
---------- trace 49 -----------
vl_api_sw_interface_add_del_address_t:
_vl_msg_id: 88
client_index: 0
context: 11
sw_if_index: 1
is_add: 1
del_all: 0
prefix: 172.16.1.1/24
---------- trace 51 -----------
vl_api_cli_inband_t:
_vl_msg_id: 819
client_index: 0
context: 13
cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable
---------- trace 58 -----------
vl_api_ip_neighbor_add_del_t:
_vl_msg_id: 199
client_index: 0
context: 20
is_add: 1
neighbor:
sw_if_index: 2
flags: IP_API_NEIGHBOR_FLAG_NONE
mac_address: 0202.0000.ff02
ip_address: fd01:2::2
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Idbba4ab6a412b75338e3149e51476693f0862f16
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
vpp_api_test load vmxnet3_test_plugin.so error:
"load_one_plugin:42:/vpp/lib/vpp_api_test_plugins/vmxnet3_test_plugin.so:
undefined symbol: unformat_vlib_pci_addr"
Type: fix
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Change-Id: I444aa05d0bc3c4f4f25082388243f1adb305dd0a
|
|
Not all interfaces have the same characteristics within the bonding group.
For active-backup mode, we should do our best to select the slave that
performs the best as the primary slave. We already did that by preferring
the slave that is local numa. Sometimes, this is not enough. For example,
when all are local numas, the selection is arbitrary. Some slave interfaces
may have higher speed or better qos than the others. But this is hard to
infer.
One rule does not fit all. So we let the operator to optionally specify the
weight for each slave interface. Our primary slave selection rule is now
1. biggest weight
2. is local numa
3. current primary slave (to avoid churn)
4. lowest sw_if_index (for deterministic behavior)
This selection rule only applies to active-backup mode which only one slave
is used for forwarding traffic until it becomes unreachable. At that time,
the next "best" slave candidate is automatically promoted. The slaves are
sorted according to the preference rule when they are up. So there is no need
to find the next best candidate when the primary slave goes down.
Another good thing about this rule is when the down slave comes back up, it
is selected as the primary slave again unless there is indeed a "better"
slave than this down slave that were added during that period.
To set the weight for the slave interface, do this after the interface is
enslaved
set interface bond <interface-name> weight <value>
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
|
|
Enforce that variable length fields are the last element of API messages.
Add a 'fixed' version of string type, since dealing with
multiple variable length strings turned out too painful
for the C language bindings.
The string type is now:
{
string name[64]; // NUL terminated C-string. Essentially decays to u8 name[64]
string name[]; // Variable length string with embedded len field (vl_api_string_t)
};
The latter notation could be made available to other types as well.
e.g.
{
vl_api_address_t addresses[];
}
instead of
{
u32 n_addr;
vl_api_address_t addresses[n_addr];
};
Type: fix
Change-Id: I18fa17ef47227633752ab50453e8d20a652a9f9b
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit 2959d42feb576c0e00c28c4e27658b25f6c783e9.
Lacks client side fixes.
Type: fix
Change-Id: Ib94b18e74325cede41ed1733e57896f17a952526
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Explicitly using string type in API allows for autogenerating tools to print
strings instead of hex-dumping byte strings.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I573962d6b34d5d10aab9dc6a5fdf101c9b12a6a6
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I823c2cd307a4613653a2d20f564dda062d4da31b
|
|
Use of consistent API types for interface.api
Type: fix
Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Add gso option in create vhost interface to support gso and checksum
offload.
Tested with the following startup options in qemu:
csum=on,gso=on,guest_csum=on,guest_tso4=on,guest_tso6=on,guest_ufo=on,
host_tso4=on,host_tso6=on,host_ufo=on
Type: feature
Change-Id: I9ba1ee33677a694c4a0dfe66e745b098995902b8
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: feature
Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: I514b40026986f3828c8727453456b20a0a45f3af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
If numa-only is set, Only slaves on local numa node
transmit pkts if have at least one, otherwise the bond
interface works as usual.
CLI change:
create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}]
[hw-addr <mac-address>] [id <if-id>]
The new member "u8 numa_only;" is also added to bond_create_if_args_t.
Type: feature
Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Cleaned up a few instances of side-bet elog_string hash table
usage. Elog_string handles that problem itself.
Add cli commands to vat to initialize, enable/disable, and save an
event log.
Event logging at the same time in both vpp and vat yields a pair
of event logs which can be merged by the "test_elog" tool.
Type: refactor
Change-Id: I8d6a72206f2309c967ea1630077fba31aef47f93
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Ticket: VPP-1649
Change-Id: I93a393eca80065c379035478500e75e855f39b12
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Change-Id: Ie085713f45672e112993638e01cdb325f451020a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length',
but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'.
Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'.
Type: refactor
Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
using inlines exposes the users to the internal data types used by VPP, namely vec.h. This file does not compile with a C++ compiler.
Type: feature
Change-Id: I1544fdd9eae998309f865df61df78571bdb96903
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I808ae95666b82f04979b57cfe237a8f83bb68264
Type: fix
Fixes: 283cd2e9af
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This patch adds support to configure host mtu size using
api, cli or startup.conf.
Type: feature
Change-Id: I8ab087d82dbe7dedc498825c1a3ea3fcb2cce030
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I492b6e88acadf0ab0e4d7b1c0c5d1cab84c1726f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Previous use of strndup() required user to remember to call free().
Now return a vector pointing directly to the API message string.
Of course user must remember to copy the string out if lifetime
is longer than API message lifetime.
Change-Id: Ib5e2b3d52d258e1a42ea9ea9a9e04abbe360e2bf
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Build api trace message print fns into the built-in copy of api_format.c
Optimize memory allocator behavior when the api trace wraps.
Type: Fix
Change-Id: If799d8784a459f981fc9ee3a3ca03d3f63b2bcd0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: refactor
Change-Id: I8489ccd54411c2aa9355439c5641dc31012c64a2
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
there's no use case to just change the key of an SA. instead the SA
should be renegociated and the new SA applied to the existing SPD entry
or tunnel.
the set_key functions were untested.
Type: refactor
Change-Id: Ib096eebaafb20be7b5501ece5a24aea038373002
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions
- move the punt nodes into punt_node.c
- improve tests (test that the correct packets are punted to the registered socket)
Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7b735f5a540e8c278bac88245acb3f8c041c49c0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Add a registration overwritten warning to ip4_icmp_register_type(...)
Change-Id: I6c2aabdb979b54ec49e827225acc74559ac4caab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Idc22377ca705a45300faaf8acbc3cae5f10e1c92
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I36ad1ef2a53af3d3f3a6348bc189b17e9e4e21bd
Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
|
|
Native virtio device through legacy driver can't support configurable queue size.
Change-Id: I76c446a071bef8a469873010325d830586aa84bd
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I5010cd34123c6498230dedac6ba8dd774a1085f9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0b47590400aebea09aa1b27de753be638e1ba870
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Icdcbac7453baa837a9c0c4a2401dff4a6aa6cba0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|