Age | Commit message (Collapse) | Author | Files | Lines |
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Idbba4ab6a412b75338e3149e51476693f0862f16
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
vpp_api_test load vmxnet3_test_plugin.so error:
"load_one_plugin:42:/vpp/lib/vpp_api_test_plugins/vmxnet3_test_plugin.so:
undefined symbol: unformat_vlib_pci_addr"
Type: fix
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Change-Id: I444aa05d0bc3c4f4f25082388243f1adb305dd0a
|
|
Not all interfaces have the same characteristics within the bonding group.
For active-backup mode, we should do our best to select the slave that
performs the best as the primary slave. We already did that by preferring
the slave that is local numa. Sometimes, this is not enough. For example,
when all are local numas, the selection is arbitrary. Some slave interfaces
may have higher speed or better qos than the others. But this is hard to
infer.
One rule does not fit all. So we let the operator to optionally specify the
weight for each slave interface. Our primary slave selection rule is now
1. biggest weight
2. is local numa
3. current primary slave (to avoid churn)
4. lowest sw_if_index (for deterministic behavior)
This selection rule only applies to active-backup mode which only one slave
is used for forwarding traffic until it becomes unreachable. At that time,
the next "best" slave candidate is automatically promoted. The slaves are
sorted according to the preference rule when they are up. So there is no need
to find the next best candidate when the primary slave goes down.
Another good thing about this rule is when the down slave comes back up, it
is selected as the primary slave again unless there is indeed a "better"
slave than this down slave that were added during that period.
To set the weight for the slave interface, do this after the interface is
enslaved
set interface bond <interface-name> weight <value>
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
|
|
Enforce that variable length fields are the last element of API messages.
Add a 'fixed' version of string type, since dealing with
multiple variable length strings turned out too painful
for the C language bindings.
The string type is now:
{
string name[64]; // NUL terminated C-string. Essentially decays to u8 name[64]
string name[]; // Variable length string with embedded len field (vl_api_string_t)
};
The latter notation could be made available to other types as well.
e.g.
{
vl_api_address_t addresses[];
}
instead of
{
u32 n_addr;
vl_api_address_t addresses[n_addr];
};
Type: fix
Change-Id: I18fa17ef47227633752ab50453e8d20a652a9f9b
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit 2959d42feb576c0e00c28c4e27658b25f6c783e9.
Lacks client side fixes.
Type: fix
Change-Id: Ib94b18e74325cede41ed1733e57896f17a952526
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Explicitly using string type in API allows for autogenerating tools to print
strings instead of hex-dumping byte strings.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I573962d6b34d5d10aab9dc6a5fdf101c9b12a6a6
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I823c2cd307a4613653a2d20f564dda062d4da31b
|
|
Use of consistent API types for interface.api
Type: fix
Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Add gso option in create vhost interface to support gso and checksum
offload.
Tested with the following startup options in qemu:
csum=on,gso=on,guest_csum=on,guest_tso4=on,guest_tso6=on,guest_ufo=on,
host_tso4=on,host_tso6=on,host_ufo=on
Type: feature
Change-Id: I9ba1ee33677a694c4a0dfe66e745b098995902b8
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: feature
Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: I514b40026986f3828c8727453456b20a0a45f3af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
If numa-only is set, Only slaves on local numa node
transmit pkts if have at least one, otherwise the bond
interface works as usual.
CLI change:
create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}]
[hw-addr <mac-address>] [id <if-id>]
The new member "u8 numa_only;" is also added to bond_create_if_args_t.
Type: feature
Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Cleaned up a few instances of side-bet elog_string hash table
usage. Elog_string handles that problem itself.
Add cli commands to vat to initialize, enable/disable, and save an
event log.
Event logging at the same time in both vpp and vat yields a pair
of event logs which can be merged by the "test_elog" tool.
Type: refactor
Change-Id: I8d6a72206f2309c967ea1630077fba31aef47f93
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Ticket: VPP-1649
Change-Id: I93a393eca80065c379035478500e75e855f39b12
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Change-Id: Ie085713f45672e112993638e01cdb325f451020a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length',
but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'.
Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'.
Type: refactor
Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
using inlines exposes the users to the internal data types used by VPP, namely vec.h. This file does not compile with a C++ compiler.
Type: feature
Change-Id: I1544fdd9eae998309f865df61df78571bdb96903
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I808ae95666b82f04979b57cfe237a8f83bb68264
Type: fix
Fixes: 283cd2e9af
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This patch adds support to configure host mtu size using
api, cli or startup.conf.
Type: feature
Change-Id: I8ab087d82dbe7dedc498825c1a3ea3fcb2cce030
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I492b6e88acadf0ab0e4d7b1c0c5d1cab84c1726f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Previous use of strndup() required user to remember to call free().
Now return a vector pointing directly to the API message string.
Of course user must remember to copy the string out if lifetime
is longer than API message lifetime.
Change-Id: Ib5e2b3d52d258e1a42ea9ea9a9e04abbe360e2bf
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Build api trace message print fns into the built-in copy of api_format.c
Optimize memory allocator behavior when the api trace wraps.
Type: Fix
Change-Id: If799d8784a459f981fc9ee3a3ca03d3f63b2bcd0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: refactor
Change-Id: I8489ccd54411c2aa9355439c5641dc31012c64a2
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
there's no use case to just change the key of an SA. instead the SA
should be renegociated and the new SA applied to the existing SPD entry
or tunnel.
the set_key functions were untested.
Type: refactor
Change-Id: Ib096eebaafb20be7b5501ece5a24aea038373002
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions
- move the punt nodes into punt_node.c
- improve tests (test that the correct packets are punted to the registered socket)
Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7b735f5a540e8c278bac88245acb3f8c041c49c0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Add a registration overwritten warning to ip4_icmp_register_type(...)
Change-Id: I6c2aabdb979b54ec49e827225acc74559ac4caab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Idc22377ca705a45300faaf8acbc3cae5f10e1c92
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I36ad1ef2a53af3d3f3a6348bc189b17e9e4e21bd
Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
|
|
Native virtio device through legacy driver can't support configurable queue size.
Change-Id: I76c446a071bef8a469873010325d830586aa84bd
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I5010cd34123c6498230dedac6ba8dd774a1085f9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0b47590400aebea09aa1b27de753be638e1ba870
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Icdcbac7453baa837a9c0c4a2401dff4a6aa6cba0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6a76907dc7bed2a81282b63669bea2219d6903c9
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd.
Allow time for CSIT to accommodate.
Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2
Signed-off-by: ot@cisco.com
|
|
Use of consistent API types for interface.api
Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
for easy integration with ptoducts running their own Ike stack.
Without the VPP IKE plugin loaded, the product is free to handle
IKE packets as it pleases.
Change-Id: Id0839f4d58b797f4c2da0382eb499fc08b05f66f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1) stats are accessed via the stat segment which is more condusive to
monitoring
2) stats are accurate in the presence of multiple threads. There's no
guarantee that an SA is access from only one worker.
Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
in the same maaner as with other tunnel tyeps we use
the FIB to cache and track the destination used to reach
the tunnel endpoint. Post encap we can then ship the packet
straight to this adjacency and thus elide the costly second
lookup.
- SA add and del function so they can be used both directly
from the API and for tunnels.
- API change for the SA dump to use the SA type
- ipsec_key_t type for convenience (copying, [un]formating)
- no matching tunnel counters in ipsec-if-input
Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ia30ff1e62304e65f27497ce05f8e40631c06d69e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
|
|
- return the stats_index of each SPD in the create API call
- no ip_any in the API as this creates 2 SPD entries. client must add both v4 and v6 explicitly
- only one pool of SPD entries (rhter than one per-SPD) to support this
- no packets/bytes in the dump API. Polling the stats segment is much more efficient
(if the SA lifetime is based on packet/bytes)
- emit the policy index in the packet trace and CLI commands.
Change-Id: I7eaf52c9d0495fa24450facf55229941279b8569
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- use enums to enumerate the algoritms and protocols that are supported
- use address_t types to simplify encode/deocde
- use typedefs of entry objects to get consistency between add/del API and dump
Change-Id: I7e7c58c06a150e2439633ba9dca58bc1049677ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I82dceaa27a7b0c96de077cf283e4f64aa426f271
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I46ec5ba03d61c1fe0aba92f649f43746b5292cc3
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Change-Id: I26f99d95f52c9fe107d17dcbbf5c6185523beade
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|