summaryrefslogtreecommitdiffstats
path: root/src/vat/api_format.c
AgeCommit message (Collapse)AuthorFilesLines
2018-03-21bond: Add bonding driver and LACP protocolSteven1-1/+476
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>
2018-03-14Improve l2_macs_events API to provide MAC move informationJohn Lo1-2/+2
Change mac_entry layout in l2_macs_event API message so the MAC entry can be either add, delete or move where the sw_if_index of an existing MAC entry changed. Also added a 8-bit flags field in mac_entry for any future expansion. Change-Id: I3bf9e1cf2556f2938202025a5d0772c2ce2fc99f Signed-off-by: John Lo <loj@cisco.com>
2018-03-12SPAN: Add 'is_l2" flag to DETAILS response messages.Jon Loeliger1-2/+4
Change-Id: I375bb0e663bc082d98a29fb101c653557ddc8f55 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-03-09MPLS Unifom modeNeale Ranns1-8/+8
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-02tapv2: CLI and binary API fixesSteven1-7/+7
1. When interface create encouners an error (see test below), the same id cannot be used again. This is due to hash_set is called too early in the function. After the hash entry is set, there are different errors may cause the interface create to be aborted. But we didn't remove the hash entry when error is encountered. The fix is to move the hash_set call near the end which has no more "goto error" DBGvpp# create tap id 1 rx-ring-size 1021 tx-ring-size 1021 create tap id 1 rx-ring-size 1021 tx-ring-size 1021 create tap: ring size must be power of 2 DBGvpp# create tap id 1 rx-ring-size 1024 tx-ring-size 1024 create tap id 1 rx-ring-size 1024 tx-ring-size 1024 create tap: interface already exists DBGvpp# 2. multiple issues exist with api_format.c with the below command binary-api tap_create_v2 id 4 hw-addr 90:e2:ba:76:cf:2f rx-ring-size 1024 tx-ring-size 1024 - hw_addr is not taken due to the test for random mac is inverted - id is an integer, not a string - integer values were not converted to network format Change-Id: I5a669d702a80ad158517df46f0ab089e4d0d692e Signed-off-by: Steven <sluong@cisco.com>
2018-02-15Optimize GRE Tunnel and add support for ERSPAN encapJohn Lo1-11/+23
Change GRE tunnel to use the interface type where the same encap node is used as output node for all GRE tunnels, instead of having dedicated output and tx node for each tunnel. This allows for more efficient tunnel creation and deletion at scale tested at 1000's of GRE tunnels. Add support for ERSPAN encap as another tunnel type, in addition to the existing L3 and TEB types. The GRE ERSPAN encap supported is type 2 thus GRE encap need to include sequence number and GRE- ERSPAN tunnel can be created with user secified ERSPAN session ID. The GRE tunnel lookup hash key is updated to inclue tunnel type and session ID, in addition to SIP/DIP and FIB index. Thus, GRE-ERSPAN tunnel can be created, with the appropriate session ID, to be used as output interface for SPAN config to send mirrored packets. Change interface naming so that all GRE tunnels, irrespective of tunnel type, uses "greN" where N is the instance number. Removed interface reuse on tunnel creation and deletion to enable unfied tunnel interface name. Add support of user specified instance on GRE tunnel creation. Thus, N in the "greN" interface name can optionally be specified by user via CLI/API. Optimize GRE tunnel encap DPO stacking to bypass load-balance DPO node since packet output on GRE tunnel always belong to the same flow after 5-tupple hash. Change-Id: Ifa83915744a1a88045c998604777cc3583f4da52 Signed-off-by: John Lo <loj@cisco.com>
2018-02-12Fix the order of RFC2685 fields in the output.Igor Mikhailov (imichail)1-2/+2
Also, output VSS info with names according to RFC6607 (3.5). Change-Id: I27a383515aca1a74dced2363a0c407b2791e5f05 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-02-07VXLAN: Allow user to specify a custom vxlan tunnel instance id.Jon Loeliger1-4/+13
If one is not selected by the user, the next available id will be allocated, thus maintaining backward compatibility. Change-Id: I4691ed0638b8072f9cfa9f20b9fe4f981e708800 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-02-07classifier-based ACL: refactor + add output ACLAndrew Yourtchenko1-2/+60
For implementation of MACIP ACLs enhancement (VPP-1088), an outbound classifier-based ACL would be needed. There was an existing incomplete code for outbound ACLs, it looked almost exact copy of input ACLs, minus the various enhancements, trying to sync that code seemed error-prone and cumbersome to maintain in the longer run. This change refactors the input+output ACLs processing into a unified routine (thus any changes will have effect on both), and also adds the API to set the output interface ACL, with the same format and semantics as the existing input one (except working on output ACL of course). WARNING: IP outbound ACL in L3 mode clobbers the ip.* fields in the vnet_buffer_opaque_t, since the code is using l2_classify.* The net_buffer (p0)->ip.save_rewrite_length is rescued into l2_classify.pad.l2_len, and used to rewind the header in case of drop, so that ipX_drop prints something sensible. Change-Id: I62f814f1e3650e504474a3a5359edb8a0a8836ed Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-01-18tapv2: add option to set host-side default gwDamjan Marion1-1/+14
Change-Id: I76fd655ecd9445299b94b3b5af10e7b1588584e4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-15svm: refactor memfd and remove ssvm_ethFlorin Coras1-3/+2
Change-Id: Icde296e956eb89ea3a17d547f04a833916ec6440 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-11Remove vpp_api_test interface name filter catalogDave Barach1-66/+9
If I remember correctly, I added the interface name filter catalog to avoid cluttering up the vat interface table with [unused] packet generator interfaces. Since we no longer create pg interfaces we're not planning to use, the filter catalog does more harm than good. Every new interface name prefix would have had to be added to the list, and folks wouldn't likely know they should do that... Change-Id: I4067f8ba70ad13c8dc5ebaf21a23759a2cf2675e Signed-off-by: Dave Barach <dave@barachs.net>
2018-01-09api: refactor vlibmemoryFlorin Coras1-1/+1
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-05sock api: add infra for bootstrapping shm clientsFlorin Coras1-9/+63
- add function to sock client that bootstraps shm api - allow sock clients to request custom shm ring configs Change-Id: Iabc1dd4f0dc8bbf8ba24de37f4966339fcf86107 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-14tap_v2: include host-side parameters in the dump binary APIMilan Lenco1-3/+38
Change-Id: I097a738b96a304621520f1842dcac7dbf61a8e3f Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2017-12-08Remove the unused 'create VRF if needed' API parametersNeale Ranns1-16/+0
Change-Id: I35e166feeb0ac1e0e570efe07cb5f4cbeb5b8670 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-12-08tapv2: multiple improvementsDamjan Marion1-20/+29
- change interface naming scheme - rework netlink code - add option to set link address, namespace Change-Id: Icf667babb3077a07617b0b87c45c957e345cb4d1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-02tap_v2: multiple improvementsDamjan Marion1-12/+49
- add support for assigning tap interface to the bridge - add support for assigning tap interface host side ip4 and ip6 address - host namespace can be specified as PID (pid:12345) or full path to file - automatically bring linux interface up Change-Id: I1cf7c3cad9a740e430cc1b9c2bb0aad0ba4cc8d8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-01virtio: fix coverity warningsSteven1-3/+1
Fix 3 coverity warnings 1. api_format.c: init net_ns = 0 and remove its corresponding vec_add and vec_free 2. netlink.c (reported in tap.c before the code was removed): resource leaked due to fd is not close 3. tap.c: subtract 1 for size when calling strncpy to accommodate the terminated NULL character Change-Id: Iff4e66604862f0c06dac227b8cfd48d3979e41a5 Signed-off-by: Steven <sluong@cisco.com>
2017-11-30virtio: fast TAP interfaces with vhost-net backendDamjan Marion1-0/+259
Change-Id: Ided667356d5c6fb9648eb34685aabd6b16a598b7 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Steven Luong <sluong@cisco.com>
2017-11-16Add Support of DHCP VSS Type 0 where VPN-ID is ASCIIJohn Lo1-32/+46
Enhence support of DHCP VSS (Virtual Subnet Selection) to include VSS type 0 where VSS info is a NVT (Network Virtual Terminal) ASCII VPN ID where the ASCII string MUST NOT be terminated with a zero byte. Existing code already support VSS type 1, where VSS information is a RFC 2685 VPN-ID of 7 bytes with 3 bytes OUI and 4 bytes VPN index, and VSS type 255 indicating global VPN. Change-Id: I54edbc447c89a2aacd1cc9fc72bd5ba386037608 Signed-off-by: John Lo <loj@cisco.com>
2017-11-10Break up vpe.apiNeale Ranns1-42/+0
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-10session: add app ns index to ns create apiFlorin Coras1-1/+35
Change-Id: I86bfe4e8b0a899cc54c9b37eeb5eec701d0baf3d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-11-09BIERNeale Ranns1-0/+158
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07vat: session_rules_dump missing network to host conversionSteven1-8/+10
Add clib_net_to_host conversion for integer fields greater than two bytes Change-Id: I187d8d1adbb1e534d58bd69bfbc1c58df5b8fc1e Signed-off-by: Steven <sluong@cisco.com>
2017-11-07ip: add container proxy apiFlorin Coras1-2/+60
Change-Id: Id324a757517f85973097e20e2eb88d64ae0e931b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-11-06session: add rule tagsFlorin Coras1-7/+19
Change-Id: Id5ebb410f509ac4c83d60e48efd54e00035e5ce6 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-11-05session: add api to dump rulesFlorin Coras1-1/+97
Change-Id: Ie42fd77e75e86a45cfe5951768c4638f27fdc3aa Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-31LISP: add P-ITR/P-ETR/xTR API handlers, ONE-24Filip Tehlar1-0/+317
Change-Id: I25937cd7470c826d1e833e65530ae959c39139d8 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-10-31l2fib: MAC: Fix uint64 to u8 byte arrayMohsin Kazmi1-20/+10
As per proposal on the mailing list, this patch fixes the represntation of MAC address in VPP API calls for · L2fib_add_del · L2_fib_table_details Change-Id: I31e17efd1a6314cded69666e693cb8fc33158d02 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2017-10-29devices: Add binary API for set interface <interface> rx-modeSteven1-0/+62
Also add vat test code to test the subject API. The format is sw_interface_set_rx_mode sw_if_index <index> [queue <id>] <polling|nterrupt|adaptive> Change-Id: Ib810d85d430077865bead8cc08a070f8ae478225 Signed-off-by: Steven <sluong@cisco.com>
2017-10-28session: rules tablesFlorin Coras1-3/+96
This introduces 5-tuple lookup tables that may be used to implement custom session layer actions at connection establishment time (session layer perspective). The rules table build mask-match-action lookup trees that for a given 5-tuple key return the action for the first longest match. If rules overlap, ordering is established by tuple longest match with the following descending priority: remote ip, local ip, remote port, local port. At this time, the only match action supported is to forward packets to the application identified by the action. Change-Id: Icbade6fac720fa3979820d50cd7d6137f8b635c3 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-26session: swap appns secret to host byte orderFlorin Coras1-1/+1
Change-Id: I355433e0f07b328c441ed642705b31ca5157fabe Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-26Allow IPsec interface to have SAs resetMatthew Smith1-0/+54
Make it easier to integrate with external IKE daemon. IPsec interfaces can have one or both SAs replaced after creation. This allows for the possibility of setting a new child SA on an interface when rekeying occurs. It also allows for the possibility of creating an interface ahead of time and updating the SA when parameters that are negotiated during IKE exchange become known. Change-Id: I0a31afdcc2bdff7098a924a51abbc58bdab2bd08 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-10-20Add reverse DNS (ip to name) resolutionDave Barach1-3/+76
Change-Id: Ic531d820b1846ff7363e5c396ac0b1176e87b401 Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-19Remove unused 'not_last' parameter from ip_add_del_routeMarek Gradzki1-4/+0
Vat supports setting value for the parameter, but 'not_last' is ignored by ip_add_del_route handler, so can be removed. This patch - updates ip.api, - removes vat handlers - updates vpp_papi_provider.py (also mpls_route_add_del with unused not_last) Change-Id: Ife15de123db4bc8247103a29b90bce1988e46534 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-10-18CSIT-844: fix binary api rx pthread heap push/popDave Barach1-1/+1
We need to push/pop the rx pthread's heap without affecting other thread(s). Search clib_per_cpu_mheaps, locate an unused slot. Duplicate the main thread heap pointer in that slot, and set __os_thread_index appropriately. Miscellaneous cleanups. Print exec_inband results as a vector, instead of as a format string. Don't bail out of vpp_api_test with results pending, e.g. at the end of a vpp_api_test script. Even though vpp will eventuallly garbage-collect them, We don't want to leave allocated reply messages lurking in the api message allocation rings... Change-Id: I0e8a25d1ff0d3700249dc330d079db16c2fcbc55 Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-17VPP-1032: fix coverity warningsDave Barach1-7/+7
Change-Id: Ic3a0c51e5408921051deaf2e50372d9654574b27 Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-15Revert "Enforce FIB table creation before use"Florin Coras1-3/+19
This reverts commit f9342023c19887da656133e2688a90d70383b0c5. Reverting to unblock master. No idea why jjb +1ed this patch! On closer inspection it looks like it -1ed it and subsequently changed opinion. CSIT tests should be fixed before re-merging. Change-Id: I26608912a962c52083073e16c7c9d2cc44a3cc8d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-14Add API call to set keys on IPsec tunnel intfMatthew Smith1-0/+77
There was already a CLI command and a libvnet function to set the keys on an existing IPsec tunnel interface. Expose this via the API. Change-Id: I226a9616f680fc022f04447177a2e8232690657f Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-10-13Enforce FIB table creation before useNeale Ranns1-19/+3
last i the serise of the use of the FIB table create/delete API. VPP now forces the tables to have been explicitly creted before they are used. Change-Id: Ifde3b1bbb76697a01ab71bce4f5264e6d1725467 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-13VPP-1027: DNS name resolverDave Barach1-5/+172
This patch is a plausible first-cut, suitable for initial testing by vcl (host stack client library). Main features; - recursive name resolution - multiple ip4/ip6 name servers - cache size limit enforcement - currently limited to 65K - ttl / aging - static mapping support - show / clear / debug CLI commands Binary APIs provided for the following: - add/delete name servers - enable/disable the name cache - resolve a name To Do list: - Respond to ip4/ip6 client DNS requests (vs. binary API requests) - Perf / scale tuning - map pending transaction ids to pool indices, so the cache can (greatly) exceed 65K entries - Security improvements - Use unpredictable dns transaction IDs, related to previous item - Make sure that response-packet src ip addresses match the server - Add binary APIs - deliver raw response data to clients - control recursive name resolution - Documentation Change-Id: I48c373d5c05d7108ccd814d4055caf8c75ca10b7 Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-12LLDP: Add Management Address TLVSteve Shin1-2/+19
- Management Address TLV is added as per IEEE Std 802.1AB-2009. - Support of management ipv4/ipv6 addresses and OID. Change-Id: I57c14741774390809ce5a829cc087947424432c7 Signed-off-by: Steve Shin <jonshin@cisco.com>
2017-10-10session: add support for application namespacingFlorin Coras1-3/+55
Applications are now provided the option to select the namespace they are to be attached to and the scope of their attachement. Application namespaces are meant to: 1) constrain the scope of communication through the network by association with source interfaces and/or fib tables that provide the source ips to be used and limit the scope of routing 2) provide a namespace local scope to session layer communication, as opposed to the global scope provided by 1). That is, sessions can be established without assistance from transport and network layers. Albeit, zero/local-host ip addresses must still be provided in session establishment messages due to existing application idiosyncrasies. This mode of communication uses shared-memory fifos (cut-through sessions) exclusively. If applications request no namespace, they are assigned to the default one, which at its turn uses the default fib. Applications can request access to both local and global scopes for a namespace. If no scope is specified, session layer defaults to the global one. When a sw_if_index is provided for a namespace, zero-ip (INADDR_ANY) binds are converted to binds to the requested interface. Change-Id: Ia0f660bbf7eec7f89673f75b4821fc7c3d58e3d1 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-4/+4
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-06Initial GENEVE TUNNEL implementation and tests.Marco Varlese1-0/+377
Notes on this first implementation: * First version of the implementation does NOT support GENEVE OPTIONS HEADER: it isn't well understood what the purpose of the OPTIONS will be and/or what content would be placed in the variable option data; Once the IETF work will evolve and further information will be available it could be possible to modify the frame rewrite to contemplate the actual GENEVE OPTIONS. Change-Id: Iddfe6f408cc45bb0800f00ce6a3e302e48a4ed52 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine1-1/+1
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-10-04Add API support to dump IPsec SAsMatthew Smith1-0/+117
Add an API request message type to dump IPsec SAs. Either all IPsec SAs can be dumped or it can be limited to a single SA ID (numeric ID set at creation time - not an index). Add a handler for incoming messages with the new request type. Add an API response message type containing the data for an IPsec SA. Add VAT support for new message type. Change-Id: Id7828d000efc637dee7f988a87d3f707a8b466b7 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-10-03Repair vlib API socket serverDave Barach1-116/+254
- Teach vpp_api_test to send/receive API messages over sockets - Add memfd-based shared memory - Add api messages to create memfd-based shared memory segments - vpp_api_test supports both socket and shared memory segment connections - vpp_api_test pivot from socket to shared memory API messaging - add socket client support to libvlibclient.so - dead client reaper sends ping messages, container-friendly - dead client reaper falls back to kill (<pid>, 0) live checking if e.g. a python app goes silent for tens of seconds - handle ping messages in python client support code - teach show api ring about pairwise shared-memory segments - fix ip probing of already resolved destinations (VPP-998) We'll need this work to implement proper host-stack client isolation Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-27LISP: add API handlers for set/get transport protocolFilip Tehlar1-0/+132
Change-Id: Ib675164c475edcdbe3013df7b847adf5e050c53f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>