Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I8c226b91cc45f6f345444afd8d168e1292371582
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I3124238ab4d43bcef5590bad33a4ff0b5d8b7d15
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I8aba11142daeacce892ec529c2229ec54ee427e2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This is a new commit for code under a different maintainer.
Change-Id: I79fa403fec6a312238a9a4b18b35dbcafaa05439
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I6c0d5aec6ee96a0d40358f0e09a0901b22265063
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I7dd48c8a2c77f82a2c1aa8311b062f5f0bc4e3fd
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I114e93b6bc71cfcdcfe6d3ddde26f77118e36ab8
Signed-off-by: John Lo <loj@cisco.com>
|
|
route ADD API changed to return the stats segment index to use to read the counters
Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Two flags to disable mergable rx buffers and indirect
descriptors are added to api.
Change-Id: Iba0ee9c48d19dfc3d3420a3fdaf44a1a1d325e99
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I2e06de176f4272b4b7475857b42fe0d106382b6f
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I9636a4e631cacf22d3189e292888c34f615298b0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
When compiling VPP with GCC-8.2.0, it gives below error messages.
src/vat/api_format.c: In function ‘api_sr_localsid_add_del’:
src/vat/api_format.c:10839:7: error: ‘memcpy’ forming offset [5, 16] is out of the bounds [0, 4] of object ‘nh_addr4’ with type ‘ip4_address_t’ {aka ‘union <anonymous>’} [-Werror=array-bounds]
clib_memcpy (mp->nh_addr6, &nh_addr4, sizeof (mp->nh_addr6));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/vat/api_format.c:10809:17: note: ‘nh_addr4’ declared here
ip4_address_t nh_addr4;
^~~~~~~~
Change-Id: I9065a3407d53c1f91974b32381972c4edb45144c
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Change-Id: I9228ce29e9d2fc862a2d076b4072bcdd728d6dd1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
VPP-1368
Change-Id: I6373f76ba87184a91b517712eafb4ee1f5cea59e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I8d42f6ed58ec34298d41edcb3d783e7e9ded3eec
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Remove useless unsigned comparisions: "(unsigned) value < 0", correct
a couple of incorrect limit checks.
Change-Id: I9606c4057df157f770d59535457cb9df1cfd1f35
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I57b4ebca29c0b185770373e8878f89a9bd13b742
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Only remaining traces of MAP in the src/vnet is now in buffer.h.
Awaiting a new buffer opaque API (hint, hint).
Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Jira ticket VPP-1196
Jira ticket VPP-1081
Jira ticket VPP-1078
Jira ticket VPP-1217
Change-Id: Id7e85229cae1017acb0aa4ca63ced334e6dafb8d
Signed-off-by: pcamaril <pcamaril@cisco.com>
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
Signed-off-by: pcamaril <pcamaril@cisco.com>
Signed-off-by: Michal Cmarada <michal.cmarada@pantheon.tech>
|
|
stats { interval <no> socket-name <name> | default }
Where the default socket is in /run/vpp/stats.sock
Change-Id: Idd501b328c662804d4ccd58034b0ea6b8aa1f89a
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Seems to have minimal-to-zero performance consequences. Data appears
accurate: result match the debug CLI output. Checked at low rates, 27
MPPS sprayed across two worker threads.
Change-Id: I09ede5150b88a91547feeee448a2854997613004
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
ip4 vxlan cli/api (using flow infra) to create flows and enable them on
different hardware (currently tested with i40e)
to offload a vxlan tunnel onto hw:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1
to remove offload:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 del
TODO:ipv6 handling
Change-Id: I70e61f792ef8e3f007d03d7df70e97ea4725b101
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
also export per-node error counters
directory entries implement object types
Change-Id: I8ce8e0a754e1be9de895c44ed9be6533b4ecef0f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps
- add the DHCP client dump API
- update VOM to refelct API changes
- rename VOM class dhcp_config* dhcp_client*
- the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read
Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Improve deletion of L2FIB MAC entry using l2fib_add_del API. If
sw_if_index param specified in th API is non-zero, check that its
value match that of the MAC entry to proceed with deletion.
Improve "show l2fib" CLI to allow display of all entries, learned
entries only, or added ovia CLI/API entries only. For added entry,
show "no" under the age column to indicate entry does not age.
Change-Id: I0bd2582c2b6bac268e551e4f8ca6dab2be4400ad
Signed-off-by: John Lo <loj@cisco.com>
|
|
Fixes clang error: argument to 'sizeof' in 'memcpy' call is the same
pointer type 'unformat_input_t *' (aka 'struct _unformat_input_t *')
as the source; expected 'unformat_input_t' (aka 'struct
_unformat_input_t') or an explicit length.
Change-Id: If00303343b10fe1732e477549727a41445edf410
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Brian Brooks <brian.brooks@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
|
|
Change-Id: I8d8ecc80edb7665125ba625a3ce7b30d2dea88f0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them
up to date. The neighbor of an entry is probed if its time-stamp
is older than 1 minute. If the neighbor respond, its time-stamp
will be updated. If there is no response from a neighbor, its
entry will be deleted when the time-stamp of the entry become more
than 4 minutes old. Static neighbor entries are not probed nor
deleted.
Implemented CLI and API to enable and disable priodic scan of IPv4,
IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and
API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan
parameters can also be changed from their defaults via the CLI/API.
Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd
Signed-off-by: John Lo <loj@cisco.com>
|
|
Clean up default and vpp_api_test custom private api segment allocator
ring configurations.
Change-Id: I145b6d64ba0a6315b5ccb07909c8256eeb772146
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ic1e189c22e3d344d165e0eab05ccb667eef088a9
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
Change-Id: I2b418b9aefe298e4e6190cbe2e220a657f688cda
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
When creating an IPsec tunnel interface, allow a numeric
identifier to be set for use in the interface's name in
place of the dev instance. Default to using the dev instance
if no value is explicitly set.
When an IPsec tunnel is deleted, the interface is deleted
now instead of being kept in a pool of available hw
interfaces. Otherwise there was the possibility of
conflicting tx node names between deleted tunnels and
newly created ones.
Change-Id: Ic525466622a0dec38a845fa5871c084f6d9da380
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Add API support similar to VPP CLI "ip probe-neighbor" except API
call is asynch and will not wait, as the CLI does, for address
resolution of probed neighbor. The API client can use the APIs
want_ip4_arp_events or want_ip6_nd_events to get notified of the
desired address resolution event.
Change-Id: Ieab58abe75b5cc7f5185b3b91418b6362f8992d3
Signed-off-by: John Lo <loj@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Add bonding driver to support creation of bond interface which composes of
multiple slave interfaces. The slave interfaces could be physical interfaces,
or just any virtual interfaces. For example, memif interfaces.
The syntax to create a bond interface is
create bond mode <lacp | xor | acitve-backup | broadcast | round-robin>
To enslave an interface to the bond interface,
enslave interface TenGigabitEthernet6/0/0 to BondEthernet0
Please see src/plugins/lacp/lacp_doc.md for more examples and additional
options.
LACP is a control plane protocol which manages and monitors the status of
the slave interfaces. The protocol is part of 802.3ad standard. This patch
implements LACPv1. LACPv2 is not supported.
To enable LACP on the bond interface, specify "mode lacp" when the bond
interface is created. The syntax to enslave a slave interface is the same as
other bonding modes.
Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change mac_entry layout in l2_macs_event API message so the MAC
entry can be either add, delete or move where the sw_if_index of
an existing MAC entry changed. Also added a 8-bit flags field
in mac_entry for any future expansion.
Change-Id: I3bf9e1cf2556f2938202025a5d0772c2ce2fc99f
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I375bb0e663bc082d98a29fb101c653557ddc8f55
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
- support both pipe and uniform modes for all MPLS LSP
- all API programming for output-labels requires that the mode (and associated data) is specificed
- API changes in MPLS, BIER and IP are involved
- new DPO [sub] types for MPLS labels to handle the two modes.
Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1. When interface create encouners an error (see test below),
the same id cannot be used again.
This is due to hash_set is called too early in the function. After the
hash entry is set, there are different errors may cause the interface
create to be aborted. But we didn't remove the hash entry when error is
encountered. The fix is to move the hash_set call near the end which has
no more "goto error"
DBGvpp# create tap id 1 rx-ring-size 1021 tx-ring-size 1021
create tap id 1 rx-ring-size 1021 tx-ring-size 1021
create tap: ring size must be power of 2
DBGvpp# create tap id 1 rx-ring-size 1024 tx-ring-size 1024
create tap id 1 rx-ring-size 1024 tx-ring-size 1024
create tap: interface already exists
DBGvpp#
2. multiple issues exist with api_format.c with the below command
binary-api tap_create_v2 id 4 hw-addr 90:e2:ba:76:cf:2f rx-ring-size 1024 tx-ring-size 1024
- hw_addr is not taken due to the test for random mac is inverted
- id is an integer, not a string
- integer values were not converted to network format
Change-Id: I5a669d702a80ad158517df46f0ab089e4d0d692e
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change GRE tunnel to use the interface type where the same encap
node is used as output node for all GRE tunnels, instead of having
dedicated output and tx node for each tunnel. This allows for more
efficient tunnel creation and deletion at scale tested at 1000's
of GRE tunnels.
Add support for ERSPAN encap as another tunnel type, in addition
to the existing L3 and TEB types. The GRE ERSPAN encap supported
is type 2 thus GRE encap need to include sequence number and GRE-
ERSPAN tunnel can be created with user secified ERSPAN session ID.
The GRE tunnel lookup hash key is updated to inclue tunnel type
and session ID, in addition to SIP/DIP and FIB index.
Thus, GRE-ERSPAN tunnel can be created, with the appropriate
session ID, to be used as output interface for SPAN config to
send mirrored packets.
Change interface naming so that all GRE tunnels, irrespective of
tunnel type, uses "greN" where N is the instance number. Removed
interface reuse on tunnel creation and deletion to enable unfied
tunnel interface name.
Add support of user specified instance on GRE tunnel creation.
Thus, N in the "greN" interface name can optionally be specified
by user via CLI/API.
Optimize GRE tunnel encap DPO stacking to bypass load-balance DPO
node since packet output on GRE tunnel always belong to the same
flow after 5-tupple hash.
Change-Id: Ifa83915744a1a88045c998604777cc3583f4da52
Signed-off-by: John Lo <loj@cisco.com>
|
|
Also, output VSS info with names according to RFC6607 (3.5).
Change-Id: I27a383515aca1a74dced2363a0c407b2791e5f05
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
If one is not selected by the user, the next available id
will be allocated, thus maintaining backward compatibility.
Change-Id: I4691ed0638b8072f9cfa9f20b9fe4f981e708800
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
For implementation of MACIP ACLs enhancement (VPP-1088), an outbound
classifier-based ACL would be needed. There was an existing incomplete
code for outbound ACLs, it looked almost exact copy of input ACLs, minus
the various enhancements, trying to sync that code seemed error-prone
and cumbersome to maintain in the longer run.
This change refactors the input+output ACLs processing into a unified
routine (thus any changes will have effect on both), and also adds
the API to set the output interface ACL, with the same format
and semantics as the existing input one (except working on output
ACL of course).
WARNING: IP outbound ACL in L3 mode clobbers the ip.* fields
in the vnet_buffer_opaque_t, since the code is using l2_classify.*
The net_buffer (p0)->ip.save_rewrite_length is rescued into
l2_classify.pad.l2_len, and used to rewind the header in case of
drop, so that ipX_drop prints something sensible.
Change-Id: I62f814f1e3650e504474a3a5359edb8a0a8836ed
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I76fd655ecd9445299b94b3b5af10e7b1588584e4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icde296e956eb89ea3a17d547f04a833916ec6440
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
If I remember correctly, I added the interface name filter catalog to
avoid cluttering up the vat interface table with [unused] packet
generator interfaces. Since we no longer create pg interfaces we're
not planning to use, the filter catalog does more harm than
good. Every new interface name prefix would have had to be added to
the list, and folks wouldn't likely know they should do that...
Change-Id: I4067f8ba70ad13c8dc5ebaf21a23759a2cf2675e
Signed-off-by: Dave Barach <dave@barachs.net>
|