aboutsummaryrefslogtreecommitdiffstats
path: root/src/vat
AgeCommit message (Collapse)AuthorFilesLines
2018-07-13VPP-1338: fix ipsec api coverity warningsDave Barach1-8/+4
Remove useless unsigned comparisions: "(unsigned) value < 0", correct a couple of incorrect limit checks. Change-Id: I9606c4057df157f770d59535457cb9df1cfd1f35 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-10FIB path dump: fix next-hop-table ID for recursive routesNeale Ranns1-4/+6
Change-Id: I57b4ebca29c0b185770373e8878f89a9bd13b742 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-25MAP: Move MAP-E/T to a plugin.Ole Troan1-373/+0
Only remaining traces of MAP in the src/vnet is now in buffer.h. Awaiting a new buffer opaque API (hint, hint). Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-19Fixed bugs in SRv6 APIPablo Camarillo1-4/+12
Jira ticket VPP-1196 Jira ticket VPP-1081 Jira ticket VPP-1078 Jira ticket VPP-1217 Change-Id: Id7e85229cae1017acb0aa4ca63ced334e6dafb8d Signed-off-by: pcamaril <pcamaril@cisco.com> Signed-off-by: Pablo Camarillo <pcamaril@cisco.com> Signed-off-by: pcamaril <pcamaril@cisco.com> Signed-off-by: Michal Cmarada <michal.cmarada@pantheon.tech>
2018-06-15STATS: Separate socket for fd exchange.Ole Troan1-90/+2
stats { interval <no> socket-name <name> | default } Where the default socket is in /run/vpp/stats.sock Change-Id: Idd501b328c662804d4ccd58034b0ea6b8aa1f89a Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-13Stat segment / client: show run" works nowDave Barach2-10/+11
Seems to have minimal-to-zero performance consequences. Data appears accurate: result match the debug CLI output. Checked at low rates, 27 MPPS sprayed across two worker threads. Change-Id: I09ede5150b88a91547feeee448a2854997613004 Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-13vxlan:offload RX floweyal bari1-5/+106
ip4 vxlan cli/api (using flow infra) to create flows and enable them on different hardware (currently tested with i40e) to offload a vxlan tunnel onto hw: set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 to remove offload: set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 del TODO:ipv6 handling Change-Id: I70e61f792ef8e3f007d03d7df70e97ea4725b101 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-6/+6
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-08export counters in a memfd segmentDave Barach2-2/+170
also export per-node error counters directory entries implement object types Change-Id: I8ce8e0a754e1be9de895c44ed9be6533b4ecef0f Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-07DHCP Client DumpNeale Ranns1-9/+10
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps - add the DHCP client dump API - update VOM to refelct API changes - rename VOM class dhcp_config* dhcp_client* - the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-31Improve L2FIB delete entry handling and "show l2fib" CLI optionsJohn Lo1-2/+2
Improve deletion of L2FIB MAC entry using l2fib_add_del API. If sw_if_index param specified in th API is non-zero, check that its value match that of the MAC entry to proceed with deletion. Improve "show l2fib" CLI to allow display of all entries, learned entries only, or added ovia CLI/API entries only. For added entry, show "no" under the age column to indicate entry does not age. Change-Id: I0bd2582c2b6bac268e551e4f8ca6dab2be4400ad Signed-off-by: John Lo <loj@cisco.com>
2018-05-30vppinfra: explicitely state for signed types that they are signedDamjan Marion1-1/+1
This fixes some compilation warnings with clang on AArch64. Change-Id: Idb941944e3f199f483c80e143a9e5163a031c4aa Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-30Fix clang compilation on aarch64: sizeof operator error.Sirshak Das1-1/+1
Fixes clang error: argument to 'sizeof' in 'memcpy' call is the same pointer type 'unformat_input_t *' (aka 'struct _unformat_input_t *') as the source; expected 'unformat_input_t' (aka 'struct _unformat_input_t') or an explicit length. Change-Id: If00303343b10fe1732e477549727a41445edf410 Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Brian Brooks <brian.brooks@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2018-05-29af_packet: Add support for dump interfacesMohsin Kazmi1-0/+49
Change-Id: I8d8ecc80edb7665125ba625a3ce7b30d2dea88f0 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns1-3/+3
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-11Periodic scan and probe of IP neighbors to maintain neighbor poolsJohn Lo1-0/+77
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them up to date. The neighbor of an entry is probed if its time-stamp is older than 1 minute. If the neighbor respond, its time-stamp will be updated. If there is no response from a neighbor, its entry will be deleted when the time-stamp of the entry become more than 4 minutes old. Static neighbor entries are not probed nor deleted. Implemented CLI and API to enable and disable priodic scan of IPv4, IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan parameters can also be changed from their defaults via the CLI/API. Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd Signed-off-by: John Lo <loj@cisco.com>
2018-05-10Remove the historical memfd api segment bootstrapDave Barach1-164/+30
Clean up default and vpp_api_test custom private api segment allocator ring configurations. Change-Id: I145b6d64ba0a6315b5ccb07909c8256eeb772146 Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-04ipsec: allow null/null for crypto/integ algorithms pairRadu Nicolau1-4/+4
Change-Id: Ic1e189c22e3d344d165e0eab05ccb667eef088a9 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-04-27VAT for qos_record_enable_disable APIIgor Mikhailov (imichail)1-1/+73
Change-Id: I2b418b9aefe298e4e6190cbe2e220a657f688cda Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-04-19Allow an IPsec tunnel interface to be renumberedMatthew Smith1-1/+12
When creating an IPsec tunnel interface, allow a numeric identifier to be set for use in the interface's name in place of the dev instance. Default to using the dev instance if no value is explicitly set. When an IPsec tunnel is deleted, the interface is deleted now instead of being kept in a pool of available hw interfaces. Otherwise there was the possibility of conflicting tx node names between deleted tunnels and newly created ones. Change-Id: Ic525466622a0dec38a845fa5871c084f6d9da380 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-04-16Implement ip_probe_neighbor APIJohn Lo1-1/+56
Add API support similar to VPP CLI "ip probe-neighbor" except API call is asynch and will not wait, as the CLI does, for address resolution of probed neighbor. The API client can use the APIs want_ip4_arp_events or want_ip6_nd_events to get notified of the desired address resolution event. Change-Id: Ieab58abe75b5cc7f5185b3b91418b6362f8992d3 Signed-off-by: John Lo <loj@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-1/+1
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-1/+1
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-09Autodetect plugin pathDamjan Marion1-0/+1
dpdk plugin self-disables if there are no hugepages available Change-Id: Ib286e1a370deeb21248e6e961573ef9c68759b4c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-21bond: Add bonding driver and LACP protocolSteven1-1/+476
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>
2018-03-14Improve l2_macs_events API to provide MAC move informationJohn Lo1-2/+2
Change mac_entry layout in l2_macs_event API message so the MAC entry can be either add, delete or move where the sw_if_index of an existing MAC entry changed. Also added a 8-bit flags field in mac_entry for any future expansion. Change-Id: I3bf9e1cf2556f2938202025a5d0772c2ce2fc99f Signed-off-by: John Lo <loj@cisco.com>
2018-03-13Rationalize plugin symbol error reportingDave Barach1-2/+7
Change-Id: I64f2b2007f30fc1c6bd2990ba0d7ccbcd43cdb38 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-12SPAN: Add 'is_l2" flag to DETAILS response messages.Jon Loeliger1-2/+4
Change-Id: I375bb0e663bc082d98a29fb101c653557ddc8f55 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-03-09MPLS Unifom modeNeale Ranns1-8/+8
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-02tapv2: CLI and binary API fixesSteven1-7/+7
1. When interface create encouners an error (see test below), the same id cannot be used again. This is due to hash_set is called too early in the function. After the hash entry is set, there are different errors may cause the interface create to be aborted. But we didn't remove the hash entry when error is encountered. The fix is to move the hash_set call near the end which has no more "goto error" DBGvpp# create tap id 1 rx-ring-size 1021 tx-ring-size 1021 create tap id 1 rx-ring-size 1021 tx-ring-size 1021 create tap: ring size must be power of 2 DBGvpp# create tap id 1 rx-ring-size 1024 tx-ring-size 1024 create tap id 1 rx-ring-size 1024 tx-ring-size 1024 create tap: interface already exists DBGvpp# 2. multiple issues exist with api_format.c with the below command binary-api tap_create_v2 id 4 hw-addr 90:e2:ba:76:cf:2f rx-ring-size 1024 tx-ring-size 1024 - hw_addr is not taken due to the test for random mac is inverted - id is an integer, not a string - integer values were not converted to network format Change-Id: I5a669d702a80ad158517df46f0ab089e4d0d692e Signed-off-by: Steven <sluong@cisco.com>
2018-02-15Optimize GRE Tunnel and add support for ERSPAN encapJohn Lo1-11/+23
Change GRE tunnel to use the interface type where the same encap node is used as output node for all GRE tunnels, instead of having dedicated output and tx node for each tunnel. This allows for more efficient tunnel creation and deletion at scale tested at 1000's of GRE tunnels. Add support for ERSPAN encap as another tunnel type, in addition to the existing L3 and TEB types. The GRE ERSPAN encap supported is type 2 thus GRE encap need to include sequence number and GRE- ERSPAN tunnel can be created with user secified ERSPAN session ID. The GRE tunnel lookup hash key is updated to inclue tunnel type and session ID, in addition to SIP/DIP and FIB index. Thus, GRE-ERSPAN tunnel can be created, with the appropriate session ID, to be used as output interface for SPAN config to send mirrored packets. Change interface naming so that all GRE tunnels, irrespective of tunnel type, uses "greN" where N is the instance number. Removed interface reuse on tunnel creation and deletion to enable unfied tunnel interface name. Add support of user specified instance on GRE tunnel creation. Thus, N in the "greN" interface name can optionally be specified by user via CLI/API. Optimize GRE tunnel encap DPO stacking to bypass load-balance DPO node since packet output on GRE tunnel always belong to the same flow after 5-tupple hash. Change-Id: Ifa83915744a1a88045c998604777cc3583f4da52 Signed-off-by: John Lo <loj@cisco.com>
2018-02-12Fix the order of RFC2685 fields in the output.Igor Mikhailov (imichail)1-2/+2
Also, output VSS info with names according to RFC6607 (3.5). Change-Id: I27a383515aca1a74dced2363a0c407b2791e5f05 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-02-07VXLAN: Allow user to specify a custom vxlan tunnel instance id.Jon Loeliger1-4/+13
If one is not selected by the user, the next available id will be allocated, thus maintaining backward compatibility. Change-Id: I4691ed0638b8072f9cfa9f20b9fe4f981e708800 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-02-07classifier-based ACL: refactor + add output ACLAndrew Yourtchenko1-2/+60
For implementation of MACIP ACLs enhancement (VPP-1088), an outbound classifier-based ACL would be needed. There was an existing incomplete code for outbound ACLs, it looked almost exact copy of input ACLs, minus the various enhancements, trying to sync that code seemed error-prone and cumbersome to maintain in the longer run. This change refactors the input+output ACLs processing into a unified routine (thus any changes will have effect on both), and also adds the API to set the output interface ACL, with the same format and semantics as the existing input one (except working on output ACL of course). WARNING: IP outbound ACL in L3 mode clobbers the ip.* fields in the vnet_buffer_opaque_t, since the code is using l2_classify.* The net_buffer (p0)->ip.save_rewrite_length is rescued into l2_classify.pad.l2_len, and used to rewind the header in case of drop, so that ipX_drop prints something sensible. Change-Id: I62f814f1e3650e504474a3a5359edb8a0a8836ed Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-01-18tapv2: add option to set host-side default gwDamjan Marion1-1/+14
Change-Id: I76fd655ecd9445299b94b3b5af10e7b1588584e4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-15svm: refactor memfd and remove ssvm_ethFlorin Coras1-3/+2
Change-Id: Icde296e956eb89ea3a17d547f04a833916ec6440 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-11Remove vpp_api_test interface name filter catalogDave Barach1-66/+9
If I remember correctly, I added the interface name filter catalog to avoid cluttering up the vat interface table with [unused] packet generator interfaces. Since we no longer create pg interfaces we're not planning to use, the filter catalog does more harm than good. Every new interface name prefix would have had to be added to the list, and folks wouldn't likely know they should do that... Change-Id: I4067f8ba70ad13c8dc5ebaf21a23759a2cf2675e Signed-off-by: Dave Barach <dave@barachs.net>
2018-01-09api: refactor vlibmemoryFlorin Coras2-2/+2
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-05sock api: add infra for bootstrapping shm clientsFlorin Coras3-11/+65
- add function to sock client that bootstraps shm api - allow sock clients to request custom shm ring configs Change-Id: Iabc1dd4f0dc8bbf8ba24de37f4966339fcf86107 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-14tap_v2: include host-side parameters in the dump binary APIMilan Lenco1-3/+38
Change-Id: I097a738b96a304621520f1842dcac7dbf61a8e3f Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
2017-12-08Remove the unused 'create VRF if needed' API parametersNeale Ranns1-16/+0
Change-Id: I35e166feeb0ac1e0e570efe07cb5f4cbeb5b8670 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-12-08tapv2: multiple improvementsDamjan Marion1-20/+29
- change interface naming scheme - rework netlink code - add option to set link address, namespace Change-Id: Icf667babb3077a07617b0b87c45c957e345cb4d1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-02tap_v2: multiple improvementsDamjan Marion1-12/+49
- add support for assigning tap interface to the bridge - add support for assigning tap interface host side ip4 and ip6 address - host namespace can be specified as PID (pid:12345) or full path to file - automatically bring linux interface up Change-Id: I1cf7c3cad9a740e430cc1b9c2bb0aad0ba4cc8d8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-01virtio: fix coverity warningsSteven1-3/+1
Fix 3 coverity warnings 1. api_format.c: init net_ns = 0 and remove its corresponding vec_add and vec_free 2. netlink.c (reported in tap.c before the code was removed): resource leaked due to fd is not close 3. tap.c: subtract 1 for size when calling strncpy to accommodate the terminated NULL character Change-Id: Iff4e66604862f0c06dac227b8cfd48d3979e41a5 Signed-off-by: Steven <sluong@cisco.com>
2017-11-30virtio: fast TAP interfaces with vhost-net backendDamjan Marion1-0/+259
Change-Id: Ided667356d5c6fb9648eb34685aabd6b16a598b7 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Steven Luong <sluong@cisco.com>
2017-11-16Add Support of DHCP VSS Type 0 where VPN-ID is ASCIIJohn Lo1-32/+46
Enhence support of DHCP VSS (Virtual Subnet Selection) to include VSS type 0 where VSS info is a NVT (Network Virtual Terminal) ASCII VPN ID where the ASCII string MUST NOT be terminated with a zero byte. Existing code already support VSS type 1, where VSS information is a RFC 2685 VPN-ID of 7 bytes with 3 bytes OUI and 4 bytes VPN index, and VSS type 255 indicating global VPN. Change-Id: I54edbc447c89a2aacd1cc9fc72bd5ba386037608 Signed-off-by: John Lo <loj@cisco.com>
2017-11-10Break up vpe.apiNeale Ranns1-42/+0
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-10session: add app ns index to ns create apiFlorin Coras1-1/+35
Change-Id: I86bfe4e8b0a899cc54c9b37eeb5eec701d0baf3d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-11-09BIERNeale Ranns1-0/+158
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07vat: session_rules_dump missing network to host conversionSteven1-8/+10
Add clib_net_to_host conversion for integer fields greater than two bytes Change-Id: I187d8d1adbb1e534d58bd69bfbc1c58df5b8fc1e Signed-off-by: Steven <sluong@cisco.com>