summaryrefslogtreecommitdiffstats
path: root/src/vat
AgeCommit message (Collapse)AuthorFilesLines
2017-08-11Dedicated SW Interface EventNeale Ranns1-11/+6
Change-Id: I06a10a4291e61aec3f1396d2514ed6fe3901897a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-8/+9
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-07LISP: Map-server fallback featureFilip Tehlar1-0/+94
Change-Id: I1356296e1a85b5d532f45ba70572b2184ac3f6fb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-08-03Add support for API client to receive L2 MAC eventsJohn Lo1-7/+79
Added APIs want_l2_macs_events and l2_macs_event to allow an API client to receive notification events from VPP for MAC learned or aged in L2FIB. Only one API client is allowed for L2 MAC events. The want_l2_macs_events API allow caller to specify MAC learn limit, event scan delay and max number of MACs that can be included in a event message. These parameters should be choosen properly as to not have too many MAC events sent by VPP and overwhelm the API share memory. They can all be left as 0's so VPP will setup reasonable defaults which are: 1000 learn limit, 100 msec scan delay and 100 MACs per event message. If want_l2_macs_events is never called, VPP learning and aging should behave as before except that MAC entries provisioned by API or CLI will not be aged, even if it is not set as static_mac. These non static MACs, however, can be overwritten by MAC learning on a MAC move as a leared MAC. Only learned MACs are subject to aging. Change-Id: Ia3757a80cf8adb2811a089d2eafbd6439461285c Signed-off-by: John Lo <loj@cisco.com>
2017-08-02LISP: make TTL for map register messages configurableFilip Tehlar1-0/+95
Change-Id: I38e1c6a6b033e12ef3f4345a1deff73fa4adbea0 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-08-01P2P EthernetPavel Kotucek1-5/+12
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-08-01SPAN/API:enable L2 dumpEyal Bari1-1/+12
Change-Id: Icea1dff33aae35a85ae1a7ed1900a0abb3fe4b6b Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-24SPAN:add l2 mirrorEyal Bari1-1/+5
added span feature nodes for l2-input / l2-output Change-Id: Ib6e0ce60d0811901b6edd70209e6a4c4a35cd8ff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-05Add API support for LLDP config/interface setSteve Shin1-3/+92
Add API methods to configure LLDP and set interface to enable/disable. Also add port description TLV for LLDP. Change-Id: Ib959d488c2ab8a0069f143558871f41fcc43a5d3 Signed-off-by: Steve Shin <jonshin@cisco.com>
2017-06-25VPP crash on creating vxlan gpe interface. VPP-875Hongjun Ni1-11/+97
Change-Id: I6b19634ecb03860a7624d9408e09b52e95f47aef Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-06-16Fix vni/dp_table endianness for gpe iface addition (VPP-882)Florin Coras1-2/+2
Change-Id: I2b78dad740b67fc05b0e2cf9c180809bc0962cd5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-15Add VAT handlers for LISP-GPE APIFilip Tehlar1-0/+199
Change-Id: Id1139533c41cabef48394b5d79750608e0b74179 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-08LISP: add NSH supportFilip Tehlar1-8/+172
Change-Id: I971c110ed126f1a24a963f9d3b88cf8f8c308816 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-08P2P Ethernet - APIPavel Kotucek1-3/+104
API for P2P Ethernet feature Change-Id: Id0280f42b9ce2428262e79c4dc309595037cd10e Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-06-05LISP-GPE: return index of newly created fwd entry, VPP-868Filip Tehlar1-1/+33
Change-Id: I4fc45097cb994ab6a59503d9fcfb693d1c7ec442 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-30LISP: L2 ARP handlingFilip Tehlar1-0/+233
Change-Id: I1ec328cda73f7eaf7867cd8a2a17852ee0cd23f1 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-22vhost: migrate to use device infra for worker thread assignment, rx-mode.Steven1-62/+5
and add adaptive mode support to receive queue - Migrate vhost to use device infra which does the interface/queue to worker thread assignment. - Retire vhost thread CLI and corresponding code which assigns interface/queue to worker thread. set interface placement should be used instead to customize the interface/queue to worker thread assignment. - Retire vhost interrupt/polling option when creating vhost-user interface. Instead, set interface rx-mode should be used. - Add code in vnet_device_input_unassign_thread to change the node state to interrupt if the last polling interface has left the worker thread for the device of the corresponding interface/queue. - Add adaptive mode support. The node state is set to interrupt initially. When the scheduler detects a burst of traffic, it switches the input node to polling. Then we inform the device that we don't need interrupt notification. When the traffic subsides, the scheduler switches the input node back to interrupt. Then we immediately tell the driver that we want interrupt notification again. - Remove some duplicate code in vlib/main.c Change-Id: Id19bb1b9e50e6521c6464f470f5825c26924d3a8 Signed-off-by: Steven <sluong@cisco.com>
2017-05-22LISP-GPE: add dump call for VNIs in useFilip Tehlar1-0/+75
Change-Id: I394af7c1ac9fd0177ff5d298e4008245df54b436 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-20API: Cleaning up message naming that does not follow the conventionsOle Troan1-55/+59
is_address_reachable - Disabled so deleted cli_request - Renamed to cli vnet_summary_stats_reply - Renamed to vnet_get_summary_stats_reply bridge_domain_sw_if_details - Deleted, incorporated in main message l2_fib_table_entry - Renamed to l2_fib_table_details Change-Id: I93b7e8769a3ba7b4989b3c270270f575f386464f Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Marek Gradzki <mgradzki@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2017-05-15Fix vnet_interface_counters API definitionAloys Augustin1-31/+45
The api specification had u8 as data type, which caused the python binding to fail. Fixes VPP-642 Change-Id: I9ba97959740d44c8f4a12db9356d0d1bcd709a73 Signed-off-by: Aloys Augustin <aloys.augustin@polytechnique.org> Signed-off-by: Ole Troan <ot@cisco.com>
2017-05-09Fix remaining 32-bit compile issuesDamjan Marion1-5/+5
Change-Id: I9664214652229b663c3e3ba7406b4ede96bfb123 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-09API support for IPsec tunnel interface creationMatthew Smith1-0/+134
Change-Id: I8c9f886cb95e92adbe1c646844789ca0a6bb6140 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-05-09Add missing format_ip6_address() functions to plugin_api.Jon Loeliger2-0/+78
Specifically, the ACL plugin needed format_ip6_address() and the ip46 variant as well. Change-Id: Iec35b8acd4cab4bcbc73053dcca2ee91bd9c72cd Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-04-13LISP: make statistics thread safeFilip Tehlar1-0/+15
Change-Id: I056dc6246f79d887d69ad459a6b8b3092a099baa Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-07MPLS McastNeale Ranns1-56/+77
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-05L2FIB:add l2fib_flush_bd l2fib_flush_int apisEyal Bari1-2/+72
Change-Id: I0a6989c6963956f3e60e8c50835c57845fccef8c Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-05GRE over IPv6Ciara Loftus1-13/+65
Refactors the GRE node to work with both IPv4 and IPv6 transports. Note that this changes the binary configuration API to support both address families; each address uses the same memory for either address type and a flag to indicate which is in use. The CLI and VAT syntax remains unchanged; the code detects whether an IPv4 or an IPv6 address was given. Configuration examples: IPv4 CLI: create gre tunnel src 192.168.1.1 dst 192.168.1.2 IPv6 CLI: create gre tunnel src 2620:124:9000::1 dst 2620:124:9000::2 IPv4 VAT: gre_add_del_tunnel src 192.168.1.1 dst 192.168.1.2 IPv6 VAT: gre_add_del_tunnel src 2620:124:9000::1 dst 2620:124:9000::2 Change-Id: Ica8ee775dc101047fb8cd41617ddc8fafc2741b0 Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
2017-04-04BD/API:add bridge_domain_set_mac_age apiEyal Bari1-1/+76
Change-Id: Ic2d33b31ba88f6d9602a22439865637d98cf4a33 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-30Fix pid field endian in ARP/ND/DHCP event related API messagesJohn Lo1-9/+9
Make sure pid field in these API messages is stored in network order (it is also kept and used by VPP in network order). Change-Id: Id5d08e7a45b7e49d4b840a337458d99414d0b949 Signed-off-by: John Lo <loj@cisco.com>
2017-03-30Fix more "symbol XXX found in none of the libs" warningsDave Barach1-1/+0
Change-Id: I4467f26da5bdcfd76e5914e0124a83b659757947 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-22vhost: support interrupt modeSteven1-5/+62
vhost currently supports only polling mode. This patch is to add interrupt mode. When the interface is configured for interrupt mode, our input node does not get called unless there is a packet in the vring. If a particular CPU has one interface configured for polling mode and another in interrupt, the input node is set to polling for that CPU. This diffs also includes two crashes in vlib's dispatch_node. One is included in https://gerrit.fd.io/r/#/c/5516. The other crash is in the ASSERT. The ASSERT can become true when the caller of dispatch_node is in a loop. The first call converted the node to polling. The second call thereafter will hit the ASSERT. Change-Id: If17b6d48b20d7d8605c6a161459828637173cd32 Signed-off-by: Steven <sluong@cisco.com>
2017-03-22policer: fix byte ordering in policer_details msgMarek Gradzki1-2/+2
Change-Id: Id53131e8cd32bfd35739a7bd7cdbadf3a9f4d941 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-03-21LISP statisticsFilip Tehlar1-0/+208
Change-Id: I399cac46d279e020ba33459ef759d9d29d3ac716 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-03-15VXLAN:add hidden multicast interface checkEyal Bari1-4/+2
and some refactoring Change-Id: I99e3c5e782ce65cb9779ccc3a9a3151ef1429e07 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-10LISP: fix Proxy-ETR show command, VPP-660Filip Tehlar1-0/+146
Change-Id: I8b7dc3bf631bd228db23679534e04b8af7ac4ec7 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-03-09IMplementation for option to not create a FIB table entry when adding a ↵Neale Ranns1-0/+4
neighbor entry Change-Id: I952039e101031ee6a06e63f4c73d8eb359423e1a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-08Proxy ND (RFC4389 - or a sub-set thereof). This allows the 'emulation' of ↵Neale Ranns1-0/+109
bridging. That is hosts in one sub-net reachable via differenet interfaces. Introducate a new API command: ip6 nd proxy <host-address> <interface> this indicates 2 things; 1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route. 2) NS requests sent to <host-address> will be responeded to (i.e. proxied). Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07Missing plugin binary API command fns found after brief searchDave Barach2-2/+1
Create hash tables before loading plugins. Previous init sequence wiped out most if not all of them. Change-Id: I5dd628895f68f740d525951511a9fef1822d39da Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-07DHCP Multiple Servers (VPP-602, VPP-605)Neale Ranns1-14/+42
Multiple DHCP (4 and/or 6) servers can be added and removed through multiple calls to the 'set dhcp server' API. All 4/6/ discover/solicit messages will then be replicated to all servers in the list. The expectation is that the servers/system is configured in such a way that this is viable. If VSS information is providied for the clinet VRF which also has multiple servers configured, then the same VSS information is sent to each server. Likewise the source address of packets sent to from VPP to each server is the same. Change-Id: I3287cb084c84b3f612b78bc69cfcb5b9c1f8934d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07Fix endian issue in ARP Event ReplyWojciech Dec1-2/+4
ARP Event reply sw_if_index was getting passed in host byte order. Change-Id: Ifae8673906ac2c4233f146786a3d02c38280809b Signed-off-by: Wojciech Dec <wdec@cisco.com>
2017-03-04Evolving SRv6 (Segment Routing for IPv6)Pablo Camarillo1-286/+71
Implements: 1.- SR Policies with several (weighted) SID lists 2.- Binding SID 3.- SR LocalSIDs with support for the following functions - End - End.X - End.DX6 - End.DX4 - End.DX2 - End.DT6 - End.DT2 - End.B6 - End.B6.Encaps 4.- SR Steering policies (to steer a traffic through an SR Policy) - Support for IPv6 traffic (IPv6 Encapsulation / SRH insertion) - Support for IPv4 traffic (IPv6 Encapsulation) - Support for L2 traffic (T.Insert / T.Encaps) 5.- Doxygen documentation 6.- Framework (APIs) to allow the definition of new SR LocalSID behaviors by means of plugins 7.- Sample SRv6 LocalSID plugin Change-Id: I2de3d126699d4f11f54c0f7f3b71420ea41fd389 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-03-03Implement a loopback instance allocation scheme.Jon Loeliger1-6/+53
To support creating loopback interfaces with a specific instance number, a new CREATE_LOOPBACK_INSTANCE API call with flag is_specified and value user_instance is introduced. Presumably the existing CREATE_LOOPBACK API message will be obsoleted and revmoved. The VAT cli commands can now mention and format the new field as 'instance %d' data. If no instance number is named, the old call CREATE_LOOPBACK is used to maintain backward compatibility. However, if the instance is named, the new CREATE_LOOPBACK_INSTANCE message will be used. Both the dynamically allocated and user-requested instance number are tracked in a bitvector. If is_specified is 0, the next free instance will be used.. A request for a specific instance number will be granted if it is available. On error, the value ~0 is returned. Change-Id: I849815563a5da736dcd6bccd262ef49b963f6643 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-03-02Clean up binary api message handler registration issuesDave Barach1-7/+36
Removed a fair number of "BUG" message handlers, due to conflicts with actual message handlers in api_format.c. Vpp itself had no business receiving certain messages, up to the point where we started building in relevant code from vpp_api_test. Eliminated all but one duplicate registration complaint. That one needs attention from the vxlan team since the duplicated handlers have diverged. Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-02Remove the unused VRF ID parameter from the IP neighbour Add/Del APINeale Ranns1-4/+0
Change-Id: Icf0d72f6af1f98c86f78e586c354515ac69804aa Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion1-320/+0
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-27Add GPE CLI/API for setting encap modeFilip Tehlar1-0/+114
Change-Id: Id89e23fb5d275572b2356c073dfa0f55719e1a76 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-23Fix vpp built-in version of api_unformat_sw_if_index(...)Dave Barach1-16/+34
Change-Id: I103fe19a1ecbaf3746ec6b957fa1010458cc9fae Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22Clean up "binary-api" help string, arg parse bugsDave Barach1-0/+2
Change-Id: I12311be8ebd376b8aeac25364d010d70a85c7874 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-21Add Overlay Network Engine APIFilip Tehlar1-209/+291
Change-Id: I6b5984df176688f0722a2888e73f05d8ed8b9310 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-21dhcp: multiple additionsNeale Ranns1-89/+84
DHCP additions: 1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default. 2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default 3) Remove the version 2 API since it's now the same as version 1. 4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API) 5) DHCP proxy dump via API Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17 Signed-off-by: Neale Ranns <nranns@cisco.com>