summaryrefslogtreecommitdiffstats
path: root/src/vat
AgeCommit message (Collapse)AuthorFilesLines
2019-09-11bonding: API cleanupJakub Grajciar1-6/+6
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Idbba4ab6a412b75338e3149e51476693f0862f16 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-11build: fix running error with vmxnet3_test_plugin.sojialv011-10/+4
vpp_api_test load vmxnet3_test_plugin.so error: "load_one_plugin:42:/vpp/lib/vpp_api_test_plugins/vmxnet3_test_plugin.so: undefined symbol: unformat_vlib_pci_addr" Type: fix Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com> Change-Id: I444aa05d0bc3c4f4f25082388243f1adb305dd0a
2019-09-06bonding: add weight support for active-backup modeSteven Luong1-6/+56
Not all interfaces have the same characteristics within the bonding group. For active-backup mode, we should do our best to select the slave that performs the best as the primary slave. We already did that by preferring the slave that is local numa. Sometimes, this is not enough. For example, when all are local numas, the selection is arbitrary. Some slave interfaces may have higher speed or better qos than the others. But this is hard to infer. One rule does not fit all. So we let the operator to optionally specify the weight for each slave interface. Our primary slave selection rule is now 1. biggest weight 2. is local numa 3. current primary slave (to avoid churn) 4. lowest sw_if_index (for deterministic behavior) This selection rule only applies to active-backup mode which only one slave is used for forwarding traffic until it becomes unreachable. At that time, the next "best" slave candidate is automatically promoted. The slaves are sorted according to the preference rule when they are up. So there is no need to find the next best candidate when the primary slave goes down. Another good thing about this rule is when the down slave comes back up, it is selected as the primary slave again unless there is indeed a "better" slave than this down slave that were added during that period. To set the weight for the slave interface, do this after the interface is enslaved set interface bond <interface-name> weight <value> Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
2019-09-03api: enforce vla is last and fixed string typeOle Troan1-43/+11
Enforce that variable length fields are the last element of API messages. Add a 'fixed' version of string type, since dealing with multiple variable length strings turned out too painful for the C language bindings. The string type is now: { string name[64]; // NUL terminated C-string. Essentially decays to u8 name[64] string name[]; // Variable length string with embedded len field (vl_api_string_t) }; The latter notation could be made available to other types as well. e.g. { vl_api_address_t addresses[]; } instead of { u32 n_addr; vl_api_address_t addresses[n_addr]; }; Type: fix Change-Id: I18fa17ef47227633752ab50453e8d20a652a9f9b Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-27api: revert use string type for strings in memclnt.apiOle Troan1-1/+1
This reverts commit 2959d42feb576c0e00c28c4e27658b25f6c783e9. Lacks client side fixes. Type: fix Change-Id: Ib94b18e74325cede41ed1733e57896f17a952526 Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-27api: use string type for strings in memclnt.apiOle Troan1-1/+1
Explicitly using string type in API allows for autogenerating tools to print strings instead of hex-dumping byte strings. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I573962d6b34d5d10aab9dc6a5fdf101c9b12a6a6 Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-22dns: make the dns name resolver a pluginDave Barach1-242/+0
Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I823c2cd307a4613653a2d20f564dda062d4da31b
2019-08-20api: Cleanup APIs interface.apiJakub Grajciar2-45/+57
Use of consistent API types for interface.api Type: fix Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-07-31devices interface tests: vhosst GSO supportSteven Luong1-2/+10
Add gso option in create vhost interface to support gso and checksum offload. Tested with the following startup options in qemu: csum=on,gso=on,guest_csum=on,guest_tso4=on,guest_tso6=on,guest_ufo=on, host_tso4=on,host_tso6=on,host_ufo=on Type: feature Change-Id: I9ba1ee33677a694c4a0dfe66e745b098995902b8 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-07-28pg: add GSO supportMohsin Kazmi1-2/+15
Type: feature Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-24qos: QoS dump APIsNeale Ranns1-2/+2
Type: feature Change-Id: I514b40026986f3828c8727453456b20a0a45f3af Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-19bonding: add support for numa-only in lacp modeZhiyong Yang1-0/+4
If numa-only is set, Only slaves on local numa node transmit pkts if have at least one, otherwise the bond interface works as usual. CLI change: create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}] [hw-addr <mac-address>] [id <if-id>] The new member "u8 numa_only;" is also added to bond_create_if_args_t. Type: feature Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-07-19vat: remove #if BUILTIN from vat_main_t definitionDave Barach1-2/+0
Otherwise, vat plugins will be confused about the offset from &vat_main of the vlib_main_t * pointer, leading to NULL pointer crashes. Type: fix Change-Id: I7298b7ce8c000217ed7fdd2e97a3cbf978464377 Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-16api: enable binary API event logging in vatDave Barach2-1/+106
Cleaned up a few instances of side-bet elog_string hash table usage. Elog_string handles that problem itself. Add cli commands to vat to initialize, enable/disable, and save an event log. Event logging at the same time in both vpp and vat yields a pair of event logs which can be merged by the "test_elog" tool. Type: refactor Change-Id: I8d6a72206f2309c967ea1630077fba31aef47f93 Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-03misc: fix coverity warningsDave Barach1-2/+2
Type: fix Ticket: VPP-1649 Change-Id: I93a393eca80065c379035478500e75e855f39b12 Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-03vat: Fix the incrementing IPv6 addressNeale Ranns1-2/+2
Type: fix Change-Id: Ie085713f45672e112993638e01cdb325f451020a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-26api: refactor format_vl_api_prefix_t return keysPaul Vinciguerra1-8/+6
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length', but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'. Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'. Type: refactor Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-26api: Remove the inlines file and replace with library functionsNeale Ranns1-1/+0
using inlines exposes the users to the internal data types used by VPP, namely vec.h. This file does not compile with a C++ compiler. Type: feature Change-Id: I1544fdd9eae998309f865df61df78571bdb96903 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-20vat: vec_free/errmsh copy paste errorOle Troan1-2/+1
Change-Id: I808ae95666b82f04979b57cfe237a8f83bb68264 Type: fix Fixes: 283cd2e9af Signed-off-by: Ole Troan <ot@cisco.com>
2019-06-20tap: add support to configure tap interface host MTU sizeMohsin Kazmi1-1/+19
This patch adds support to configure host mtu size using api, cli or startup.conf. Type: feature Change-Id: I8ab087d82dbe7dedc498825c1a3ea3fcb2cce030 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-06-19l2: BD ARP termination entry API updateNeale Ranns1-26/+11
Type: refactor Change-Id: I492b6e88acadf0ab0e4d7b1c0c5d1cab84c1726f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-179/+0
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-736/+634
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18api: string type to convert to vectorOle Troan1-13/+15
Previous use of strndup() required user to remember to call free(). Now return a vector pointing directly to the API message string. Of course user must remember to copy the string out if lifetime is longer than API message lifetime. Change-Id: Ib5e2b3d52d258e1a42ea9ea9a9e04abbe360e2bf Type: fix Signed-off-by: Ole Troan <ot@cisco.com>
2019-06-12infra: fix minor memory leak in "api trace..."Dave Barach1-0/+4
Build api trace message print fns into the built-in copy of api_format.c Optimize memory allocator behavior when the api trace wraps. Type: Fix Change-Id: If799d8784a459f981fc9ee3a3ca03d3f63b2bcd0 Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-07build: add -Wall and -fno-common, fix reported issuesBenoît Ganne3-28/+17
Type: refactor Change-Id: I8489ccd54411c2aa9355439c5641dc31012c64a2 Signed-off-by: Benoît Ganne <bganne@cisco.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-06-07ipsec: remove the set_key APINeale Ranns1-131/+0
there's no use case to just change the key of an SA. instead the SA should be renegociated and the new SA applied to the existing SPD entry or tunnel. the set_key functions were untested. Type: refactor Change-Id: Ib096eebaafb20be7b5501ece5a24aea038373002 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-28Punt: socket register for exception dispatched/punted packets based on reasonNeale Ranns1-4/+7
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions - move the punt nodes into punt_node.c - improve tests (test that the correct packets are punted to the registered socket) Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-27virtio: Add gso support for native virtio driverMohsin Kazmi1-26/+4
Change-Id: I7b735f5a540e8c278bac88245acb3f8c041c49c0 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-05-24Remove historical ip4 icmp OAM codeDave Barach1-56/+0
Add a registration overwritten warning to ip4_icmp_register_type(...) Change-Id: I6c2aabdb979b54ec49e827225acc74559ac4caab Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-14VPP-1649: fix coverity warning in api_format.cDave Barach1-1/+2
Change-Id: Idc22377ca705a45300faaf8acbc3cae5f10e1c92 Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-06Fix VPP-1487 DHCP client does not support option 6-domain serverjackiechen19851-7/+16
Change-Id: I36ad1ef2a53af3d3f3a6348bc189b17e9e4e21bd Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2019-05-01virtio: remove configurable queue size supportMohsin Kazmi1-2/+0
Native virtio device through legacy driver can't support configurable queue size. Change-Id: I76c446a071bef8a469873010325d830586aa84bd Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-04-18GRE: API updateNeale Ranns1-102/+63
Change-Id: I5010cd34123c6498230dedac6ba8dd774a1085f9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-02IPSEC: tunnel scaling - don't stack the inbould SANeale Ranns1-46/+127
Change-Id: I0b47590400aebea09aa1b27de753be638e1ba870 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29IPSEC-GRE: fixes and API update to common types.Neale Ranns1-28/+42
Change-Id: Icdcbac7453baa837a9c0c4a2401dff4a6aa6cba0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion1-2/+1
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28vat:ignore SIGWINCH signalezkexma1-0/+1
vpp/src/vat/main.c When change the window size,the vat will get the SIGWINCH signal and then exit. It is not a exit action,so we can ignore it. Change-Id: If796762216910e23cace09406d413331f505d990 Signed-off-by: ezkexma <maqi.z.ke@ericsson.com>
2019-03-21ipsec: add ipv6 support for ipsec tunnel interfaceKingwel Xie1-6/+8
Change-Id: I6a76907dc7bed2a81282b63669bea2219d6903c9 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2019-03-15Revert "API: Cleanup APIs interface.api"Ole Trøan2-46/+35
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd. Allow time for CSIT to accommodate. Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2 Signed-off-by: ot@cisco.com
2019-03-15API: Cleanup APIs interface.apiJakub Grajciar2-35/+46
Use of consistent API types for interface.api Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-02-25IKEv2 to pluginNeale Ranns1-708/+0
for easy integration with ptoducts running their own Ike stack. Without the VPP IKE plugin loaded, the product is free to handle IKE packets as it pleases. Change-Id: Id0839f4d58b797f4c2da0382eb499fc08b05f66f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-18IPSEC: move SA counters into the stats segmentNeale Ranns1-5/+2
1) stats are accessed via the stat segment which is more condusive to monitoring 2) stats are accurate in the presence of multiple threads. There's no guarantee that an SA is access from only one worker. Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-07IPSEC: no second lookup after tunnel encapNeale Ranns1-55/+59
in the same maaner as with other tunnel tyeps we use the FIB to cache and track the destination used to reach the tunnel endpoint. Post encap we can then ship the packet straight to this adjacency and thus elide the costly second lookup. - SA add and del function so they can be used both directly from the API and for tunnels. - API change for the SA dump to use the SA type - ipsec_key_t type for convenience (copying, [un]formating) - no matching tunnel counters in ipsec-if-input Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-05sock api: allow to start client with no rx_threadTomasz Kulasek1-1/+1
Change-Id: Ia30ff1e62304e65f27497ce05f8e40631c06d69e Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
2019-02-05IPSEC: SPD counters in the stats sgementNeale Ranns1-1/+0
- return the stats_index of each SPD in the create API call - no ip_any in the API as this creates 2 SPD entries. client must add both v4 and v6 explicitly - only one pool of SPD entries (rhter than one per-SPD) to support this - no packets/bytes in the dump API. Polling the stats segment is much more efficient (if the SA lifetime is based on packet/bytes) - emit the policy index in the packet trace and CLI commands. Change-Id: I7eaf52c9d0495fa24450facf55229941279b8569 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-31IPSEC: API modernisationNeale Ranns1-225/+144
- use enums to enumerate the algoritms and protocols that are supported - use address_t types to simplify encode/deocde - use typedefs of entry objects to get consistency between add/del API and dump Change-Id: I7e7c58c06a150e2439633ba9dca58bc1049677ee Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-30Use IP and MAC API types for neighborsNeale Ranns1-129/+71
use address_t and mac_address_t for IPv6 and ARP entries and all other API calls in ip.api aprat from the route ones, that will follow in a separate commit Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-25deprecate tapcliDamjan Marion1-360/+0
Change-Id: I82dceaa27a7b0c96de077cf283e4f64aa426f271 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-22virtio: Add api support in vatMohsin Kazmi1-0/+299
Change-Id: I46ec5ba03d61c1fe0aba92f649f43746b5292cc3 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>