summaryrefslogtreecommitdiffstats
path: root/src/vat
AgeCommit message (Collapse)AuthorFilesLines
2019-06-20tap: add support to configure tap interface host MTU sizeMohsin Kazmi1-1/+19
This patch adds support to configure host mtu size using api, cli or startup.conf. Type: feature Change-Id: I8ab087d82dbe7dedc498825c1a3ea3fcb2cce030 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-06-19l2: BD ARP termination entry API updateNeale Ranns1-26/+11
Type: refactor Change-Id: I492b6e88acadf0ab0e4d7b1c0c5d1cab84c1726f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-179/+0
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-736/+634
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18api: string type to convert to vectorOle Troan1-13/+15
Previous use of strndup() required user to remember to call free(). Now return a vector pointing directly to the API message string. Of course user must remember to copy the string out if lifetime is longer than API message lifetime. Change-Id: Ib5e2b3d52d258e1a42ea9ea9a9e04abbe360e2bf Type: fix Signed-off-by: Ole Troan <ot@cisco.com>
2019-06-12infra: fix minor memory leak in "api trace..."Dave Barach1-0/+4
Build api trace message print fns into the built-in copy of api_format.c Optimize memory allocator behavior when the api trace wraps. Type: Fix Change-Id: If799d8784a459f981fc9ee3a3ca03d3f63b2bcd0 Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-07build: add -Wall and -fno-common, fix reported issuesBenoît Ganne3-28/+17
Type: refactor Change-Id: I8489ccd54411c2aa9355439c5641dc31012c64a2 Signed-off-by: Benoît Ganne <bganne@cisco.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-06-07ipsec: remove the set_key APINeale Ranns1-131/+0
there's no use case to just change the key of an SA. instead the SA should be renegociated and the new SA applied to the existing SPD entry or tunnel. the set_key functions were untested. Type: refactor Change-Id: Ib096eebaafb20be7b5501ece5a24aea038373002 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-28Punt: socket register for exception dispatched/punted packets based on reasonNeale Ranns1-4/+7
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions - move the punt nodes into punt_node.c - improve tests (test that the correct packets are punted to the registered socket) Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-27virtio: Add gso support for native virtio driverMohsin Kazmi1-26/+4
Change-Id: I7b735f5a540e8c278bac88245acb3f8c041c49c0 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-05-24Remove historical ip4 icmp OAM codeDave Barach1-56/+0
Add a registration overwritten warning to ip4_icmp_register_type(...) Change-Id: I6c2aabdb979b54ec49e827225acc74559ac4caab Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-14VPP-1649: fix coverity warning in api_format.cDave Barach1-1/+2
Change-Id: Idc22377ca705a45300faaf8acbc3cae5f10e1c92 Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-06Fix VPP-1487 DHCP client does not support option 6-domain serverjackiechen19851-7/+16
Change-Id: I36ad1ef2a53af3d3f3a6348bc189b17e9e4e21bd Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2019-05-01virtio: remove configurable queue size supportMohsin Kazmi1-2/+0
Native virtio device through legacy driver can't support configurable queue size. Change-Id: I76c446a071bef8a469873010325d830586aa84bd Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-04-18GRE: API updateNeale Ranns1-102/+63
Change-Id: I5010cd34123c6498230dedac6ba8dd774a1085f9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-02IPSEC: tunnel scaling - don't stack the inbould SANeale Ranns1-46/+127
Change-Id: I0b47590400aebea09aa1b27de753be638e1ba870 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29IPSEC-GRE: fixes and API update to common types.Neale Ranns1-28/+42
Change-Id: Icdcbac7453baa837a9c0c4a2401dff4a6aa6cba0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion1-2/+1
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28vat:ignore SIGWINCH signalezkexma1-0/+1
vpp/src/vat/main.c When change the window size,the vat will get the SIGWINCH signal and then exit. It is not a exit action,so we can ignore it. Change-Id: If796762216910e23cace09406d413331f505d990 Signed-off-by: ezkexma <maqi.z.ke@ericsson.com>
2019-03-21ipsec: add ipv6 support for ipsec tunnel interfaceKingwel Xie1-6/+8
Change-Id: I6a76907dc7bed2a81282b63669bea2219d6903c9 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2019-03-15Revert "API: Cleanup APIs interface.api"Ole Trøan2-46/+35
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd. Allow time for CSIT to accommodate. Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2 Signed-off-by: ot@cisco.com
2019-03-15API: Cleanup APIs interface.apiJakub Grajciar2-35/+46
Use of consistent API types for interface.api Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-02-25IKEv2 to pluginNeale Ranns1-708/+0
for easy integration with ptoducts running their own Ike stack. Without the VPP IKE plugin loaded, the product is free to handle IKE packets as it pleases. Change-Id: Id0839f4d58b797f4c2da0382eb499fc08b05f66f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-18IPSEC: move SA counters into the stats segmentNeale Ranns1-5/+2
1) stats are accessed via the stat segment which is more condusive to monitoring 2) stats are accurate in the presence of multiple threads. There's no guarantee that an SA is access from only one worker. Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-07IPSEC: no second lookup after tunnel encapNeale Ranns1-55/+59
in the same maaner as with other tunnel tyeps we use the FIB to cache and track the destination used to reach the tunnel endpoint. Post encap we can then ship the packet straight to this adjacency and thus elide the costly second lookup. - SA add and del function so they can be used both directly from the API and for tunnels. - API change for the SA dump to use the SA type - ipsec_key_t type for convenience (copying, [un]formating) - no matching tunnel counters in ipsec-if-input Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-05sock api: allow to start client with no rx_threadTomasz Kulasek1-1/+1
Change-Id: Ia30ff1e62304e65f27497ce05f8e40631c06d69e Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
2019-02-05IPSEC: SPD counters in the stats sgementNeale Ranns1-1/+0
- return the stats_index of each SPD in the create API call - no ip_any in the API as this creates 2 SPD entries. client must add both v4 and v6 explicitly - only one pool of SPD entries (rhter than one per-SPD) to support this - no packets/bytes in the dump API. Polling the stats segment is much more efficient (if the SA lifetime is based on packet/bytes) - emit the policy index in the packet trace and CLI commands. Change-Id: I7eaf52c9d0495fa24450facf55229941279b8569 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-31IPSEC: API modernisationNeale Ranns1-225/+144
- use enums to enumerate the algoritms and protocols that are supported - use address_t types to simplify encode/deocde - use typedefs of entry objects to get consistency between add/del API and dump Change-Id: I7e7c58c06a150e2439633ba9dca58bc1049677ee Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-30Use IP and MAC API types for neighborsNeale Ranns1-129/+71
use address_t and mac_address_t for IPv6 and ARP entries and all other API calls in ip.api aprat from the route ones, that will follow in a separate commit Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-25deprecate tapcliDamjan Marion1-360/+0
Change-Id: I82dceaa27a7b0c96de077cf283e4f64aa426f271 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-22virtio: Add api support in vatMohsin Kazmi1-0/+299
Change-Id: I46ec5ba03d61c1fe0aba92f649f43746b5292cc3 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-20Rework of debian packagingDamjan Marion1-0/+34
Change-Id: Ifede85d3af36f3ee6c6f8f92dcf5db0ed8f1bfeb Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-01-13bonding: support custom interface IDsAlexander Chernavin1-1/+6
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2019-01-07tapv2: add "tap_flags" field to the TAPv2 interface APIAndrew Yourtchenko1-2/+3
Change-Id: I26f99d95f52c9fe107d17dcbbf5c6185523beade Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-01-07L2 BD API to flush all IP-MAC entries in the specified BDJohn Lo1-1/+38
Implement API/CLI to clear IP-MAC tables used for ARP-termination in the specified bridge domain. The CLI to flush MAC IP tables for a BD is: set bridge-domain arp entry <bd-id> del-all The API added is bd_ip_mac_flush. Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8 Signed-off-by: John Lo <loj@cisco.com>
2018-12-22bapi/vat: fix socket transport for vatFlorin Coras1-2/+8
Change-Id: I8e39df129f80c8d3d73181fc5d3ac60ae382a6b6 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-12-18PAPI: Add MACAddress object wrapper for vl_api_mac_address_tOle Troan1-9/+1
Change the definition of vl_api_mac_address_t to an aliased type. Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134 Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-17stats: Deprecate old stats frameworkOle Troan1-536/+1
Change-Id: Iecdf0e5767115ef0570e9ea7212dc4644cf4afbd Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-17String type: Not include \0 in show_versionOle Troan1-11/+23
The string type does not include the \0 in strings. Change-Id: I869f438b84880df40a018e43b4510194d84ce0fe Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-14String type: Fix off by one errorOle Troan1-1/+1
String is not sent nul terminated across API. The hardest two problems in computer science is cache invalidation naming and off by one errors. Change-Id: I36f1952ca955cb2d9dfb4c8120ec48c50ba17991 Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-13API: Use string type instead of u8.Ole Troan1-13/+33
The new string type is modelled after string in proto3. It is always variable length. Change-Id: I64884067e28a80072c8dac31b7c7c82d6e306051 Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Michal Cmarada <mcmarada@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-11Fix vat dependenciesjuraj.linkes1-0/+2
Needed for arm machines in CI. Change-Id: Ib16a8b63e145116c7cb22376243e9026d9545c8a Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2018-12-07VPP-1506: dump local punts and registered punt socketsPavel Kotucek1-9/+9
Change-Id: If7835e9b80ec9402404bfc8d271eb11a10ef992b Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2018-12-04MPLS: buffer over-run with incorrectly init'd vector. fix VAT dumpNeale Ranns1-2/+2
Change-Id: Ifdbb4c4cffd90c4ec8b39513d284ebf7be39eca5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-12IPv6: Make link-local configurable per-interface (VPP-1446)Juraj Sloboda1-54/+0
Remove old nonfunctional code for setting link-local addresses. Use common API for setting all IPv6 addresses. Change-Id: I562329df86341f81ef2441510a9eefbbf710f6e0 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com> Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-11-06BD ARP entry use common API typesNeale Ranns1-15/+9
Change-Id: I29f20dbaf2c2d735faff297cee552ed648f6f61b Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-05Genric API types format/unformat support for VAT and custom dumpNeale Ranns3-0/+13
Change-Id: I8bc3a991f0ede0605d78b51ba609fbe5889513f2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-23c11 safe string handling supportDave Barach5-51/+51
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-17fix ip6 prefix check for tap_v2Michal Cmarada1-1/+1
Change-Id: Ifbb1393fc3c50c140c09e8baedcd4a92189ba56e Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
2018-10-04Fix handling of mpls_tunnel_add_del APIJohn Lo1-14/+41
Handles next_hop_weight, next_hop_preference and next_hop_table_id properly in vl_api_mpls_tunnel_add_del_t_handler(). Also updated vpp_api_test and custom_dump handling of related APIs. Change-Id: I89e211bfa3b9d8ead396b24b3c46b7c7f6511f44 Signed-off-by: John Lo <loj@cisco.com>