summaryrefslogtreecommitdiffstats
path: root/src/vlib/node.h
AgeCommit message (Collapse)AuthorFilesLines
2023-11-03vppinfra: refactor interrupt codeDamjan Marion1-1/+0
Type: improvement Change-Id: Ie6987736faf7d8a641762e276775da8ee0c03ea4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-07-25vlib: interrupt mode support for pre-input nodesDamjan Marion1-2/+3
Type: improvement Change-Id: Ic6e60597d2be63e3a0ae4399a81dbbd72392f30d Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-10-12misc: fix issues reported by clang-15Damjan Marion1-1/+2
Type: improvement Change-Id: I3fbbda0378b72843ecd39a7e8592dedc9757793a Signed-off-by: Damjan Marion <dmarion@me.com>
2022-09-09vlib: don't leak node frames on reforkDmitry Valter1-0/+3
Free node frames in worker mains on refork. Otherwise these frames are never returned to free pool and it causes massive memory leaks if performed under traffic load Type: fix Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru> Change-Id: I15cbf024a3f4b4082445fd5e5aaa10bfcf77f363
2022-03-30vppinfra: vector allocator reworkDamjan Marion1-1/+1
- support of in-place growth of vectors (if there is available space next to existing alloc) - drops the need for alloc_aligned_at_offset from memory allocator, which allows easier swap to different memory allocator and reduces malloc overhead - rework of pool and vec macros to inline functions to improve debuggability - fix alignment - in many cases macros were not using native alignment of the particular datatype. Explicitly setting alignment with XXX_aligned() versions of the macro is not needed anymore in > 99% of cases - fix ASAN usage - avoid use of vector of voids, this was root cause of several bugs found in vec_* and pool_* function where sizeof() was used on voids instead of real vector data type - introduce minimal alignment which is currently 8 bytes, vectors will be always aligned at least to that value (underlay allocator actually always provide 16-byte aligned allocs) Type: improvement Change-Id: I20f4b081bb13bbf7bc0ace85cc4e301787f12fdf Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-03-29vlib: fix unaligned runtime_dataDmitry Valter1-0/+2
Align runtime_data to 8 bytes to avoid alignment issues with any pointers in runtime_data located structures. Type: fix Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru> Change-Id: I9cb1b73595e654a4b15c45f87b43fa6cfbcb6e51
2022-03-23vlib: avoid use of vector of voidsDamjan Marion1-1/+1
Type: fix Change-Id: I76e28854db8a1e9134c816c0c5d81b031dc4e27d Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-03-11vlib: remoove unused fieldDamjan Marion1-2/+0
Type: refactor Change-Id: Ieb7a595e40d801af5349c83b128fa92c7698a346 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-18vlib: allow bigger scalar data sizeDamjan Marion1-1/+2
Type: improvement Change-Id: I1031c6ce80d90814edda7b52b11039874b95714f Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-12-24vlib: introduce vlib frame aux dataDamjan Marion1-11/+14
Type: improvement Change-Id: I53890a13210cfb0d2b2d9d8cfd9b15118d3bb273 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-27vlib: handoff reworkDamjan Marion1-1/+0
Type: improvement Change-Id: I1e199ae31e969154319e94c5cd286b8d8adc6660 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-06vlib: rename vl_counter_t to vlib_error_desc_tOle Troan1-2/+2
Type: improvement Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I368b0410db2d633d3c52199c840e24d21952c1b4
2021-04-30build: switch release build to -O3Damjan Marion1-1/+1
Type: make Change-Id: Ia39c2f847e7b4907fdd3fcac75897b8b4c545a65 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-15vlib: make vlib_pending_frame_t smallerDamjan Marion1-3/+3
Type: improvement Change-Id: I8715631718dca9bc7d7b364451b137484aadd58e Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-03-26vlib: split vlib_main_t into global and per-threadDamjan Marion1-22/+19
Type: refactor Change-Id: I8b273bc3bf16aa360f031f1b2692f766e5fc4613 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-03-23vlib: add node adaptive mode flagFlorin Coras1-0/+1
Don't switch nodes from interrupt to polling state unless adaptive mode flag set. For starters, flag set only on interface input nodes with no polling rx queue and at least one in adaptive mode. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ica1c75f605ead82b7cf74c45c6a774461008f054
2021-03-11vlib: refactor node function variantsDamjan Marion1-20/+36
It allows default variant selection from startup.conf Type: improvement Change-Id: Idff95e12dd0c105dab7c905089548b05a6e974e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-03-09vlib: remove unused functionDamjan Marion1-9/+0
Not used for a looong time.... Type: refactor Change-Id: I4b1d6216dbd349dd02c1d7c884f89ece66cd6045 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-01-21interface: rx queue infra rework, part oneDamjan Marion1-14/+2
Type: improvement Change-Id: I4008cadfd5141f921afbdc09a3ebcd1dcf88eb29 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-10-13stats: counters data modelOle Troan1-2/+3
This adds a new data model for counters. Specifying the errors severity and unit. A later patch will update vpp_get_stats to take advantage of this. Only the map plugin is updates as an example. New .api language: A new "counters" keyword to define counter sets. counters map { none { severity info; type counter64; units "packets"; description "valid MAP packets"; }; bad_protocol { severity error; type counter64; units "packets"; description "bad protocol"; }; }; Each counter has 4 keywords. severity, which is one of error, info or warn. A type, which is one of counter64 or gauge64. units, which is a text field using units from YANG. paths { "/err/ip4-map" "map"; "/err/ip6-map" "map"; "/err/ip4-t-map" "map"; "/err/ip6-t-map" "map"; }; A new paths keyword that maps the counter-set to a path in the stats segment KV store. Updated VPP CLI to include severity so user can see error counter severity. DBGvpp# show errors Count Node Reason Severity 13 ethernet-input no error error Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib2177543f49d4c3aef4d7fa72476cff2068f7771 Signed-off-by: Ole Troan <ot@cisco.com>
2020-07-16misc: add callback hooks and refactor pmcTom Seidenberg1-7/+0
Callbacks for monitoring and performance measurement: - Add new callback list type, with context - Add callbacks for API, CLI, and barrier sync - Modify node dispatch callback to pass plugin-specific context - Modify perfmon plugin to keep PMC samples local to the plugin - Include process nodes in dispatch callback - Pass dispatch function return value to callback Type: refactor Signed-off-by: Tom Seidenberg <tseidenb@cisco.com> Change-Id: I28b06c58490611e08d76ff5b01b2347ba2109b22
2020-07-01vlib: wake up workers if interrupts are postedBenoît Ganne1-0/+1
Type: fix Change-Id: If8dbbcb46193fd057fe8d704058609a3a8787d6c Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-06-03vlib: improve node interrupt handlingDamjan Marion1-5/+12
- add ability to pass data together with interrupt - avoid locking for local interrupts (same thread) Type: improvement Change-Id: I73a2ab2e716bb887a1f02c87788ae83e329f9b40 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-05-20vlib: mmap process stacksDamjan Marion1-25/+4
Instead of allocating stack from the main heap, this patch mmaps stack memory together with guard page. This aproach reduces main heap usage, and stack memory is prefaulted on demand, so bigger process stacks will have zero impact on memory usage as long as stack memory is not needed for real. In addition, it fixes issue with systems which have bigger default page size (observed with 65536). Type: improvement Change-Id: I593365c603d4702e428967d80fd425fdee2c4a21 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-04-28vlib: startup multi-arch variant configurationRay Kinsella1-0/+2
Support for startup node multi-arch variant selection through startup.conf. This is to facilitate unit, functional testing and benchmarking of non-default multi-arch variant node code path. Also added parameters to make test, to specific using multi-arch variants in unit testing. Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I94fd332bb629683b7a7dd770ee9f615a9a424060
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-02ipsec ip tcp l2: multiarch nodes cannot be declared as staticDamjan Marion1-0/+1
Credits to ray.kinsella@intel.com who spotted the issue and identified root cause. Type: fix Change-Id: I4afe74c47769484309f6aebca2de56ad32c8041f Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-07-23vlib: address vlib_error_t scaling issueDave Barach1-0/+19
Encoding the vpp node index into the vlib_error_t as a 10-bit quantity limits us to 1K graph nodes. Unfortunately, a few nodes need 6 bit per-node error codes. Only a very few nodes have so many counters. It turns out that there are about 2K total error counters in the system, which is (approximately) the maximum error heap index. The current (index,code) encoding limits the number of interfaces to around 250, since each interface has two associated graph nodes and we have about 500 "normal, interior" graph node This patch adds an error-index to node-index map, so we can store error heap indices directly in the vlib_buffer_t. Type: refactor Change-Id: I28101cad3d8750819e27b8785fc0cf71ff54f79a Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-18vlib: convert frame_index into real pointersAndreas Schultz1-6/+5
The fast path almost always has to deal with the real pointers. Deriving the frame pointer from a frame_index requires a load of the 32bit frame_index from memory, another 64bit load of the heap base pointer and some calculations. Lets store the full pointer instead and do a single 64bit load only. This helps avoiding problems when the heap is grown and frames are allocated below vm->heap_aligned_base. Type: refactor Change-Id: Ifa6e6e984aafe1e2755bff80f0a4dfcddee3623c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-08trace frame-queue on trigger out of memorydongjuan1-1/+1
FRAME_QUEUE_NELTS is 64 in thread.c Change-Id: Ie7e5962afe05dfc7f38e3d597dabc74dcc2dab8d Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
2019-03-13deprecate VLIB_NODE_FUNCTION_MULTIARCHFilip Tehlar1-4/+0
Change-Id: I403173846bc5b1bbbe2a2c41225b0f666f851cb9 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-02-22Add no-append flag to vlib_frame_tDamjan Marion1-0/+3
Change-Id: I01c4f5755d579282773ac227b0bc24f8ddbb2bd1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-02Deprecate old mutliarch code, phase 1Damjan Marion1-24/+2
It is causing compilation sloness with gcc-7 so removing it before it was originally planned. So far macros are left in the tree so we can know which nodes to convert to new multiarch code. Change-Id: Idb14622ca61fdce1eba59723b20d98715b7971e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-24perfmon plugin: 2-way parallel stat collectionDave Barach1-2/+4
As a FUD reduction measure, this patch implements 2-way parallel counter collection. Synthetic stat component counter pairs run at the same time. Running two counters (of any kind) at the same time naturally reduces the aggregate time required by an approximate factor-of-2, depending on whether an even or odd number of stats have been requested. I don't completely buy the argument that computing synthetic stats such as instructions-per-clock will be inaccurate if component counter values are collected sequentially. Given uniform traffic pattern, it must make no difference. As the collection interval increases, the difference between serial and parallel component counter collection will approach zero, see also the Central Limit theorem. Change-Id: I36ebdcf125e8882cca8a1929ec58f17fba1ad8f1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-30Metadata / opaque formatting belongs in vppDave Barach1-0/+17
VPP graph dispatch trace record description: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Major Version | Minor Version | NStrings | ProtoHint | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer index (big endian) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + VPP graph node name ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer Metadata ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer Opaque ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Buffer Opaque 2 ... ... | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | VPP ASCII packet trace (if NStrings > 4) | NULL octet | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Packet data (up to 16K) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Graph dispatch records comprise a version stamp, an indication of how many NULL-terminated strings will follow the record header, and a protocol hint. The buffer index allows downstream consumers of these data to easily filter/track single packets as they traverse the forwarding graph. FWIW, the 32-bit buffer index is stored in big endian format. As of this writing, major version = 1, minor version = 0. Nstrings will be either 4 or 5. Here is the current set of protocol hints: typedef enum { VLIB_NODE_PROTO_HINT_NONE = 0, VLIB_NODE_PROTO_HINT_ETHERNET, VLIB_NODE_PROTO_HINT_IP4, VLIB_NODE_PROTO_HINT_IP6, VLIB_NODE_PROTO_HINT_TCP, VLIB_NODE_PROTO_HINT_UDP, VLIB_NODE_N_PROTO_HINTS, } vlib_node_proto_hint_t; Example: VLIB_NODE_PROTO_HINT_IP6 means that the first octet of packet data SHOULD be 0x60, and should begin an ipv6 packet header. Change-Id: Idf310bad80cc0e4207394c80f18db5f77c378741 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach1-1/+1
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-22X86_64 perf counter pluginDave Barach1-0/+5
Change-Id: Ie5a00c15ee9536cc61afab57f6cadc1aa1972f3c Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-14vlib: introduce user flags in vlib_frame_tDamjan Marion1-0/+3
Those flags have local significance and they can be used for sending hints to the next node. Change-Id: Ic2596ee81c64cd16f96344365370e8fcdc465354 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-28vlib: add 'show node' and 'set node function' CLIDamjan Marion1-0/+13
Change-Id: I084d7c9e34329f10b5fe45e0b157c4defe0f2811 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion1-0/+5
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-29Add VLIB_NODE_FN() macro to simplify multiversioning of node functionsDamjan Marion1-0/+28
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-09plugins: unload plugin if early init failsDamjan Marion1-0/+8
Change-Id: I32f68e2ee8f5d32962acdefb0193583f71d342b3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-08-25TCP horizontal scalingDave Barach1-4/+1
- Remove frame handoff support machinery. We haven't used it in a long time. - Configuration support for the local endpoints bihash table - Drop lookup failure packets in tcp46_syn_sent Change-Id: Icd51e6785f74661c741e76fac23d21c4cc998d17 Signed-off-by: Dave Barach <dave@barachs.net>
2017-06-28switch vlib process model to tw_timer_template timer implDave Barach1-5/+10
Change-Id: I36bb47faea55a6fea7af7ee58d87d8f6dd28f93d Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-25Fix structure alignment with 32-bit pointersDamjan Marion1-0/+4
Change-Id: I740de6c0f12dab452b4349e3bf89ff976a6268c0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-3/+3
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-04vlib: make vlib_node_interrupt_pending(...) thread safeDamjan Marion1-0/+2
Change-Id: I24577bd32ae23fbe8515cc8d960eab5448ce3b5c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-16vlib: make runtime_data thread-localDamjan Marion1-39/+42
Change-Id: I4aa3e7e42fb81211de1aed07dc7befee87a1e18b Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+725
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>