aboutsummaryrefslogtreecommitdiffstats
path: root/src/vlib/trace.c
AgeCommit message (Collapse)AuthorFilesLines
2021-03-26vlib: convert foreach_vlib_main macro to be more gdb and clang-format friendlyDamjan Marion1-85/+77
Type: improvement Change-Id: I1152e58d7bfcb3c4347147f87a834d45ad51cdfe Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-01-25vlib: add show trace limit warning at the end of output tooBenoît Ganne1-2/+4
Users tend to miss the warning too often, add it to the end of the output in hope it would be easier to catch. Type: improvement Change-Id: I264df7e3b6ab1ffb1a383807f4444d9cbaf40999 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-12-15classify: add pcap/trace classfier mgmt API callsJon Loeliger1-7/+8
Add lookup/get/set API calls to manage both PCAP and Trace filtering Classifier tables. The "lookup" call may be used to identify a Classifier table within a chain of tables taht matches a particular mask vector. For efficiency, this call should be used to determine to which table a match vector should be added. The "get" calls return the first table within a chain (either a PCAP or the Trace) set of tables. The "set" call may be used to add a new table to one such chain. If the "sort_masks" flag is set, the tables within the chain are ordered such that the most-specific mask is first, and the least-specific mask is last. A call that "sets" a chain to ~0 will delete and free all the tables with a chain. The PCAP filters are per-interface, with "local0", (that is, sw_if_index == 0) holding the system-wide PCAP filter. The Classifier used a reference-counted "set" for each PCAP or trace filter that it stored. The ref counts were not used, and the vector of tables was only used temporarily to establish a sorted order for tables based on masks. None of that complexity was actually warranted, and where it was used, the same could be achieved more simply. Type: refactor Signed-off-by: Jon Loeliger <jdl@netgate.com> Change-Id: Icc56116cca91b91c631ca0628e814fb53f3677d2
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-6/+6
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-04vlib: add postmortem pcap dispatch traceDave Barach1-0/+9
Inspired by a real-life conundrum: scenario X involves a vpp crash in ip4-load-balance because vnet_buffer(b)->ip.adj_index[VLIB_TX] is (still) set to ~0. The problem takes most of a day to occur, and we need to see the broken packet's graph trajectory, metadata, etc. to understand the problem. Fix a signed/unsigned ASSERT bug in vlib_get_trace_count(). Rename elog_post_mortem_dump() -> vlib_post_mortem_dump(), add dispatch trace post-mortem dump. Add FILTER_FLAG_POST_MORTEM so we can (putatively) capture a ludicrous number of buffer traces, without actually using more than one dispatch cycle's worth of memory. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: If093202ef071df46e290370bd9b33bf6560d30e6
2020-10-06feature: Add packet trace APIJon Loeliger1-37/+84
Also spiffed up the vpp_api_test plugin loader so it executes VLIB_INIT_FUNCTIONs and VLIB_API_INIT_FUNCTIONs. Type: feature Change-Id: Id9a4f455d73738c41bcfea220df2112bb9679681 Signed-off-by: Jon Loeliger <jdl@netgate.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2020-08-06misc: harmonize namesDave Barach1-4/+5
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
2020-06-08vlib: stop inlining vlib_add_trace(...)Dave Barach1-0/+9
Packet tracing performance doesn't justify inlining vlib_add_trace(...) over 500 times. It makes a 15% text-segment size difference in a representative use-case: Inline: $ size .../vnet_skx.dir/ipsec/ipsec_input.c.o text data bss dec hex filename 6831 80 0 6911 1aff .../vnet_skx.dir/ipsec/ipsec_input.c.o Not inline: $ size .../vnet_skx.dir/ipsec/ipsec_input.c.o text data bss dec hex filename 5776 80 0 5856 16e0 .../vnet_skx.dir/ipsec/ipsec_input.c.o Retain the original code as vlib_add_trace_inline, instantiate once as vlib_add_trace. Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Iaf431dbf00c4aad03663d86f9dd1322e84d03962
2019-12-05classify: vpp packet tracer supportDave Barach1-1/+32
Configure n-tuple classifier filters which apply to the vpp packet tracer. Update the documentation to reflect the new feature. Add a test vector. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Iefa911716c670fc12e4825b937b62044433fec36
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+12
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-20Add buffer tracing to the dispatch tracerDave Barach1-1/+1
Change-Id: I56f25d653b71a25c70e6c5c1a93dd9c5158f2079 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-6/+6
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-08-24Clean up packet tracer, especially "clear trace"Dave Barach1-24/+10
There are multiple trace enablement schemes. It's easy to end up in vlib_add_trace with tracing disabled insofar as the packet tracer is concerned. When that happens, return the address of a per-system dummy trace record. Change-Id: I929391b8be4ed57e26e291afdc509a15f09a3160 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall1-3/+10
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+545
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>