summaryrefslogtreecommitdiffstats
path: root/src/vlib/unix
AgeCommit message (Collapse)AuthorFilesLines
2020-05-02vlib: add nosyslog unix optionRuslan Babayev2-3/+12
The "nosyslog" option disables syslog just like the "interactive" mode but can be used together with "nodaemon". This is useful for when VPP is running under a process supervisor like runit or daemontools that pipe the stdout/stderr to a dedicated logger service. Type: feature Change-Id: Ic4287338d6836fea9f3eabdcf960dc1f51875dd1 Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
2020-04-27vlib: deprecate i2c and cjDave Barach2-363/+0
i2c follows its only use case - the original 82599 driver - into extras/deprecated. cj is/was an emergency debug tool unused in several years. Move to extras/deprecated/vlib Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ib55b65373f62630db295c562974bd8f2456c3107
2020-03-21vlib: leave SIGPROF signal with its default handlerJieqiang Wang1-0/+1
When profiling VPP with MAP (a software profile suite on Arm CPUs, see details in https://www.arm.com/products/development-tools/server-and-hpc/forge/map) on Arm servers, VPP will receive SIGPROF signal because MAP uses SIGPROF signal to drive its sampler to do profiling on VPP. However, the default action of SIGPROF signal handler in VPP such as unix_signal_handler() is process termination. To profile VPP with MAP, the SIGPROF handler should be left as default, and MAP sampler will overwrite it with its own implementation. Type: feature Change-Id: Ie14e513d35ec27a66e95067689408bad8ed1ad6b Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
2020-03-12vlib: fix unix cli SIGSEGV for empty line inputFan Zhang1-1/+2
When logging is enabled, an empty line input (press Enter only) will cause SIGSEGV. This patch fixes the problem by checking the command length first. Type: fix Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: Ib4cbd1c7bfd6a694e289d28958875c7d2356a93e
2020-03-11vlib: unix cli - log cli commands one per linePaul Vinciguerra1-0/+2
This changeset modifies the log output so that cli commands now look like: cat /tmp/vpp-cli.log 2020/03/10 19:24:42:186: ***** Start: PID 29570 ***** /* [0] is stdin */ 2020/03/10 19:24:53:518[0]: show clock 2020/03/10 19:24:56:078[0]: show clock 2020/03/10 19:25:01:983[0]: show pci /* [1] is vppctl socket */ 2020/03/10 19:26:14:372[1]: show ver 2020/03/10 19:26:23:395[1]: show hardware-interfaces 2020/03/10 19:26:28:507[1]: q instead of: cat /tmp/vpp-cli.log 2020/03/01 00:40:12:834: ***** Start: PID 29974 ***** 2020/03/01 00:40:24:969[0]: show interface2020/03/01 00:40:31:945[0]: show clo2020/03/01 00:40:41:288[0]: show classify 2020/03/01 00:40:43:753[0]: show classify ?2020/03/01 00:40:53:392[0]: show classify tables2020/03/01 00:40:57:352[0]: quit Type: improvement Change-Id: I38d85535977296d174db7121ae340850b6476a39 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-02-11misc: fix coverity warningsDave Barach1-4/+6
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I6b1ea13fc83460bf4ee75cb9249d83dddaa64ded
2020-02-10misc: add FEATURE.yaml filesDave Barach1-0/+13
For src/vnet/classify, src/vnet/cop, src/vnet/pg, and src/vlib/unix Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ib6ab734608693a1e9562a44808246950616e8d36
2020-02-06vlib: add plugin override supportDave Barach3-31/+185
Allow a plugin to override (suppress loading of) other plugins. This mechanism allows a developer to prevent specific plugins from being loaded. To do so, provide an "overrides" list in the plugin definition: VLIB_PLUGIN_REGISTER () = { <snip> .overrides = "avf_plugin.so,ioam_plugin.so,dpdk_plugin.so", }; or some such. Simply list the plugins in question as shown above. The .overrides structure member is limited to 256 octets. The named .elf section mechanism used to discover the vlib_plugin_registration_t's precludes the use of a variable-length array of strings. Use the vlib log to eliminate plugin and built-in vat plugin loader console spew. Added vlib_log_register_class_rate_limit(...) to allow procedural configuration of the log rate-limit. We *never* want to rate-limit plugin loader messages. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I0a9327b8cf5508482f057342783252112cb44170
2019-12-17misc: don't os_exit(1) causing core on SIGINTChristian E. Hopps1-1/+5
It's not typical for a program to core when it receives a SIGINT, so keep this from happening. Type: fix Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: I2c15985a57e6ea898ff05c4001e4b30b41154eba
2019-12-17vlib: fix startup-config-process stack overflowGordonNoonan1-0/+1
Type: fix Startup config setting an i40e/ice interface up in Debug VPP consumes more than the currently available stack space. Signed-off-by: GordonNoonan <gordon.noonan@intel.com> Change-Id: I98b52c5596799017b97f802a8661b76cd1bb3245
2019-11-27vlib: add 'wait' cli commandPaul Vinciguerra1-0/+40
When running exec scripts, there can be a need to wait between statements. Type: feature Change-Id: I2a45b390697e09fc222358c9354f28e3368a06ba Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-28vlib: unix trivial- clean up typos in docsPaul Vinciguerra1-2/+2
seen while reading through the code. Type: style Change-Id: I7a2f021b9f06d0eebb2ea3d0cafb6955ccb14781 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-08vlib: fix cli process stack overflowChenmin Sun1-1/+1
Type: fix Some cli processes, including configuring an test flow on an i40e interface consume more than the currently available stack space. Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I3df53d251cd43286f94647384d6e50a463bad15c
2019-09-17vlib: fix cli process stack overflowAloys Augustin1-1/+1
Some cli processes, including bringing up an i40e interface with dpdk, consume more than the currently available stack space. Type: fix Fixes: VPP-1774 Signed-off-by: Aloys Augustin <aloaugus@cisco.com> Change-Id: I86ceb9e6e07523d5e0f760b5922467f09a8d4006
2019-09-16vlib: cli support ctrl-w to erase left wordHiroki Shirokura1-0/+47
Type: fix Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com> Change-Id: I3ae7dc3858d0353764d629d6a9eff2bdab5f8768
2019-08-20vlib: create unix runtime directoryOle Troan1-0/+5
Ensure the runtime directory is created at startup. Default /run/vpp Type: fix Fixes: I53d70939c8125d04a365ac51a6cbf8926dc52adf Change-Id: I6d70364ea756b86768c4dd1f6a9383238ed275c8 Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-09stats: create /run/vpp before stat socket bind()YohanPipereau1-1/+1
When VPP tries to bind to stats.sock it will complain about non-existing /run/vpp directory. /run/vpp is created before cli socket operations are performed. The same should be done for stat socket. Ticket: VPP-1708 Type: fix Change-Id: I53d70939c8125d04a365ac51a6cbf8926dc52adf Signed-off-by: YohanPipereau <ypiperea@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-07-10vlib: Replace timer in CLI with an event processChris Luke1-16/+140
The CLI code, when it accepts a socket connection, ran a timer for each session that would ensure the CLI session was started should the TELNET negotiation stage fail to complete. It has since transpired that this is unsafe; the timer is capable of firing in critical sections, during a spinlock, and since we peform non-trivial things in the handler it can cause a deadlock. This was reported recently in VPP-1711 but a search of history suggests this may also be (one of) the causes in VPP-1413. This change replaces that method with an event-driven process. The process is created when the first socket connection is accepted. When new connections are created the process is sent an event to register the new session in a list. That event process has a loop that evaluates the list of oustanding sessions and if a deadline expires, their session is started if it has not been already, and then removed from the list. If we have pending sessions then the loop waits on a timer or an event; if there are no sessions it waits on events only. Type: fix Ticket: VPP-1711 Change-Id: I8c6093b7d0fc1bea0eb790032ed282a0ca169194 Signed-off-by: Chris Luke <chrisy@flirble.org> Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-11vlib: avoid retrieving freed file in epollFlorin Coras1-6/+7
Type:fix Change-Id: Id7f4f6e2a2f844085f511a33aa1db3968f5d97bb Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-05-17Fix 'terminal history off' crasherChris Luke1-7/+14
- 'set terminal history off' or '... limit 0' has an incorrect terminal condition and tries to vec_delete one-too-many times causing a crash. - Changing >= to > fixes this. - In any case, a single vec_delete is more efficient, so do that instead. Change-Id: Ia0db63b6c5c7891d75b302e793b4e4985dd86ebb Signed-off-by: Chris Luke <chrisy@flirble.org>
2019-05-16init / exit function orderingDave Barach2-4/+14
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-14Preallocate mhash key_tmps vectorDave Barach1-1/+2
Fix os_get_nthreads() so that it starts returning the correct answer as early as possible. Change-Id: Id5292262f2c3f521b07ffbe6a9f6748dcc4dcb7d Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-06gcov / test framework: sigterm not sigkillDave Barach1-0/+11
Otherwise, gcov data vanishes without a trace. Add a __gcov_flush() call to the unix signal handler, under #ifdef CLIB_GCOV. Add -DCLIB_GCOV to vpp_gcov_TAG_CFLAGS. Change-Id: I2726e671b26dfbe7fae88f46a8207bb2b5106884 Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-02vlib: align stack on OS page sizeBenoît Ganne1-1/+1
Change-Id: I6d7589c967c5801a6a21a213723e2a895269e105 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-04-24Clean up multi-thread barrier-sync hold-down timerDave Barach1-3/+27
Main thread: don't bother with the barrier sync hold-down timer if none of the worker threads are busy. Worker threads: avoid epoll_pwait (10ms timeout) when the control-plane has been active in the last half-second. Change-Id: I82008d09968c65e2a4af0ebb7887389992e60603 Signed-off-by: Dave Barach <dave@barachs.net>
2019-04-22vlib epoll: handle file removal on EPOLLINFlorin Coras1-0/+2
Change-Id: I7a3526a8fdf17afb8cc2225bdfbd57f661680992 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-04-18vlib epoll: protect against clib file pool expansionFlorin Coras1-1/+3
Change-Id: I320e7c2fdacb3056bc448c73fec08d9e2978ee5e Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-04-18Fix memory corruption faulting [VPP-1639]Artem Belov1-3/+3
File pool may be reallocated on epoll events processing. *f* pointer shows to already freed address and corrupting memory chunk on clib_file_t property change. Change-Id: I751bddce27325452862b939c1a3eec2ccd9b71bb Signed-off-by: Artem Belov <artem.belov@xored.com>
2019-04-12Trivial: Update doxygen comments.Paul Vinciguerra1-3/+10
Change-Id: I2f7f3898b913c9b1a37b1c8c84a8df3799c49c5d Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra2-5/+5
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-21Ignore SIGTERM during the vpp boot sequenceDave Barach1-1/+6
Call setjmp and mark the setjmp context valid just prior to entering the vpp main loop. Change-Id: I26d5cd6a624cb2a497d81eb85a62365621b3b469 Signed-off-by: Dave Barach <dave@barachs.net>
2019-03-01Save signum and faulting address in static variablesDave Barach1-0/+6
Comes in handy when looking at core files from optimized images. Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I45c8400d15614d5a04a3dcfb9b7daccab47ab446
2019-02-09buffers: fix typoDamjan Marion1-3/+3
Change-Id: I4e836244409c98739a13092ee252542a2c5fe259 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-06buffers: make buffer data size configurable from startup configDamjan Marion1-3/+5
Example: buffers { default data-size 1536 } Change-Id: I5b4436850ca18025c9fdcfc7ed648c2c2732d660 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-28Less intrusive way to capture numa_node and cpu_id changesDamjan Marion2-3/+10
Change-Id: I3a33fb81f31ed473811e9e7a6197b81135913865 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-27Fix issue with cpu_id and numa_code captured too earlyDamjan Marion1-2/+1
Change-Id: I79b213b34c6071d14acf1922f89037a4a5a36c45 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-20buffers: remove VLIB_BUFFER_DEFAULT_FREE_LIST macro and fl->n_data_bytesDamjan Marion1-5/+3
Change-Id: I0ba5175be077c40556f2a3ce629c5bbcd71e0a81 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-20Store numa-noda and cpu-index in vlib_main_tDamjan Marion1-0/+2
Change-Id: If88ccd965122b9318a39a8d71b53334cd1fd81e4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-26cj: cj dump crashSteven1-1/+1
Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault. 0x00007ffff670da53 in cj_dump_one_record (r=0x7ffff50f0fec) at /home/sluong/vpp3/vpp/src/vlib/unix/cj.c:138 138 (long long unsigned int) r->data[1]); (gdb) p *cjm $1 = {tail = 58645908, records = 0x7fffb64646ec, num_records = 512, enable = 1, vlib_main = 0x7ffff6953240 <vlib_global_main>} (gdb) p /x cjm $2 = 0x7ffff6953880 (gdb) p /x *cjm $3 = {tail = 0x37edd94, records = 0x7fffb64646ec, num_records = 0x200, enable = 0x1, vlib_main = 0x7ffff6953240} (gdb) cjm->tail is a 64 bit counter, not the total number of records. Dumping from 0 to cjm->tail can be a very large number of records which go beyond the limit. I believe we meant to dump from 0 to index. index has been set by this statement index = (cjm->tail + 1) & (cjm->num_records - 1); Change-Id: Ie1a8ba757598de9757accc1488577c15aa49726b Signed-off-by: Steven <sluong@cisco.com>
2018-10-23Numa-aware, growable physical memory allocator (pmalloc)Damjan Marion2-3/+0
Change-Id: Ic4c46bc733afae8bf0d8146623ed15633928de30 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23c11 safe string handling supportDave Barach4-13/+13
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-19vppinfra: add atomic macros for __sync builtinsSirshak Das1-1/+1
This is first part of addition of atomic macros with only macros for __sync builtins. - Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/) Additionally - clib_atomic_release macro added and used in the absence of any memory barrier. - clib_atomic_bool_cmp_and_swap added Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com>
2018-09-09vlib: crash in linux_epoll_input_inline for accessing free file index [VPP-1412]Steven1-2/+31
Under rare scenario, epoll may still post an event to VPP although the file descriptor is already deleted via epoll_ctl (EPOLL_CTL_DEL) and the file descriptor is close. VPP tries to access the free file index entry and crash. The fix is to throw away the events which the file descriptor is already deleted. Change-Id: Ieca3a1873aecb28630c3abc42c40341f27c2faa7 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit aec7297ba012e1fe4bbf85cdaec8e810aa476cea)
2018-09-07Silence warning over ignored return value (CID 187932)Chris Luke1-2/+2
- We deliberately ignore the return value. Change-Id: If467911b019e7336cf9dc6d4c95c2cd53a5af33f Signed-off-by: Chris Luke <chrisy@flirble.org>
2018-09-06Fix Telnet option processing issueChris Luke1-1/+8
- A check for the length of the buffer should have used the provided 'len' variable, not 'vec_len' since the buffer pointer may be within a vector, but not the start of one. 'vec_len' reports 0 in that case, causing premature exit from the options processing loop and a wait for further input before it checks the next option. - Also add TCP_NODELAY to CLI sockets to disable Nagle on TCP connections for a possible improvement in interactive response. Change-Id: Ie1f53c003ca7d66bed51f437d298183215bad38c Signed-off-by: Chris Luke <chrisy@flirble.org>
2018-07-18Add config option to use dlmalloc instead of mheapDave Barach1-0/+2
Configure w/ --enable-dlmalloc, see .../build-data/platforms/vpp.mk src/vppinfra/dlmalloc.[ch] are slightly modified versions of the well-known Doug Lea malloc. Main advantage: dlmalloc mspaces have no inherent size limit. Change-Id: I19b3f43f3c65bcfb82c1a265a97922d01912446e Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-12Fix debug CLI node recycling bugsDave Barach1-5/+26
When creating a new - as opposed to recycled - debug CLI process node, perform a proper barrier sync and node runtime update. Otherwise, the graph replicas diverge for some period of time. That's not immediately fatal, but it's not a good idea, either. When renaming a debug cli process node, fix all of the name-vector replicas before freeing the [one-and-only] name vector. This fixes the so-called stats segment node runtime scraper crash, which tripped over a replicated dangling reference to the recently-freed debug CLI node name. Change-Id: Ieffabd9f003139e534b9d79b88370439907930e5 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-06-30cli: Validate cli_file_index on quit commandSteve Shin1-0/+4
VPP crash happens with 'vppctl quit quit' command. The 2nd quit command tries to access the file index which is already freed by the first quit. This can be avoided to validate cli_file_index. Change-Id: I880514c93523db2a727d7510c97950582cd6a6c8 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-06-26add backtrace in unix_signal_handlerKingwel Xie1-9/+49
crash stack backtrace will be directed to syslog 1. make use of glic backtrace in execinfo.h. the old clib_backtrace is removed 2. install SIGABRT in signal handler, but have to remove it when backtrace is done. reason is to capture stack trace caused by SIGABRT. vPP ASSERT always call os_exit then abort(). we definitely want to know the trace of this situation. It is a little tricky to avoid SIGABRT infinite loop 3. always load symbols by calling clib_elf_main_init () in main(). Otherwise, PC addresses instead of symbols will be displayed. Change-Id: I150e15b94a4620b2ea4f08c73dc3e6ad1856de1e Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2018-06-21configurable per-dispatch-cycle sleepDave Barach3-2/+25
Workaround for lack of driver interrupt support. Also quite handy for home gateway, laptop/vagrant, other use-cases not requiring maximum vectors/second for proper operation. Change-Id: Ifc4b98112450664beef67b89ab8a6940a3bf24b5 Signed-off-by: Dave Barach <dave@barachs.net>