aboutsummaryrefslogtreecommitdiffstats
path: root/src/vlib
AgeCommit message (Collapse)AuthorFilesLines
2020-05-15ikev2: add support for NAT traversalFilip Tehlar1-5/+6
Type: feature * initiator behind NAT supported * tested with static NAT mappings * works only with pre-configured tunnels The pre-configured tunnel has to be defined as follows: initiator (i) side: src=ip(i) dst=ip(r) responder (r) side: src=ip(r) dst=ip(nat) Change-Id: Ia9f79ddbbcc3f7dc8fde6bbeca2a433e3b784e94 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-05-14vlib: fix unix cli commands crash without sessionBenoît Ganne1-15/+23
If a cli command is run while there are no cli session, then cm->cli_file_pool will not be initialized and we should not try to operate on it. Type: fix Change-Id: Iaea15a23f7efd5b17fab13e6c1cbb3a9a34080e0 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-05-11vlib: fix u64 error counter cli printingFlorin Coras1-3/+3
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie35dc623394cfb6c358740361fd85aa0924ab187
2020-05-06misc: fix coverity warningsDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I51660e4b02f449bd2db12a8cfd395c6c343d2dee
2020-05-02vlib: add nosyslog unix optionRuslan Babayev2-3/+12
The "nosyslog" option disables syslog just like the "interactive" mode but can be used together with "nodaemon". This is useful for when VPP is running under a process supervisor like runit or daemontools that pipe the stdout/stderr to a dedicated logger service. Type: feature Change-Id: Ic4287338d6836fea9f3eabdcf960dc1f51875dd1 Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
2020-04-30build: rework x86 CPU variantsDamjan Marion1-1/+1
Type: improvement Change-Id: Ief243f88e654e578ef9b8060fcf535b364aececb Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-04-28vlib: add ASSERT to vlib_time_now(...)Dave Barach1-0/+7
Calling vlib_time_now (&vlib_global_main) from a worker thread is a bad mistake. ASSERT (vm->thread_index == __os_thread_index) will catch it. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I55af6de84e06143f8f43adc62103b77267a7a441
2020-04-28vlib: use flexible array in vlib_buffer for GCC-10Benoît Ganne1-1/+1
GCC-10 increase overflows-related warnings but gets confused by 0-length arrays. Use C99 flexible length array instead. Type: fix Change-Id: Ie62cfa8faaa408479a598785fd3f06ffd0233c7a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-04-28vlib: startup multi-arch variant configurationRay Kinsella4-1/+229
Support for startup node multi-arch variant selection through startup.conf. This is to facilitate unit, functional testing and benchmarking of non-default multi-arch variant node code path. Also added parameters to make test, to specific using multi-arch variants in unit testing. Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I94fd332bb629683b7a7dd770ee9f615a9a424060
2020-04-28stats: add apis to delete simple/combined countersOle Troan3-0/+36
vlib_free_simple_counter() vlib_free_combined_counter() Frees the name and two dimensional vector from the stats segment. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: If1becf7d09520ba41a3d59e2df94958ecfcf6948
2020-04-27vlib: deprecate i2c and cjDave Barach7-672/+0
i2c follows its only use case - the original 82599 driver - into extras/deprecated. cj is/was an emergency debug tool unused in several years. Move to extras/deprecated/vlib Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ib55b65373f62630db295c562974bd8f2456c3107
2020-04-21vlib: queue_hi_thresh fix to avoid deadlockElias Rudberg1-2/+4
Adapt queue_hi_thresh value using num_threads to avoid risk of deadlock between threads which could happen for example when different NAT threads try to handoff work to each other at the same time when their frame queues are congested. This change ensures that each thread can reserve a queue entry without causing problems even in the most extreme case when all threads attempt to add to the same queue simultaneously when the queue is nearly full. Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: I9e02f753bd00833d8dd500d181b0d4f9a454d703
2020-04-13buffers: configurable buffer fault injectorDave Barach7-0/+108
When configured at compile time via the cmake VPP_BUFFER_FAULT_INJECTOR option, the buffer allocator will appear to fail a certain fraction of the time. By default, the allocator succeeds 80% of the time. Detailed command line configuration options are available, but only when the image has been compiled with cmake option described above: vlib { buffer-alloc-success-rate [0.0 ... 1.0] buffer-alloc-success-seed <nnnn> } Modify vlib_buffer_pool_create(...) so 0 is always an invalid buffer index. Debug images: add checks for bad buffer index enqueues, and also verify that f->n_vectors doesn't accidentally map one or more instances of the frame poison pattern 0xfefefefe. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Iab939858014463d1e664682805013d334d6fcbe5
2020-04-09misc: fix error handling in punt_replicateDave Barach1-2/+7
If vlib_buffer_clone (...) fails due to a buffer allocation error, update *n_dispatched with the actual number of clones, not the requested number of clones. Punt_replicate(...) should not set *to_next[0] = bi0. The original buffer is enqueued separately in punt_dispatch_node(...) Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I774ad8f8c1a0633de4cf8ae5530629201c229347
2020-04-07l2: handle complete clone fail in l2_floodDave Barach1-2/+2
vlib_buffer_clone(...) may not manage to produce any buffer clones at all. vlib_buffer_clone_256 should not smash the original buffer reference count if no clones are produced. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I14d9d53637a220485c7a0036cfc75a4149b264ea
2020-03-31vlib: move pci api types from vnet/pci to vlib/pciJakub Grajciar4-0/+103
Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I1a60809a8bbbbb8ac8b65ab990d51aae1229647f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-03-21vlib: leave SIGPROF signal with its default handlerJieqiang Wang1-0/+1
When profiling VPP with MAP (a software profile suite on Arm CPUs, see details in https://www.arm.com/products/development-tools/server-and-hpc/forge/map) on Arm servers, VPP will receive SIGPROF signal because MAP uses SIGPROF signal to drive its sampler to do profiling on VPP. However, the default action of SIGPROF signal handler in VPP such as unix_signal_handler() is process termination. To profile VPP with MAP, the SIGPROF handler should be left as default, and MAP sampler will overwrite it with its own implementation. Type: feature Change-Id: Ie14e513d35ec27a66e95067689408bad8ed1ad6b Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
2020-03-21vlib: allow using core 0 as a last resortVladimir Isaev1-15/+12
Right now even following configuration fails: cpu { corelist-workers 0 } I think we should allow user to use CPU 0 if he explicitly configured it or as the last automatically assigned core. Type: improvement Signed-off-by: Vladimir Isaev <visaev@netgate.com> Change-Id: I041c30349bace558c673475e9a0cffccae5821f7
2020-03-21vlib: complain if workers are configured twiceVladimir Isaev1-1/+10
Right now following configuration leads to crash: cpu { corelist-workers 2 workers 2 } because threads count will be set to 2, but we have only one core in coremask. Type: fix Signed-off-by: Vladimir Isaev <visaev@netgate.com> Change-Id: Ia93b892733971e7c8ddfceaaec5f4eb8bf9063ac
2020-03-21vlib: fix error when creating avf interface on SMP systemJieqiang Wang1-1/+13
On SMP architecture, '/sys/bus/pci/devices/<devices id>/numa_node' file will return -1 as a valid value if it does not have any NUMA node information. Using -1 as a valid node id to access data structures will cause memory issue. Fix the error by setting the value of numa_node to 0 if '/sys/bus/pci/devices/ <devices id>/numa_node' returns -1 and it is a SMP system. Type: fix Change-Id: Ib60e79c3656fe5b17e08fd9011122683e8b08b6f Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
2020-03-20rdma: ring db only once per vector on txBenoît Ganne1-0/+18
Type: improvement Change-Id: I09b017d60bc38ff8a4a7a73aff42b27611bd8955 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-03-13vlib: add verbose sh node optionFlorin Coras1-3/+28
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I915dace4afe07ac3281f248ef7468fa5247c9668
2020-03-12vppinfra: refactor clib_timebase_tDave Barach1-1/+8
Add a clib_time_t * argument to clib_timebase_init(...), to encourage client code to share the vlib_main_t's clib_time_t object. Display the current day / date in GMT via the "show time" debug CLI. Fix the test framework so it processes the new "show time" output format. Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I5e52d57eb164b7cdb6355362d520df6928491711
2020-03-12vlib: fix unix cli SIGSEGV for empty line inputFan Zhang1-1/+2
When logging is enabled, an empty line input (press Enter only) will cause SIGSEGV. This patch fixes the problem by checking the command length first. Type: fix Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: Ib4cbd1c7bfd6a694e289d28958875c7d2356a93e
2020-03-11vlib: unix cli - log cli commands one per linePaul Vinciguerra1-0/+2
This changeset modifies the log output so that cli commands now look like: cat /tmp/vpp-cli.log 2020/03/10 19:24:42:186: ***** Start: PID 29570 ***** /* [0] is stdin */ 2020/03/10 19:24:53:518[0]: show clock 2020/03/10 19:24:56:078[0]: show clock 2020/03/10 19:25:01:983[0]: show pci /* [1] is vppctl socket */ 2020/03/10 19:26:14:372[1]: show ver 2020/03/10 19:26:23:395[1]: show hardware-interfaces 2020/03/10 19:26:28:507[1]: q instead of: cat /tmp/vpp-cli.log 2020/03/01 00:40:12:834: ***** Start: PID 29974 ***** 2020/03/01 00:40:24:969[0]: show interface2020/03/01 00:40:31:945[0]: show clo2020/03/01 00:40:41:288[0]: show classify 2020/03/01 00:40:43:753[0]: show classify ?2020/03/01 00:40:53:392[0]: show classify tables2020/03/01 00:40:57:352[0]: quit Type: improvement Change-Id: I38d85535977296d174db7121ae340850b6476a39 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-03-02rdma: improve rx loopDamjan Marion1-0/+18
Type: improvement Change-Id: If81847bc0c92d167ce03e1e94a2f8e18f8154af2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-02-25vlib: Punt reason allocation listener enable/disable callbackNeale Ranns2-4/+39
Type: improvement allow clients that allocate punt reasons to pass a callback function that is invoked when the first/last client registers to use/listen on that punt reason. This allows the client to perform some necessary configs that might not otherwise be enabled. IPSec uses this callback to register the ESP proto and UDP handling nodes, that would not otherwise be enabled unless a tunnel was present. Change-Id: I9759349903f21ffeeb253d4271e619e6bf46054b Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-24vlib: Alias RX or TX to directionNeale Ranns1-0/+8
Type: improvement for those that find that name usefull. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I6c99bcdbb10ca1615aeea6924c2d93a68b5b7684
2020-02-18vlib: calculate per-worker loops/second metricDave Barach3-1/+48
Use exponential smoothing. Each sample has a half-life of 1 second. reported_rate(t) = reported_rate(t-1) * K + rate(t)*(1-K) Sample every 20ms, i.e. 50 samples per second K = exp (-1.0/20.0); K = 0.95; Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I9aea5dd5fecfaefffb78245316adb4bf62eb2bd4
2020-02-17vlib: fix code of getting numa node with specific cpu_idLijian.Zhang1-3/+18
Use below sysfs files to check which numa node a specific cpu_id belongs to. /sys/devices/system/node/online /sys/devices/system/node/node0/cpulist /sys/devices/system/node/node1/cpulist Type: fix Change-Id: I124b80b1fd4a20dd7bd76f0ae27d5ab23a3a8ff1 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2020-02-11vppinfra: remove the historical mheap memory allocatorDave Barach2-97/+2
The mheap allocator has been turned off for several releases. This commit removes the cmake config parameter, parallel support for dlmalloc and mheap, and the mheap allocator itself. Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I104f88a1f06e47e90e5f7fb3e11cd1ca66467903
2020-02-11misc: fix coverity warningsDave Barach1-4/+6
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I6b1ea13fc83460bf4ee75cb9249d83dddaa64ded
2020-02-11vlib: Skip core 0 if workers are configured.Jon Loeliger1-0/+15
According to the description in the startup.conf, the assignment of worker threads starts with the lcore following the main_lcore. A non-zero skip_cores will correctly achieve this assignment. However, prior to this patch when workers are assigned, the code picks up and assigns core 0 even thought it shouldn't. This patch determins if a non-zero number of workers are desired and if so, marks CPU unavailable for a worker assignment. Type: fix Change-Id: I1fdf73a6f218dcbf146fda2efc90c553f7cd6d20 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2020-02-10vppinfra: use vm memory allocator for numa mappingFlorin Coras2-5/+4
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I13b239cd572ae6dfaec07019d3d9b7c0ed3edcfa
2020-02-10vlib: properly configure main thread's core idJon Loeliger1-0/+2
Prior to this patch, the main thread's core id was always reported as 0. This patch makes a call to vlib_get_thread_core_socket() on the main thread so that its core id is set properly. Type: fix Fixes: 5d64c7868f67749a6c99eb4ee5998b518ab6c71c Change-Id: I019cb95eec031da25197e48d956038c4bd6b5040 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2020-02-10misc: add FEATURE.yaml filesDave Barach1-0/+13
For src/vnet/classify, src/vnet/cop, src/vnet/pg, and src/vlib/unix Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ib6ab734608693a1e9562a44808246950616e8d36
2020-02-06vlib: add plugin override supportDave Barach6-36/+205
Allow a plugin to override (suppress loading of) other plugins. This mechanism allows a developer to prevent specific plugins from being loaded. To do so, provide an "overrides" list in the plugin definition: VLIB_PLUGIN_REGISTER () = { <snip> .overrides = "avf_plugin.so,ioam_plugin.so,dpdk_plugin.so", }; or some such. Simply list the plugins in question as shown above. The .overrides structure member is limited to 256 octets. The named .elf section mechanism used to discover the vlib_plugin_registration_t's precludes the use of a variable-length array of strings. Use the vlib log to eliminate plugin and built-in vat plugin loader console spew. Added vlib_log_register_class_rate_limit(...) to allow procedural configuration of the log rate-limit. We *never* want to rate-limit plugin loader messages. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I0a9327b8cf5508482f057342783252112cb44170
2020-02-05vppinfra: numa vector placement supportDave Barach4-16/+100
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I7e7d95a089dd849c1f01ecea84529d8dbf239f21
2020-01-30vppinfra: improve clocks_per_second convergenceDave Barach1-3/+7
Apply exponential smoothing to the clock rate update calculation in clib_time_verify_frequency(), with a half-life of 1 minute and a sampling frequency of 16 seconds. Within 5 minutes or so, the calculation converges With each rate recalculation: reset total_cpu_time based on the kernel timebase delta since vpp started, and the new clock rate Improve the "show clock [verbose]" debug CLI command. BFD echo + echo fail tests marked off until the BFD code can be reworked a bit. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I24e88a78819b12867736c875067b386ef6115c5c
2020-01-07vlib: fix coverity warning / real bugDave Barach1-1/+1
The path must be next-to-impossible to hit, because the code has been wrong for at least 5 years. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I23b8c4e1631827e7931f353c561c1e19c596c598
2019-12-17misc: don't os_exit(1) causing core on SIGINTChristian E. Hopps1-1/+5
It's not typical for a program to core when it receives a SIGINT, so keep this from happening. Type: fix Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: I2c15985a57e6ea898ff05c4001e4b30b41154eba
2019-12-17vlib: add max-size configuration parameter for pmallocjieqiang wang1-0/+3
Enable 'max-size' configuration parameter to set maximum size of memory space allocated for pmalloc module. This parameter along with existing 'base-addr' falls into physmem section. Both are dedicated parameters to pmalloc module. Type: feature Change-Id: I939f25156b9a43440a24d69a7397d57eb6c2d392 Signed-off-by: Jieqiang Wang <Jieqiang.Wang@arm.com>
2019-12-17vlib: fix startup-config-process stack overflowGordonNoonan1-0/+1
Type: fix Startup config setting an i40e/ice interface up in Debug VPP consumes more than the currently available stack space. Signed-off-by: GordonNoonan <gordon.noonan@intel.com> Change-Id: I98b52c5596799017b97f802a8661b76cd1bb3245
2019-12-17vlib: fix an issue with show pciVratko Polak1-1/+1
The fix has been received over e-mail from Lijian Zhang. https://lists.fd.io/g/vpp-dev/message/14808 Type: fix Ticket: VPP-1805 Change-Id: I73e5fe7dcbe2b0b1c639d844f29183eab3b6dd66 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-12-17vlib: fix vector-as-C-string overflowBenoît Ganne2-3/+3
Type: fix Change-Id: If0419ff1a82d45e5b3326973008e1b9feb290c5a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-12vlib: fix "<command> help"Dave Barach1-13/+9
Walk the sub_commands vector directly. Type: fix Fixes: 6b3f25caff262b536a5449ac5461dd041c92a655 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I3022b39e5a739647ec68effc6756166ce2da85b6
2019-12-09vlib: improve test coverageDave Barach5-181/+25
Add tests. Remove unused rule-based parser code. Type: test Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I3ca3a9dd9da8ee8f3a47004c98f2f5644db10057
2019-12-05classify: vpp packet tracer supportDave Barach3-1/+58
Configure n-tuple classifier filters which apply to the vpp packet tracer. Update the documentation to reflect the new feature. Add a test vector. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Iefa911716c670fc12e4825b937b62044433fec36
2019-11-27vlib: add 'wait' cli commandPaul Vinciguerra1-0/+40
When running exec scripts, there can be a need to wait between statements. Type: feature Change-Id: I2a45b390697e09fc222358c9354f28e3368a06ba Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-11-27misc: add address sanitizer heap instrumentationBenoît Ganne2-4/+4
Introduce AddressSanitizer support: https://github.com/google/sanitizers/ This starts with heap instrumentation. vlib_buffer, bihash and stack instrumentation should follow. Type: feature Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884 Signed-off-by: Benoît Ganne <bganne@cisco.com>