summaryrefslogtreecommitdiffstats
path: root/src/vlib
AgeCommit message (Collapse)AuthorFilesLines
2017-05-22vhost: migrate to use device infra for worker thread assignment, rx-mode.Steven1-10/+1
and add adaptive mode support to receive queue - Migrate vhost to use device infra which does the interface/queue to worker thread assignment. - Retire vhost thread CLI and corresponding code which assigns interface/queue to worker thread. set interface placement should be used instead to customize the interface/queue to worker thread assignment. - Retire vhost interrupt/polling option when creating vhost-user interface. Instead, set interface rx-mode should be used. - Add code in vnet_device_input_unassign_thread to change the node state to interrupt if the last polling interface has left the worker thread for the device of the corresponding interface/queue. - Add adaptive mode support. The node state is set to interrupt initially. When the scheduler detects a burst of traffic, it switches the input node to polling. Then we inform the device that we don't need interrupt notification. When the traffic subsides, the scheduler switches the input node back to interrupt. Then we immediately tell the driver that we want interrupt notification again. - Remove some duplicate code in vlib/main.c Change-Id: Id19bb1b9e50e6521c6464f470f5825c26924d3a8 Signed-off-by: Steven <sluong@cisco.com>
2017-05-16VPP-845: add configurable elog post-mortem dumpDave Barach3-4/+28
Off by default. Enable via cmdline "... vlib { elog-post-mortem-dump } ..." Change-Id: I2056b9de9b37475f2bfeeb5404da838f1b42645a Signed-off-by: Dave Barach <dave@barachs.net>
2017-05-10completelly deprecate os_get_cpu_number, replace new occurencesDamjan Marion4-14/+5
Change-Id: I82c663bc0866c6c68ba354104b0bb059387f4b9d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-09Fix remaining 32-bit compile issuesDamjan Marion1-1/+1
Change-Id: I9664214652229b663c3e3ba7406b4ede96bfb123 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-08vlib: do not unbind devices already bound to vfio-pciDamjan Marion1-0/+5
Change-Id: I739bed5b9d9504d18ee88206e29ebc4ba1b47d28 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-03Fix vnet unit testsFilip Tehlar1-0/+12
Change-Id: Ibe55e4399c6b78d83268d7c49ed498cab7bfdb43 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-26Exit if plugin load attempt failDamjan Marion1-6/+2
This happens mainly if plugin contains unresolved symbol. Such situation typically leads on crash a bit later so it is better to exit immediatelly and display meaningful error message. Change-Id: I4abd9a9089a4863400bf609e8d3fd7cebab92913 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-25Fix structure alignment with 32-bit pointersDamjan Marion1-0/+4
Change-Id: I740de6c0f12dab452b4349e3bf89ff976a6268c0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-21vlib: add cli command to dump all CLI commandsDamjan Marion1-0/+49
To be used for bash completion Change-Id: I8f4702f24c2b7e223945e00a1b3560dec6ef39fd Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-11Fix typo in minimal epoll polling timePierre Pfister1-1/+1
epoll was supposed to not sleep when timeout is less than 1ms, but a typo made it not sleep any time the requested timeout is lower than 1000 seconds (in practice, never...). This patch replaces "1e3" with "1e-3", which represents 1ms. Change-Id: I731851b27a6bf6ab8e41586e017e94b962b09bf3 Signed-off-by: Pierre Pfister <ppfister@cisco.com> (cherry picked from commit ec06222ae189fe8d84b63410130fff04bf446573)
2017-04-10Common device-input interrupt infraDamjan Marion1-0/+14
Change-Id: I23b588eb56a3f5690158449a1f9bc8053cd3d251 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion16-116/+94
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-04vlib: make vlib_node_interrupt_pending(...) thread safeDamjan Marion3-5/+22
Change-Id: I24577bd32ae23fbe8515cc8d960eab5448ce3b5c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-01Clean up event log merge codeDave Barach1-1/+1
Fix a decade-old ridiculous qsort function bug. Managed to subtract floating-point numbers as if they were integers, leading to manufactured time-paradoxes. That completely confuses g2, leading to the summary disappearance of entire tracks' worth of data at high zoom levels. Add a manual alignment tweak parameter to elog_merge, users can dial-out time paradoxes caused by NTP-grade clock synchronization. The event-logger has a precision of O(100ns), whereas NTP synchronization is O(1ms). Change-Id: I69dedabaa314f69f9df74ec9ee66e21e6c87f703 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-31vlib: extend foreach_vlib_main macro to assert if workers are not parkedDamjan Marion2-12/+27
Change-Id: I6ff7b65a400734a47bc0a7d03faf86ef1cf4f8c8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-28vlib: inline dispatch_node(...) (again)Damjan Marion2-11/+2
Worker main loop is now shared code with main thread main loop so no need to export functions anymore. Change-Id: I99ee2eee981c1b88ca31d20eabeb6c21d030a34d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-22vlib: add description field in plugin registrationDamjan Marion2-5/+10
Change-Id: I88b322a5d602f3d6d3310e971479180a89430e0e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-22vhost: support interrupt modeSteven1-5/+8
vhost currently supports only polling mode. This patch is to add interrupt mode. When the interface is configured for interrupt mode, our input node does not get called unless there is a packet in the vring. If a particular CPU has one interface configured for polling mode and another in interrupt, the input node is set to polling for that CPU. This diffs also includes two crashes in vlib's dispatch_node. One is included in https://gerrit.fd.io/r/#/c/5516. The other crash is in the ASSERT. The ASSERT can become true when the caller of dispatch_node is in a loop. The first call converted the node to polling. The second call thereafter will hit the ASSERT. Change-Id: If17b6d48b20d7d8605c6a161459828637173cd32 Signed-off-by: Steven <sluong@cisco.com>
2017-03-20vnet: add device-input threadplacement infraDamjan Marion1-10/+4
This change adds two new debug CLI command: - "show interface placmenet" to display which thread (main or worker) is responsible for processing interface rx queue vpp# show interface placement Thread 0 (vpp_main): node af-packet-input: host-vpp1 queue 0 Thread 1 (vpp_wk_0): node af-packet-input: host-virbr0 queue 0 Thread 2 (vpp_wk_1): node af-packet-input: host-vpp2 queue 0 host-lxcbr0 queue 0 - "set interface placmenet" to assign thread (main or worker) which process specific interface rx queue vpp# set interface placement host-vpp1 queue 0 main Change-Id: Id4dd00cf2b05e10fae2125ac7cb4411b446c5e9c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-1764 bit per-thread countersNeale Ranns2-172/+101
after: TenGigabitEthernet5/0/1-output active 107522 17375708 0 7.22e0 161.60 TenGigabitEthernet5/0/1-tx active 107522 17375708 0 6.93e1 161.60 ip4-input-no-checksum active 107522 17375708 0 2.52e1 161.60 ip4-lookup active 107522 17375708 0 3.10e1 161.60 ip4-rewrite active 107522 17375708 0 2.52e1 161.60 before TenGigabitEthernet5/0/1-output active 433575 110995200 0 6.95e0 256.00 TenGigabitEthernet5/0/1-tx active 433575 110995200 0 7.14e1 256.00 ip4-input-no-checksum active 433575 110995200 0 2.66e1 256.00 ip4-lookup active 433575 110995200 0 3.29e1 256.00 ip4-rewrite active 433575 110995200 0 2.59e1 256.00 Change-Id: I46405bd22189f48a39f06e3443bb7e13f410b539 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17vlib: fix potential crash in dispatch_node ELOG_DATA callSteven1-2/+11
dispatch_node may be invoked from vlib main or worker threads. The call to ELOG_DATA in dispatch_node passes the parameter &vm->elog_main. It works fine when dispatch_node is invoked from the main thread. It does bad thing when it is invoked from the worker thread. While we are at it, make two additional enhancements to the same area. 1. Use ELOG_TRACK_DATA instead of ELOG_DATA to enhance g2 viewer presentation. 2. Since ELOG_DATA is in the data path, it could get very chatty. Make the call to ELOG_TRACK_DATA conditional compile. Change-Id: I80ca0eea10bc1e5d0d5549f9844dd9a34dbb65a2 Signed-off-by: Steven <sluong@cisco.com>
2017-03-16vlib: additional runtime_data checksDamjan Marion1-8/+14
Change-Id: I9b6ed9741fae89bdefa6f601398eb63a21155069 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-16vlib: make runtime_data thread-localDamjan Marion5-45/+103
Change-Id: I4aa3e7e42fb81211de1aed07dc7befee87a1e18b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-15No vector allocation during buffer copyNeale Ranns1-4/+1
Change-Id: I7e8556af833ca0e00fadc96dcd2077ff1104541b Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-14vlib: poll pre_input nodes only on main threadDamjan Marion1-6/+7
Change-Id: I61464fd1610a9754693f31edd72f9fa1b6926511 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-10Retire vpp_liteDamjan Marion1-0/+6
vpp_lite platform is not needed anymore as same efect can be achieved with following startup.conf config: plugins { plugin dpdk_plugin.so { disable } } Change-Id: I690ea8ceb1c6e1fe32e01e7da54e9958019a93bf Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-10vlib: deduplicatee code in main and worker main loopDamjan Marion4-142/+116
Change-Id: Id18d59c9442602633a6310b2001a95bce8b6b232 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-09vlib_mains == 0 special cases be goneDave Barach6-55/+65
Clean up spurious binary API client link dependency on libvlib.so, which managed to hide behind vlib_mains == 0 checks reached by VLIB_xxx_FUNCTION macros. Change-Id: I5df1f8ab07dca1944250e643ccf06e60a8462325 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-08vlib: add process restart cliDamjan Marion1-0/+20
Change-Id: I8b81e53ebea573b4edb17aca7e1c284f3984e399 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-06Add support for unix { coredump-size <size> }.Klement Sekera1-0/+22
Use setrlimit to set the core size limit if the argument is passed to vpp. Change-Id: Ie76c082b2af81337310fcb1925af915a42067f15 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-02Clean up binary api message handler registration issuesDave Barach1-7/+24
Removed a fair number of "BUG" message handlers, due to conflicts with actual message handlers in api_format.c. Vpp itself had no business receiving certain messages, up to the point where we started building in relevant code from vpp_api_test. Eliminated all but one duplicate registration complaint. That one needs attention from the vxlan team since the duplicated handlers have diverged. Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-01VPP-598: tcp stack initial commitDave Barach2-1/+69
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-01Fix buffer template copyDave Barach2-5/+30
Change-Id: If451c9cb68719fc816999b0330b9be3a0169176a Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-28vlib: add buffer cloning supportDamjan Marion3-200/+171
Change-Id: I50070611af15b2b4cc29664a8bee4f821ac3c835 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-27vlib: add VLIB_BUFFER_EXT_HDR_VALID flagDamjan Marion1-0/+2
Change-Id: If56c66dd12eded1cc997087de5fd1b975766c4e2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-26Load plugins in alphabetical orderDave Barach1-9/+55
API traces contain absolute message numbers. Loading plugins in directory (vs. alphabetical) order makes trace replay fragile. Change-Id: I46b3a3b6a9843a383d42269fca0cf5a789486eaf Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-24VPP-650: handle buffer failure in vlib_buffer_copy(...)Dave Barach1-1/+10
Change-Id: I6aac48d780fcd935818221044eae50067f225175 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall3-34/+80
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22fix trace frame-queue unformat of indexMatus Fabian1-1/+1
Change-Id: Id891af5ef3c4afe877282b34cd03fc43886940a3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-02-07VPP-630: Null pointer dereferences in vlib/unix/plugin.cOle Troan1-1/+1
Change-Id: Iafb071c684a43e21925e3a43019cd86372347898 Signed-off-by: Ole Troan <ot@cisco.com>
2017-02-06vlib: remove algned/unaligned buffers schemeDamjan Marion4-250/+39
Change-Id: I4433eaed3f4e201edc329c4842cbbf74beb19a9a Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-05fix some 'stored but never read' warnings raised by clangGabriel Ganne2-6/+7
found by `scan-build make plugins-release` Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com> Change-Id: I52048e3a8ae3fb85eb3d91f6a5e15216dd7b9baa
2017-02-03Plugin infrastructure improvementsDamjan Marion3-60/+318
This patch replaces requirement for vlib_plugin_register function in the plugin so file and introduces new macro: VLIB_PLUGIN_REGISTER () = { .version = "version string", .version_required = "requred version", .default_disabled = 1, .early_init = "early_init_function_name", }; Plugin will nor be loaded if .default_disabled is set to 1 unless explicitely enabled in startup.conf. If .verstion_required is set, plugin will not be loaded if there is version mismatch between plugin and vpp. This can be bypassed by setting "skip-version-check" for specific plugin. If .early-init string is present, plugin loader will try to resolve this specific symbol in the plugin namespace and make a function call. Following startup.conf configuration is added: plugins { path /path/to/plugin/directory plugin ila_plugin.so { enable skip-version-check } plugin acl_plugin.so { disable } } Change-Id: I706c691dd34d94ffe9e02b59831af8859a95f061 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-25[re]Enable per-Adjacency/neighbour countersNeale Ranns1-0/+14
Change-Id: I953b3888bbc6d8a5f53f684a5edc8742b382f323 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-23binary-api debug CLI works with pluginsDave Barach1-2/+7
Change-Id: I81f33f5153d5afac94b66b5a8cb91da77463af79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-01-17dpdk: remove duplicate code in buffers.cDamjan Marion2-52/+69
Change-Id: Idc17b4a32d40012556d5d8550942db0372ebf23d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-14vlib: add buffer and thread callbacksDamjan Marion9-818/+469
Change-Id: I8e2e8f94a884ab2f9909d0c83ba00edd38cdab77 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-07plugin: add API to get pointer to symbol in different pluginDamjan Marion2-7/+26
Change-Id: Ic2fbbd8227d5d0c033e5d7b5f43b859a4889d2f3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-03vlib: merge libvlib_unix.so into libvlib.soDamjan Marion1-1/+1
Change-Id: Iedbee427d838794c4b26db5bd07b8d27aad9fcd8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion63-0/+29819
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>