aboutsummaryrefslogtreecommitdiffstats
path: root/src/vlibmemory
AgeCommit message (Collapse)AuthorFilesLines
2019-10-25dhcp: fix crash on unicast renewal sendNeale Ranns1-0/+1
Type: fix - when the addresses were learnt a copy of the client was sent to the main thread, this meant the unicast adjacecny was saved on the copy not on the original. - Add logging. - Improve the proxy-node that hands the clint packets so the DHCP packets are traced. - allow a renewal to configure new address data Change-Id: I6ab0afcccbc4a1cdefdd1b8beeda8fc7ba20ec1f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-09api: comment, simplify and fix api socket readVratko Polak1-48/+80
The function vl_socket_read_ready did contain some comments already, but as they stated, the logic has to be tricky to cover multiple cases. Comment: + Add function-level comment + Add comments to describe some of local variables + Add many comments to describe internal state at particular lines. Simplify: + Remov mbp_set as it is never needed. + Replace msg_len with msgbuf_len to save "+ sizeof (msgbuf_t)". Improve: + Early exit on EAGAIN. Fix: + "n" now only tracks input_buffer. Previously, it was entering the detection of additional messages even for unprocessed_input. + Set up msg_buffer (including appending to unprocessed_input) outside full-message-detection loop now, so it cannot be executed multiple times as before. Type: fix Ticket: VPP-1785 Change-Id: I256e34b435be06844458744a13ea37a0e86a96f9 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-10-08api: add bapi thread handle to api main structure.IJsbrand Wijnands1-1/+9
Adding the thread handle to the api main structure allows the client process of the bin api to manage the thread, like setting the thread name for example. Type: feature Change-Id: I38b58ddc83d5958c4bda76eadd371eee1545724b Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
2019-10-02vlib: improve summary vector-rate statisticsDave Barach1-1/+1
Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I4b77879b0a84fdec3c1518a972cf003d5135222d Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-30api: fix use-after-freeBenoît Ganne1-3/+3
Type: fix Change-Id: I2a599c22d5770587fdd419e5d212c8527054d2e9 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-16api: autogenerate api trace print/endianOle Troan1-1/+2
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files. In two formats, "custom-dump" and "dump". "dump" gives a human friendly list, and "custom-dump" is meant to give a list of commands that can be fed to VAT. This patch only deals with "dump". Prior to this fix, auto-generation was only done for the basic types. This fix adds support for any type, including lists, and supports pretty-printing of enums, strings, IP addresses, MAC addresses and so on. Usage: api trace dump <api-trace-file> For example Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40 ---------- trace 48 ----------- vl_api_sw_interface_set_flags_t: _vl_msg_id: 75 client_index: 0 context: 10 sw_if_index: 1 flags: IF_STATUS_API_FLAG_ADMIN_UP ---------- trace 49 ----------- vl_api_sw_interface_add_del_address_t: _vl_msg_id: 88 client_index: 0 context: 11 sw_if_index: 1 is_add: 1 del_all: 0 prefix: 172.16.1.1/24 ---------- trace 51 ----------- vl_api_cli_inband_t: _vl_msg_id: 819 client_index: 0 context: 13 cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable ---------- trace 58 ----------- vl_api_ip_neighbor_add_del_t: _vl_msg_id: 199 client_index: 0 context: 20 is_add: 1 neighbor: sw_if_index: 2 flags: IP_API_NEIGHBOR_FLAG_NONE mac_address: 0202.0000.ff02 ip_address: fd01:2::2 Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1 Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-04api: memclnt api use string type.Ole Troan1-6/+6
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Idad79286b7730c8e85202c4b8e675ea50f8bbc48 Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-27api: revert use string type for strings in memclnt.apiOle Troan6-35/+28
This reverts commit 2959d42feb576c0e00c28c4e27658b25f6c783e9. Lacks client side fixes. Type: fix Change-Id: Ib94b18e74325cede41ed1733e57896f17a952526 Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-27api: use string type for strings in memclnt.apiOle Troan6-28/+35
Explicitly using string type in API allows for autogenerating tools to print strings instead of hex-dumping byte strings. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I573962d6b34d5d10aab9dc6a5fdf101c9b12a6a6 Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-20vppapigen: remove support for legacy typedefsPaul Vinciguerra1-1/+1
vppapigen has remapped legacy to typedefs behind the scenes for some time now. - update .api files to use new style typedefs. - issue error on 'typeonly define' in .api files - remove unneeded macros redefining vl_noop_handler Type: refactor Change-Id: I7a8c4a6dafacee6a131f95cd0e9b03a8c60dea8b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-08-08api: vppapitrace JSON/API trace converterOle Troan3-56/+38
usage: vppapitrace.py [-h] [--debug] [--apidir APIDIR] {convert,replay} ... optional arguments: -h, --help show this help message and exit --debug enable debug mode --apidir APIDIR Location of JSON API definitions subcommands: valid subcommands {convert,replay} additional help convert Convert API trace to JSON or Python and back replay Replay messages to running VPP instance To convert an API trace file to JSON: vppapitrace convert /tmp/api.trace trace.json To convert an (edited) JSON file back to API trace for replay: vppapitrace convert trace.json api-edited.trace To generate a Python file that can be replayed: vppapitrace convert /tmp/api.trace trace.py vppapitrace convert trace.json trace.py Replay it to a running VPP instance: vppapitrace replay --socket /tmp/api.trace In VPP that file can be replayed with: vpp# api trace replay api-edited.trace This patch also modifies the API binary trace format, to include the message id to message name table. Change-Id: Ie6441efb53c1c93c9f778f6ae9c1758bccc8dd87 Type: refactor Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-08api: api socket respect unix runtime directoryOle Troan2-20/+12
socksvr {} should respect the unix runtime directory. Default is now /run/vpp/api.sock The 'default' keyword is deprecated. The user is responsible for creating directories outside of the unix runtime directory. Not yet done: Exit VPP when socket cannot be opened. (currently only process exits). Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I6dd66ed58a3d7e02674dfa16d72c1d7bba07b79e
2019-08-02vppinfra: Expose function setting __os_thread_indexNathan Skrzypczak1-20/+1
Type: feature This is needed when creating pthreads in client applications, they need a way to set __os_thread_index per thread that does not conflict with the binary API thread index. If __os_thread_index is left to 0 in two client pthreads and they call vl_msg_api_alloc and vec_resize at the same time it can fail due to them sharing (and push/poping) the same clib_per_cpu_mheaps slot. Change-Id: I85d4248a39b641a4d3ad5a1c1bd6e0db5875fab6 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-07-24api: Disable tracing of memclnt_keepalive messagesDave Barach1-6/+11
A waste of binary API trace space; an otherwise idle control-plane will eventually fill the api trace buffer with them. Type: fix Ticket: VPP-1725 Change-Id: Id8338ea4070cd76481595005986efc558f0694e6 Signed-off-by: Dave Barach <dave@barachs.net> (cherry picked from commit 996a757ff93233379bf0a464dce6d99f5d622ca4)
2019-07-16api: enable binary API event logging in vatDave Barach1-1/+22
Cleaned up a few instances of side-bet elog_string hash table usage. Elog_string handles that problem itself. Add cli commands to vat to initialize, enable/disable, and save an event log. Event logging at the same time in both vpp and vat yields a pair of event logs which can be merged by the "test_elog" tool. Type: refactor Change-Id: I8d6a72206f2309c967ea1630077fba31aef47f93 Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-03api: remove garbage from sockclnt_create replyVratko Polak3-2/+25
The fix uses memset to zero after alloc, as sizing of source string is not obvious. Function vl_msg_api_alloc_zero is added (and used), so similar bugs can be fixed easily. Type: fix Ticket: VPP-1716 Change-Id: I3b20040d0de4222686c58779f2c0af78c5543504 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-06-14api: add mp-safe/barrier-sync indication to elogsDave Barach1-0/+1
Costs nothing, and leaves nothing to the imagination. Type: fix Change-Id: I7c9f9fb9325475c268eca062da7bbbf014438cfc Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-12infra: fix minor memory leak in "api trace..."Dave Barach1-5/+8
Build api trace message print fns into the built-in copy of api_format.c Optimize memory allocator behavior when the api trace wraps. Type: Fix Change-Id: If799d8784a459f981fc9ee3a3ca03d3f63b2bcd0 Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-16init / exit function orderingDave Barach3-10/+7
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-09bapi: separate init shm reply from fd exchangeFlorin Coras1-1/+17
Wait for init shm reply to be consumed before sending fd over the socket. Change-Id: I5cd0246d8debcc3c8a163b7e2dd400ca0050a2fb Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-04-23API: Python and Unix domain socket improvementOle Troan2-4/+2
Handle the case where buffer overflows. Then SOCK_SEQPACKET assumption that multiple API messages are not returned by recv() is broken. Use SOCK_STREAM for API exchanges instead. Add support for running tests over sockets. make test SOCKET=1 Change-Id: Ibe5fd69b1bf617de4c7ba6cce0a7c2b3f97a2821 Signed-off-by: Ole Troan <ot@cisco.com>
2019-04-16API: Handle pthread cond signal case where signal is missed.Ole Troan1-2/+2
Especially on a single core setup the RX thread could signal the main thread that it was done, before main thread listened to the signal. Change-Id: Ib70337b21bcf77787ce4ee0aa9cf80c6da2215af Signed-off-by: Ole Troan <ot@cisco.com>
2019-04-10API: Fix shared memory only action handlers.Ole Troan2-1/+1
Some API action handlers called vl_msg_ai_send_shmem() directly. That breaks Unix domain socket API transport. A couple (bond / vhost) also tried to send a sw_interface_event directly, but did not send the message to all that had registred interest. That scheme never worked correctly. Refactored and improved the interface event code. Change-Id: Idb90edfd8703c6ae593b36b4eeb4d3ed7da5c808 Signed-off-by: Ole Troan <ot@cisco.com>
2019-04-05make the output of "show api dump file <filename> compare-current" ↵Andrew Yourtchenko1-5/+9
doxygen-friendly The current output of the API diff requires some massaging to appear like a table in the docs generated by doxygen. This change eliminates this need. Change-Id: Ic9269a0e5e232e4d01a0695561e4f90eee287327 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-04-05vlib: fix "foo_msg" and "foo_msg_reply" in API message table triggering the ↵Andrew Yourtchenko1-2/+2
"defininion changed" output strncmp() succeeds if the i+1th message is "foo_reply", because the comparison terminates early after "foo" - which triggers the "definition changed" rather than "only in ..." message. Fix also the case where i+1th element does not exist. Change-Id: I127136410491d9dd102e160fd831fcf6f0bd3a9f Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-03-21api trace: cli bug fixezkexma1-2/+2
vpp/src/vlibmemory/vlib_api_cli.c Fixing the help string for the "set api-trace" command. Change-Id: I70f85a4f55466d2cc01018c4ad8cbe8332dbb925 Signed-off-by: ezkexma <maqi.z.ke@ericsson.com>
2019-03-07vlibmemory: coverity woesSteven Luong1-1/+1
Coverity complains about resource leak after open when fd gets 0 with below warning. off_by_one: Testing whether handle tfd is strictly greater than zero is suspicious. tfd leaks when it is zero. It is right. 0 is a valid fd. -1 is not. Change-Id: I22c2eb75b99bb6209921b9f874190cbbdf10e6ce Signed-off-by: Steven Luong <sluong@cisco.com>
2019-02-26VPP-1574: minimize RPC barrier sync callsDave Barach1-3/+20
Grab the thread barrier across a set of RPCs, to greatly increase efficiency. Avoids running afoul of the barrier sync holddown timer. Change-Id: I782dfdb1bed398b290169c83266681c9edd57a3f Signed-off-by: Dave Barach <dave@barachs.net>
2019-02-21API: client does not set root permissions on shm segmentNeale Ranns1-4/+2
Change-Id: I4ba099832b646392c1b6fa34236ca3377c9f786c Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-05sock api: allow to start client with no rx_threadTomasz Kulasek4-4/+33
Change-Id: Ia30ff1e62304e65f27497ce05f8e40631c06d69e Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
2019-01-23Initialize gc_mark_timestamp to zero to avoid garbage values.Brian Nesbitt1-0/+1
Change-Id: Ib3f030e906da9828fdad27e19b9efb0c349b0734 Signed-off-by: Brian Nesbitt <brian.nesbitt@owmobility.com>
2019-01-05socket API: Use pool index instead of handle in sock_delete handlerOle Troan1-1/+1
The socket API used the socket index handle directly in the sock_delete handler, resulting in "unknown client id" warnings, and a failure in return for socket clients. Change-Id: Ia69f740ce0f834cd9b62b7157243a1f42bcad765 Signed-off-by: Ole Troan <ot@cisco.com>
2019-01-02Fixes for buliding for 32bit targets:David Johnson1-4/+4
* u32/u64/uword mismatches * pointer-to-int fixes * printf formatting issues * issues with incorrect "ULL" and related suffixes * structure alignment and padding issues Change-Id: I70b989007758755fe8211c074f651150680f60b4 Signed-off-by: David Johnson <davijoh3@cisco.com>
2018-12-31binary api clients: wait for vpp to startDave Barach1-0/+29
Change-Id: I740a7423327b724e88fdfa35d90cb1285e9f9746 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-12-22bapi/vat: fix socket transport for vatFlorin Coras1-2/+9
Change-Id: I8e39df129f80c8d3d73181fc5d3ac60ae382a6b6 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-12-05bapi: add options to have vpp cleanup client registrationFlorin Coras4-20/+28
A client can send a memclnt delete message and ask vpp to cleanup the shared memory queue. Obviously, in this case no delete reply is sent back to the client. Change-Id: I9c8375093f8607680ad498a6bed0690ba02a7c3b Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-12-03vcl: handle worker process exitFlorin Coras2-7/+15
Change-Id: Ife05d25fd736ae3064f01e974e5aecc5b48de924 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-12-01Delete shared memory segment files when vpp startsDave Barach1-0/+22
Should have been done this way years ago. My bad. Change-Id: Ic7bf937fb6c4dc5c1b6ae64f2ecf8608b62e7039 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-18Complain if a client binary API queue is fullDave Barach1-0/+8
Definitely indicates a client binary API queue handling issue. We can't simply turf the message, or we'll end up with a more subtle derivative misbehavior. Change-Id: I6363fda1430b0a9ec33ad69badc1e0072fe20fa8 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach3-5/+5
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-13vlib rename vlib_frame_args(...) to vlib_frame_scalar_args(..)Damjan Marion1-2/+2
Typically we have scalar_size == 0, so it doesn't matter but vlib_frame_args was providing pointer to scalar frame data, not vector data. To avoid future confusion function is renamed to vlib_frame_scalar_args(...) Change-Id: I48b75523b46d487feea24f3f3cb10c528dde516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-01Move RPC calls off the binary API input queueDave Barach3-29/+50
Change-Id: I2476e3e916a42b41d1e66bfc1ec4f8c4264c1720 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-10-25Revert "Keep RPC traffic off the shared-memory API queue"Florin Coras3-38/+29
This reverts commit 71615399e194847d7833b744caedab9b841733e5. There seems to be an issue with ARPs when running with multiple workers. Change-Id: Iaa68081512362945a9caf24dcb8d70fc7c5b75df Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-24Keep RPC traffic off the shared-memory API queueDave Barach3-29/+38
Change-Id: Ib5c346641463768cf33eaf8cb5fab5b63171398d Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach7-30/+30
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-03sock api: fix registrations and client readsFlorin Coras5-28/+69
- When clients connect, instead of returing registration indicies return handles. By convention socket registrations will have the MSB set to 1. This makes it easy to distinguish them from shm registrations. - Fix client reads to allow for messages larger than 4kB (needed for the creat reply wherein the message table is provided). Change-Id: I7bc0a072d066dffbf2e3ad9ba3ed50291231af9d Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-02PAPI: Use UNIX domain sockets instead of shared memoryOle Troan5-39/+94
Adds support for running the API purely across Unix domain sockets. Usage: vpp = VPP(use_socket=True) Change-Id: Iafc1301e03dd3edc3f4d702dd6c0b98d3b50b69e Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-19socket api: do not delay sending of messagesFlorin Coras2-64/+35
Instead of relying on main epoll loop to send messages, try to send as soon as possible. Change-Id: I27c0b4076f3599ad6e968df4746881a6717d4299 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-11remove libvlib from libvlibmemoryclient libsMatthew Smith1-1/+1
On CentOS 7, having libvlibmemoryclient link libvlib causes a SEGV when a program or library is run which links against libvlibmemoryclient and dlopen() is called. This is because dlopen() executes any functions with __attribute((constructor)) set. The VLIB_CLI_COMMAND macro creates CLI registration functions that have this attribute set. So CLI registration functions end up being run by applications which are clients of the VPP API. This doesn't occur on ubuntu 16.04, because ld seems to omit shared libraries that were listed on the command line if they are not used to resolve any symbols. Removing the link to libvlib on vlibmemoryclient to fix this problem results in another problem. Tests of libvcl_preload fail when running 'make test'. This happens because libvcl_preload calls dlopen but does not link against libdl. When libvlibmemoryclient had libvlib linked, these errors did not occur since libvlib links libdl. Adjusted the build of libvcl_preload to explicitly link libdl. Change-Id: I271ba2f9226ce1602e1f6c1525f3b093bb0345ed Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-08-26cmake: add add_vpp_library and add_vpp_executable macrosDamjan Marion1-14/+13
Change-Id: I1382021a6f616571b4b3243ba8c8999239d10815 Signed-off-by: Damjan Marion <damarion@cisco.com>