summaryrefslogtreecommitdiffstats
path: root/src/vnet.am
AgeCommit message (Collapse)AuthorFilesLines
2018-01-24SCTP stack (RFC4960)Marco Varlese1-0/+19
== CONTENT == * SCTP chunks definition as per RFC4960; * Helper functions to set/get values to/from the corresponding chunks; * Hooks to the session/application layers; * Complete state-machine handling; * Implementation for unexpected chunk received in a certain state (state-machine error handling) * Support for 1-single connection; * Sample application to test receive/transmit data-path; * Test to validate SCTP stack; Change-Id: I1b55c455ab400be9513f4e094dadfc3181d2ebc9 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-01-23For DHCP client configuration control the setting of the broadcast flag in theNeale Ranns1-1/+1
DISCOVER message sent. According to RFC2131: In the case of a client using DHCP for initial configuration (before the client's TCP/IP software has been completely configured), DHCP requires creative use of the client's TCP/IP software and liberal interpretation of RFC 1122. The TCP/IP software SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured; DHCP servers and BOOTP relay agents may not be able to deliver DHCP messages to clients that cannot accept hardware unicast datagrams before the TCP/IP software is configured. To work around some clients that cannot accept IP unicast datagrams before the TCP/IP software is configured as discussed in the previous paragraph, DHCP uses the 'flags' field [21]. The leftmost bit is defined as the BROADCAST (B) flag. The semantics of this flag are discussed in section 4.1 of this document. The remaining bits of the flags field are reserved for future use. They MUST be set to zero by clients and ignored by servers and relay agents. Figure 2 gives the format of the 'flags' field. this changes means VPP conforms to the: "SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured" with the caveat that VPP allows DHCP packets destined to the stanard client DHCP port to be delivered. With this enhancement the control-plane is now able to choose the setting of the broadcast flag. Change-Id: Ia4eb2c9bb1e30c29f9192facc645e9533641955a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-15svm: refactor memfd and remove ssvm_ethFlorin Coras1-10/+0
Change-Id: Icde296e956eb89ea3a17d547f04a833916ec6440 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09DVR: run L3 output featuresNeale Ranns1-1/+1
- rename l2_bridged to is_dvr. Including on the ip.api this was new in the 18.01 release so no compatability issues. - steal the free space in vnet_buffer_opaque_t for use with flags. - run the ipX-output feature arc from the DVR DPO Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-18SR-MPLS: binary API and automated steeringPablo Camarillo1-2/+6
Change-Id: Iacfbaaa91ea8bd92790dec9fce567063bdbc5d64 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-12-15apps: refactor uri and update build infraFlorin Coras1-0/+15
Change-Id: Ifa9966a27586a1a65038d069cf4a1e6e21a72d45 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-09BIER in non-MPLS netowrksNeale Ranns1-1/+2
as decsribed in section 2.2 ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10 with BIFT encoding from: https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00 changes: 1 - introduce the new BIFT lookup table. BIER tables that have an associated MPLS label are added to the MPLS-FIB. Those that don't are added to the BIER table 2 - BIER routes that have no associated output MPLS label will add a BIFT label. 3 - The BIER FMask has a path-list as a member to resolve via any possible path. Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-06Restructure some files in LB to src/vnet to reuseHongjun Ni1-2/+4
Change-Id: Ic8b193e93ce18ca82b294816aa7ee0ef31d64bc2 Signed-off-by: Pierre Pfister <ppfister@cisco.com> Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-12-04tap_v2: move code to vnet/devices/tapDamjan Marion1-13/+23
virtio backend stays in vnet/devices/virtio Change-Id: Idbf04f1c645a809ed408670ba330662859fe9309 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-30tap_v2: move netlink code to separate fileDamjan Marion1-0/+2
Change-Id: Ib091875f77ea99421aec0947fd17833c4e6d2ec2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-30virtio: fast TAP interfaces with vhost-net backendDamjan Marion1-1/+11
Change-Id: Ided667356d5c6fb9648eb34685aabd6b16a598b7 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Steven Luong <sluong@cisco.com>
2017-11-28IPSec AH protocol enhancement in VPP native core“mukeshyadav1984”1-0/+3
Change-Id: Iec5804d768485f4015bbf732d8d19ef2f24e6939 Signed-off-by: “mukeshyadav1984” <mukyadav@cisco.com>
2017-11-21dpdk: add l2_hdr_offset and l3_hdr_offset in vlib_buffer_tDamjan Marion1-0/+1
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-10Break up vpe.apiNeale Ranns1-4/+16
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-10Add udp.api.h to vnet.amFlorin Coras1-1/+2
Change-Id: I77c1da7ba3770637a3414226f7ade229b8b0d216 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-11-09BIERNeale Ranns1-0/+34
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07UDP Encapsulation.Neale Ranns1-1/+6
A UDP-encap object that particiapates in the FIB graph and contributes DPO to teh output chain. It thereofre resembles a tunnel but without the interface. FIB paths (and henace routes) can then be created to egress through the UDP-encap. Said routes can have MPLS labels, hence this also allows MPLSoUPD. Encap is uni-directional. For decap, one still registers with the UDP port dispatcher. Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-05ip4 network request processingDave Barach1-0/+1
Change-Id: I6eb0681cc2595f81ac3bf5ffa3e9b2adfff04a36 Signed-off-by: Dave Barach <dave@barachs.net>
2017-11-02Add replicate DPO header to export list for VPPSBNeale Ranns1-0/+1
Change-Id: I0b437ac5fecc81c7762d9cad0f33e977fcf3aa27 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-28session: rules tablesFlorin Coras1-0/+6
This introduces 5-tuple lookup tables that may be used to implement custom session layer actions at connection establishment time (session layer perspective). The rules table build mask-match-action lookup trees that for a given 5-tuple key return the action for the first longest match. If rules overlap, ordering is established by tuple longest match with the following descending priority: remote ip, local ip, remote port, local port. At this time, the only match action supported is to forward packets to the application identified by the action. Change-Id: Icbade6fac720fa3979820d50cd7d6137f8b635c3 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko1-0/+1
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-10-19VPP-1024: rewrite buffer trajectory tracerDave Barach1-1/+2
Use a proper u16 * vector to capture node indices, since vpp w/ plugins now exceeds 255 graph nodes Change-Id: Ic48cad676fa3a6116413ddf08c083dd9660783f1 Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-16udp: refactor udp codeFlorin Coras1-1/+1
Change-Id: I44d5c9df7c49b8d4d5677c6d319033b2da3e6b80 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-13VPP-1027: DNS name resolverDave Barach1-0/+16
This patch is a plausible first-cut, suitable for initial testing by vcl (host stack client library). Main features; - recursive name resolution - multiple ip4/ip6 name servers - cache size limit enforcement - currently limited to 65K - ttl / aging - static mapping support - show / clear / debug CLI commands Binary APIs provided for the following: - add/delete name servers - enable/disable the name cache - resolve a name To Do list: - Respond to ip4/ip6 client DNS requests (vs. binary API requests) - Perf / scale tuning - map pending transaction ids to pool indices, so the cache can (greatly) exceed 65K entries - Security improvements - Use unpredictable dns transaction IDs, related to previous item - Make sure that response-packet src ip addresses match the server - Add binary APIs - deliver raw response data to clients - control recursive name resolution - Documentation Change-Id: I48c373d5c05d7108ccd814d4055caf8c75ca10b7 Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-10session: add support for application namespacingFlorin Coras1-1/+6
Applications are now provided the option to select the namespace they are to be attached to and the scope of their attachement. Application namespaces are meant to: 1) constrain the scope of communication through the network by association with source interfaces and/or fib tables that provide the source ips to be used and limit the scope of routing 2) provide a namespace local scope to session layer communication, as opposed to the global scope provided by 1). That is, sessions can be established without assistance from transport and network layers. Albeit, zero/local-host ip addresses must still be provided in session establishment messages due to existing application idiosyncrasies. This mode of communication uses shared-memory fifos (cut-through sessions) exclusively. If applications request no namespace, they are assigned to the default one, which at its turn uses the default fib. Applications can request access to both local and global scopes for a namespace. If no scope is specified, session layer defaults to the global one. When a sw_if_index is provided for a namespace, zero-ip (INADDR_ANY) binds are converted to binds to the requested interface. Change-Id: Ia0f660bbf7eec7f89673f75b4821fc7c3d58e3d1 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-0/+2
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-06Initial GENEVE TUNNEL implementation and tests.Marco Varlese1-0/+17
Notes on this first implementation: * First version of the implementation does NOT support GENEVE OPTIONS HEADER: it isn't well understood what the purpose of the OPTIONS will be and/or what content would be placed in the variable option data; Once the IETF work will evolve and further information will be available it could be possible to modify the frame rewrite to contemplate the actual GENEVE OPTIONS. Change-Id: Iddfe6f408cc45bb0800f00ce6a3e302e48a4ed52 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-10-05dpdk/ipsec: rework plus improved cli commandsSergio Gonzalez Monroy1-0/+1
This patch reworks the DPDK ipsec implementation including the cryptodev management as well as replacing new cli commands for better usability. For the data path: - The dpdk-esp-encrypt-post node is not necessary anymore. - IPv4 packets in the decrypt path are sent to ip4-input-no-checksum instead of ip4-input. The DPDK cryptodev cli commands are replaced by the following new commands: - show dpdk crypto devices - show dpdk crypto placement [verbose] - set dpdk crypto placement (<device> <thread> | auto) - clear dpdk crypto placement <device> [<thread>] - show dpdk crypto pools Change-Id: I47324517ede82d3e6e0e9f9c71c1a3433714b27b Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-10-05Distributed Virtual Router SupportNeale Ranns1-1/+2
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-23tcp: add tcp.api.h to nobase includeFlorin Coras1-1/+2
Change-Id: Idcd78a21f4f2b6c1223123b5cc50a470ccd57e83 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-21PPPoE usses a midchain adjacency stack on an interface-tx DPONeale Ranns1-1/+2
1) introduce an interface-tx DPO. This is a simple wrapper around a sw_if_index. enhance DPO stacking functions to allow per-instance next-nodes and hence allow children to stack onto the interface per-instance tx node and not on 'interface-output'. 2) update PPPoE code to use ta midchain stack on a interface-tx DPO of the encap-interface. This remove the need for pppoe_encap node (which is replaced by the adj-midchain-tx) and interface-output node is no longer used (see above). Since PPPoE encap node is no longer needed, the PPPoE seesion does not need to be retrieved in the data-path, hence the cahce misses are removed. Change-Id: Id8b40f53daa14889a9c51d802e14fed7fba4399a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-17TCP source address automationDave Barach1-0/+3
- v6 support - Non-default VRF ID collection - Break up ip source address list into CLI + API-friendly functions - Automate proxy arp / proxy nd configuration - Automate local adjacency insertion - Binary API support Change-Id: Iede31184f65cc1ec8c414447d2d60a1334e3fe15 Signed-off-by: Dave Barach <dave@barachs.net>
2017-08-10TCP proxy prototypeDave Barach1-0/+1
- Clean up internal API client registration - Add proxy server - Add a reference count to the svm fifo Change-Id: I5ace1c85497062ed412d26ae76a9e6741af1e984 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-01P2P EthernetPavel Kotucek1-0/+1
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-07-25Cleanup/refactor session layer codeFlorin Coras1-3/+6
Change-Id: Ica99e8cb919fca6b069c37c969d60e8ccc2c6bf9 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-07-05Add API support for LLDP config/interface setSteve Shin1-2/+7
Add API methods to configure LLDP and set interface to enable/disable. Also add port description TLV for LLDP. Change-Id: Ib959d488c2ab8a0069f143558871f41fcc43a5d3 Signed-off-by: Steve Shin <jonshin@cisco.com>
2017-06-08P2P Ethernet - APIPavel Kotucek1-2/+8
API for P2P Ethernet feature Change-Id: Id0280f42b9ce2428262e79c4dc309595037cd10e Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-05-10Builtin debug cli http serverDave Barach1-0/+1
Visit http://<vpp-ip>/show/interface or similar. Change-Id: I076b4661cf19d1b94bb01efdadb5849446be915e Signed-off-by: Dave Barach <dave@barachs.net>
2017-05-05First commit SR MPLSPablo Camarillo1-11/+21
Change-Id: I961685a2a0e4c314049444c64eb6ccf877c278dd Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-05-05NAT64: Move IPv6-IPv4 virtual reassembly code from MAP-T to common library ↵Matus Fabian1-0/+2
(VPP-708) Change-Id: I9ad636f80bf109ffac9ca1b6d80d5f2c31f2076a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-05-03Fix vnet unit testsFilip Tehlar1-13/+0
Change-Id: Ibe55e4399c6b78d83268d7c49ed498cab7bfdb43 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-13Session layer refactoringFlorin Coras1-0/+2
Major refactoring of the session layer api - Add attatch api for application binding to the the session layer - Simplify listen/connect calls - Update application CLI - Add transport endpoint to accept callback - Associate segment manager to application and allow for multiple binds/connects per app Additional: - svm fifo cleanup - add fifo free, format fns - add fifo offset enqueue unit test Change-Id: Id93a65047de61afc2bf3d58c9b544339c02065af Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-07MPLS McastNeale Ranns1-0/+2
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06BFD-FIB interactionsNeale Ranns1-2/+5
- single-hop BFD: attach a delegate to the appropriate adjacency - multi-hop BFD [not supported yet]: attach a delegate to the FIB entry. adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it. For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic). Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-03vnet: remove vnet/rewrite.h from vnet.amDamjan Marion1-1/+0
Change-Id: I2a1246061e57c4caae0a1a1b861c459d115860cd Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-4/+5
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-30Add vnet/rewrite.am back into exported headersNeale Ranns1-0/+1
Change-Id: I4dbd0dbd1e24bbf7c66fb9a2c055c8bc11d3817d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-30Clean up more Debian packaging symbol warningsDave Barach1-6/+2
Change-Id: I6081a38af3817f0957a2faf0e3e41afa4a74f3a4 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-27TCP/session improvementsFlorin Coras1-0/+2
- Added svm fifo flag for tracking fifo dequeue events (replaces event length). Updated all code to switch to the new scheme. - More session debugging - Fix peek index wrap - Add a trivial socket test client - Fast retransmit/cc fixes - tx and rx SACK fixes and unit testing - SRTT computation fix - remove dupack/ack burst filters - improve ack rx - improved segment rx - builtin client test code Change-Id: Ic4eb2d5ca446eb2260ccd3ccbcdaa73c64e7f4e1 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dbarach@cisco.com>
2017-03-27Mcast rewrite no memcpyNeale Ranns1-2/+1
use a 32bit mask in the adjacency to AND with the IP address and OR into the rewrite. Change-Id: I80b0f246c18fd74f3e43c5d49e25833412f34665 Signed-off-by: Neale Ranns <nranns@cisco.com>