summaryrefslogtreecommitdiffstats
path: root/src/vnet.am
AgeCommit message (Collapse)AuthorFilesLines
2017-05-05NAT64: Move IPv6-IPv4 virtual reassembly code from MAP-T to common library ↵Matus Fabian1-0/+2
(VPP-708) Change-Id: I9ad636f80bf109ffac9ca1b6d80d5f2c31f2076a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-05-03Fix vnet unit testsFilip Tehlar1-13/+0
Change-Id: Ibe55e4399c6b78d83268d7c49ed498cab7bfdb43 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-13Session layer refactoringFlorin Coras1-0/+2
Major refactoring of the session layer api - Add attatch api for application binding to the the session layer - Simplify listen/connect calls - Update application CLI - Add transport endpoint to accept callback - Associate segment manager to application and allow for multiple binds/connects per app Additional: - svm fifo cleanup - add fifo free, format fns - add fifo offset enqueue unit test Change-Id: Id93a65047de61afc2bf3d58c9b544339c02065af Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-07MPLS McastNeale Ranns1-0/+2
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06BFD-FIB interactionsNeale Ranns1-2/+5
- single-hop BFD: attach a delegate to the appropriate adjacency - multi-hop BFD [not supported yet]: attach a delegate to the FIB entry. adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it. For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic). Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-03vnet: remove vnet/rewrite.h from vnet.amDamjan Marion1-1/+0
Change-Id: I2a1246061e57c4caae0a1a1b861c459d115860cd Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-4/+5
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-30Add vnet/rewrite.am back into exported headersNeale Ranns1-0/+1
Change-Id: I4dbd0dbd1e24bbf7c66fb9a2c055c8bc11d3817d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-30Clean up more Debian packaging symbol warningsDave Barach1-6/+2
Change-Id: I6081a38af3817f0957a2faf0e3e41afa4a74f3a4 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-27TCP/session improvementsFlorin Coras1-0/+2
- Added svm fifo flag for tracking fifo dequeue events (replaces event length). Updated all code to switch to the new scheme. - More session debugging - Fix peek index wrap - Add a trivial socket test client - Fast retransmit/cc fixes - tx and rx SACK fixes and unit testing - SRTT computation fix - remove dupack/ack burst filters - improve ack rx - improved segment rx - builtin client test code Change-Id: Ic4eb2d5ca446eb2260ccd3ccbcdaa73c64e7f4e1 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dbarach@cisco.com>
2017-03-27Mcast rewrite no memcpyNeale Ranns1-2/+1
use a 32bit mask in the adjacency to AND with the IP address and OR into the rewrite. Change-Id: I80b0f246c18fd74f3e43c5d49e25833412f34665 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17MPLS performance improvments.Neale Ranns1-1/+1
1 - Quad loop lookup and label imposition. 2 - optimise imposition for the 1 label case 3 - input gets TTL from header directly (no byte swap) Change-Id: I59204c9e5d134b0df75d7afa43e360f946d1ffe7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-13VPP-659 Improve tcp/session debugging and testingFlorin Coras1-0/+2
- event-logging support for tcp and session layer - improvements to uri test code - builtin_server on port 1234 - use the CLOSEWAIT timer when we rx FIN in FIN_WAIT_2 state Change-Id: Ibc445f164b2086b20323bf89c77cffd3059f570f Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dbarach@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-10Retire vpp_liteDamjan Marion1-10/+4
vpp_lite platform is not needed anymore as same efect can be achieved with following startup.conf config: plugins { plugin dpdk_plugin.so { disable } } Change-Id: I690ea8ceb1c6e1fe32e01e7da54e9958019a93bf Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-04Export session.api.h for out-of-tree buildsAlexander Popovsky (apopovsk)1-1/+2
session.api.h is included in src/vnet/vnet_all_api_h.h since 68b0fb0c620, as such it should be added to the 'devel' package and installed for out-of-tree builds which use binary VPP API Change-Id: Ie8ad03d8df2a96cbc6913f767500d5ff34dcc915 Signed-off-by: Alexander Popovsky (apopovsk) <apopovsk@cisco.com>
2017-03-04Cleanup URI code and TCP bugfixingFlorin Coras1-0/+1
- Add CLI/API to enable session layer, by default it's disabled - Improve rcv wnd computation - Improvements to tx path - URI code cleanup - Builtin test tcp server - Improve src port allocation Change-Id: I2ace498e76a0771d4c31a8075cc14fe33d7dfa38 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-04Evolving SRv6 (Segment Routing for IPv6)Pablo Camarillo1-2/+4
Implements: 1.- SR Policies with several (weighted) SID lists 2.- Binding SID 3.- SR LocalSIDs with support for the following functions - End - End.X - End.DX6 - End.DX4 - End.DX2 - End.DT6 - End.DT2 - End.B6 - End.B6.Encaps 4.- SR Steering policies (to steer a traffic through an SR Policy) - Support for IPv6 traffic (IPv6 Encapsulation / SRH insertion) - Support for IPv4 traffic (IPv6 Encapsulation) - Support for L2 traffic (T.Insert / T.Encaps) 5.- Doxygen documentation 6.- Framework (APIs) to allow the definition of new SR LocalSID behaviors by means of plugins 7.- Sample SRv6 LocalSID plugin Change-Id: I2de3d126699d4f11f54c0f7f3b71420ea41fd389 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-03-02BFD: command line interfaceKlement Sekera1-0/+1
Implement command line interface to the BFD binary APIs. Add corresponding unit tests. Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion1-39/+2
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-01VPP-598: tcp stack initial commitDave Barach1-10/+56
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-16Consolidate DHCP v4 and V6 implementation. No functional change intendedNeale Ranns1-17/+9
The DHCP proxy and VSS information maintained by VPP is the same for v4 and v6, so we can manage this state using the same code. Packet handling is cleary different, so this is kept separate. Change-Id: I10f10cc1f7f19debcd4c4b099c6de64e56bb0c69 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21Add Overlay Network Engine APIFilip Tehlar1-0/+4
Change-Id: I6b5984df176688f0722a2888e73f05d8ed8b9310 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-13Basic support for LISP-GPE encapsulated NSH packetsFlorin Coras1-0/+2
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-02Fix SR multicast post mfib commitNeale Ranns1-1/+0
1 - use the SR policy to construct the replicate DPO. Each bucket therein is a SR tunnel. 2 - install a special mfib entry that links via this replicate 3 - forwarding is now mfib-lookup -> replicate -> sr_rewrite (per-tunnel) no need for a separate sr_replicate node. 4 - Stack the sr tunnel on the forwarding DPO of the first-hop FIB entry. no need for a second lookup post SR encap. 5 - fix some path-list lock leaks in the MFIB entry. Change-Id: I20de96ea4c4be4fae252625bde159d9c435c8315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-30add vnet/util/radix.h to nobase_include_HEADERS listGabriel Ganne1-1/+2
header is included by ip6.h and should therefore be made public Change-Id: Ieb7d14bb082d821c2f77e9204ec09d884fb2cb09 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-01-27API refactoring : policerPavel Kotucek1-2/+6
Change-Id: Ia7d8b557bcdf45eb8e33bb3d297bc6f7ad321c72 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-01-27dpdk: rework cryptodev ipsec build and setupSergio Gonzalez Monroy1-2/+2
Build Cryptodev IPsec support by default when DPDK is enabled but only build hardware Cryptodev PMDs. To enable Cryptodev support, a new startup.conf option for dpdk has been introduced 'enable-cryptodev'. During VPP init, if Cryptodev support is not enabled or not enough cryptodev resources are available then default to OpenSSL ipsec implementation. Change-Id: I5aa7e0d5c2676bdb41d775ef40364536a081956d Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-01-27API refactoring : copPavel Kotucek1-2/+6
Change-Id: I1596d7a130fb6d3b170b8e01f2116b323cc10c0d Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-4/+31
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-26API refactoring : dhcpPavel Kotucek1-2/+6
Change-Id: I3829835ed2126e51e96690c907deac623dc77151 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-01-25Move LISP cp cli to separate fileFlorin Coras1-0/+1
Change-Id: I24355c71606c047e474b2541bb274e3d183fee85 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-01-25API refactoring : flowPavel Kotucek1-2/+6
Change-Id: I99e913b954f8b02f347bfeff093856a1c5e96781 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-01-25API refactoring : classifyPavel Kotucek1-2/+6
Change-Id: Ib75197ef8e5057e7f0d9361a10705c3743d05333 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-01-16Add --without-libssl configure parameterDamjan Marion1-3/+3
This replaces --without-ipsec and --without-ipv6sr and allows other parts of the code to be disabled if libssl is not available. Change-Id: Id97ff3685a7924d7f86622952e0405d94ceb5957 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-16dpdk: register rte_delay_us callback from vnetDamjan Marion1-0/+1
Change-Id: Ibf7fc9a54d3fbee431b4814fa8abc5ba29ed9eef Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-16Define more dependencies between libsDamjan Marion1-8/+14
Change-Id: Ia74699bad15c1c583571944458fc8a5c3ded574b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-14vlib: add buffer and thread callbacksDamjan Marion1-0/+2
Change-Id: I8e2e8f94a884ab2f9909d0c83ba00edd38cdab77 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-11Makefile.am cleanupDamjan Marion1-7/+2
- remove unused stuff - add --quiet flag to libtool - avoid building some tests programs when tests are not enabled Change-Id: Ie34aeec1a598ad811256a00354f66cfddae9d0b9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-10API refactoring : l2, mpls, srPavel Kotucek1-4/+11
Change-Id: Ic5f273dae607a1d3902489e65734c76f027dc30f Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-01-10API refactoring : dpdkPavel Kotucek1-2/+6
Change-Id: If2541be803a0303401b013390e117c26fd1d9739 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-01-08Multiple Autotools improvementsDamjan Marion1-1/+6
- Defines some dependencies between shared libraries - updates version.h only when version changes Updating version.h on each "make" and "make install" was causing issues with parallel builds. "make install" was re-linking vpp binary due to "updated" version.h and in parallel it was re-linking shared libraries as part of installation process. That was resulting on sporadic build failures. Change-Id: I2a27ae1aea6a7a4100822018e095a60dd48d39ca Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-03vlib: merge libvlib_unix.so into libvlib.soDamjan Marion1-2/+1
Change-Id: Iedbee427d838794c4b26db5bd07b8d27aad9fcd8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+972
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>