aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/CMakeLists.txt
AgeCommit message (Collapse)AuthorFilesLines
2019-12-11devices: vhost API cleanupJakub Grajciar1-0/+3
Use consistent API types. Type: fix Change-Id: I2dec594cb834a45004edc9ca58ad7c7b4bd7ff06 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-12-04fib: Decouple source from priority and behaviourNeale Ranns1-6/+8
Type: feature the fib_source_t enum alone no longer defines the priority and behaviour, instead each source must be allocated these attributes. This allows the creation of other sources by the plugins (and soon over the API). Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
2019-12-04gre: Multi-point interfacesNeale Ranns1-0/+16
Type: feature Change-Id: I0129ad6ace44a50a8a3b26db8e445cd06b2b49e8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-03ipip: Tunnel flags controlling copying data to/from payload/encapNeale Ranns1-1/+6
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
2019-12-03ipsec: Changes to make ipsec encoder/decoders reusable by the pluginsPrashant Maheshwari1-0/+3
Type: fix Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com> Change-Id: I81b937fc8cfec36f8fb5de711ffbb02f23f3664e Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com>
2019-11-14virtio: refactor virtio-pci loggingDamjan Marion1-2/+3
Type: refactor Change-Id: I34306c1206b2bf5f521be6c6b78074ccf9259a08 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-11-12ip: IP address and prefix types (moved from LISP)Neale Ranns1-0/+2
Type: refactor Change-Id: I2c6b59013bfd21136a2955442c779685f951932b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08ipsec: remove dedicated IPSec tunnelsNeale Ranns1-4/+1
APIs for dedicated IPSec tunnels will remain in this release and are used to programme the IPIP tunnel protect. APIs will be removed in a future release. see: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-14gso: Add gso feature arcMohsin Kazmi1-0/+18
Type: refactor Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-10-14ping: Move to pluginMohsin Kazmi1-1/+0
Type: refactor Change-Id: I51d5bf54dfd408aa0c406cbdf0f4be10ef19d10d Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-10-07dhcp: Move to pluginNeale Ranns1-48/+0
Type: feature Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-09-26ip: add shallow virtual reassembly functionalityKlement Sekera1-0/+6
Type: feature Change-Id: Ibc8334e26c7e6f6120696c3e313b6e11d73dab99 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-09-25ip: refactor reassemblyKlement Sekera1-4/+4
this is a preparation step for introducing other reassembly types Type: refactor Change-Id: I197e299dbd729b00eead31667913b8ceff915d63 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-09-20misc: classifier-based packet trace filterDave Barach1-0/+2
See .../src/vnet/classify/trace_classify.h for the business end of the scheme. It would be best to hash pkts, prefetch buckets, and do the primary table lookups two at a time. The inline as given works, but perf tuning will be required. "At least it works..." Add "classify filter" debug cli, for example: classify filter mask l3 ip4 src dst \ match l3 ip4 dst 192.168.2.10 src 192.168.1.10 Add "pcap rx | tx trace ... filter" to use the current classify filter chain Patch includes sphinx documentation and doxygen tags. Next step: device-driver integration Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I05b1358a769f61e6d32470e0c87058f640486b26
2019-08-22dns: make the dns name resolver a pluginDave Barach1-18/+0
Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I823c2cd307a4613653a2d20f564dda062d4da31b
2019-08-21tcp: add option for always on event loggingFlorin Coras1-0/+1
Type: feature Add option to always compile in debugging infra. Debug verbosity can be controlled via configuration updatable via cli. Compile time inclusion and configuration of event logging verbosity is still available in order to minimize event logging impact. Change-Id: I9d946efe9fa4204fdace1adb1d6588c97b5ae758 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-13fib: add adj_midchain.h to the list of files to install in the include pathAlberto Compagno1-0/+1
Type: fix Ticket: VPP-1735 Signed-off-by: Alberto Compagno <acompagn+fdio@cisco.com> Change-Id: I7063516a60bb211ad91ef04041b2751ca3f6598e
2019-07-31qos: Store functionNeale Ranns1-0/+2
Type: feature store: write a QoS value into the buffer meta-data record: Extract a QoS value from a packet header and store it. mark: Make a change to the content of a packet header by writing a stored QoS value Change-Id: I07d1e87dd1ca90d40ac1ae1774fee1b272cab83f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-25build: add missing .api files for packagingBenoît Ganne1-1/+8
Type: fix Change-Id: Ic43fb0826907e3f3b42a78bfbd9a807cdbf1e8f9 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-07-24fib: Support the POP of a Psuedo Wire Control WordNeale Ranns1-0/+1
Type: feature Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-19fib: FIB Entry trackingNeale Ranns1-0/+1
Instead of all clients directly RR sourcing the entry they are tracking, use a deidcated 'tracker' object. This tracker object is a entry delegate and a child of the entry. The clients are then children of the tracker. The benefit of this aproach is that each time a new client tracks the entry it doesn't RR source it. When an entry is sourced all its children are updated. Thus, new clients tracking an entry is O(n^2). With the tracker as indirection, the entry is sourced only once. Type: feature Change-Id: I5b80bdda6c02057152e5f721e580e786cd840a3b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-05sctp: move to plugins, disabled by defaultFlorin Coras1-27/+0
Removed sctp buffer metadata from vnet/buffer.h, added it to the plugin. Add registration APIs for plugin-based vlib_buffer_opaque / opaque2 decoders, used by "pcap dispatch trace ..." for display in the wireshark dissector. Type:refactor Not actively maintained. Change-Id: Ie4cb6ba66f68b3b3a7d7d2c63c917fdccf994371 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-25tcp: delivery rate estimatorFlorin Coras1-0/+1
Type: feature First cut implementation with limited testing. The feature is not enabled by default and the expectation is that cc algorithms will enable it on demand. Change-Id: I92b70cb4dabcff0e9ccd1d725952c4880af394da Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-06-25hsa: move external echo apps to hsaFlorin Coras1-26/+0
Type: refactor Change-Id: I9a5c2abfd0c5444b31d9020cea918f9cd28f1ac2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-06-25hsa: move session-apps to host-stack apps pluginFlorin Coras1-16/+0
Type:refactor Change-Id: I114fea3a54258797e961d8627a99ba2098674d20 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-22/+3
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-0/+1
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-07ipsec: export ipsec_punt.hNeale Ranns1-0/+1
Change-Id: Ib489922af246b7dc3e770a57e51b87a2568a014d Type: fix Fixes: b71fa75d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-06IP-Punt-redirect: allow the use of a FIB path to describe how toNeale Ranns1-0/+1
redirect Change-Id: I2a3ba2a3d73ea8511e3a511855b041432328f0a8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-28Punt: socket register for exception dispatched/punted packets based on reasonNeale Ranns1-1/+2
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions - move the punt nodes into punt_node.c - improve tests (test that the correct packets are punted to the registered socket) Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-18api: export ip_types.api for out-of-tree pluginsBenoît Ganne1-1/+5
Out-of-tree plugins can refer to IP types in their API. The .api and associated headers must be exported. Change-Id: I75004343b040defd9eebac6a8a95c2ecf3c8079a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-04-05IPSEC: punt reasons; SPI=0, no-tunnelNeale Ranns1-0/+1
Change-Id: If76992e283a27fa193a6865257ab3aa764066e48 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29Integrate first QUIC protocol implementationNathan Skrzypczak1-0/+6
Currently supports on single stream exposed through standard internal APIs Based on libquicly & picotls by h2o Change-Id: I7bc1ec0e399d1fb02bfd1da91aa7410076d08d14 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-03-26ADJ: midchain delegate to performing stackingNeale Ranns1-0/+1
this can be used by e.g. tunnels so it doesn't need to be implemented for each tunnel type. Change-Id: I0790f89aa49f83421612b35108cce67693285999 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-21BVI InterfaceNeale Ranns1-0/+2
a new dedicated BVI interface as opposed to [re]using a loopback. benefits: - removes ambiguity over the purpose of a loopback interface - TX node dedicated to BVI only functions. Change-Id: I749d6b38440d450ac5b909a28053c75ec9df946a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-19crypto: introduce crypto infraDamjan Marion1-0/+14
Change-Id: Ibf320b3e7b054b686f3af9a55afd5d5bda9b1048 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-13deprecate VLIB_DEVICE_TX_FUNCTION_MULTIARCHFilip Tehlar1-0/+7
Change-Id: I8819bcb9e228e7a432f4a7b67b6107f984927cd4 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-13deprecate VLIB_NODE_FUNCTION_MULTIARCHFilip Tehlar1-1/+22
Change-Id: I403173846bc5b1bbbe2a2c41225b0f666f851cb9 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-12ip: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+12
Change-Id: Id55ec87724e421d5b722314f9302c6ade7545306 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-12l2: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+11
Change-Id: I8370c06150ce4499475e9d6dc6b3ab8be2016202 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-11dpo: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+8
Change-Id: I3043112c3e7584f61e64dc6d20d57604ebceb76a Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-11mfib: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+4
Change-Id: I7114cd55ce1fc320d17b36cab731546fe4c58a72 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-07classify: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+5
Change-Id: I01730ec9eb8033074c8710daf0848c3573293aeb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-07policer: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+4
Change-Id: I88d2632fa451dbafbc212dd142a67fe5ec4cd610 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06udp: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+5
Change-Id: I2b324c77df2685a0bdfb617fb484022daf017d0b Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06tcp: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+6
Change-Id: Ifd9fa30eed343e2c5d40582b3e3aa589b070637d Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06interface: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+5
Change-Id: Ib92e338d0becbfbc38e6b9f34f262df76b63eead Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06cop: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+6
Change-Id: Ic0c9c50376ceb0ff4e2d5e52e13b6506e68adf4b Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06vxlan*: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+13
Change-Id: Ide23bb3d82024118214902850821a8184fe65dfc Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06span: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-0/+4
Change-Id: I5c671d8af8d528eae625001d4755db8ef61f00b2 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>