summaryrefslogtreecommitdiffstats
path: root/src/vnet/CMakeLists.txt
AgeCommit message (Collapse)AuthorFilesLines
2022-01-05interface: refactor interface capabilities codeDamjan Marion1-0/+1
Make it shorter to type, easier to debug, make adding callbacks in future simpler. Type: improvement Change-Id: I6cdd6375e36da23bd452a7c7273ff42789e94433 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-12-14virtio: integrate with new tx infraMohsin Kazmi1-1/+1
Type: improvement Change-Id: I337ec63d0868f665329d68eadf1744e080b73a0d Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-12-14interface: Add interface monitor cliNathan Skrzypczak1-0/+1
This adds an interface CLI 'monitor interface <interface>' that periodically reports rx/tx pps & bandwidth for a given interface. Type: feature Change-Id: Ia9d59b3443913520a52b38d7bda012190be6f167 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-11-23misc: deprecate gbp and its dependentsNeale Ranns1-24/+0
Type: improvement Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Benoît Ganne <bganne@cisco.com> Change-Id: I2f30a4f04fd9a8635ce2d259b5fd5b0c85cee8c3
2021-11-02interface: avoid dependency on crc32 for eth handoffFlorin Coras1-1/+1
Make sure the infra works on platforms without crc32, like risc-v Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I5f267497bb4e73a91a5320822ca42388f1f8b037
2021-10-31interface: handoff refactor and optimizationsFlorin Coras1-1/+1
- move existing ethernet hash functions to hash infra (no l4 awareness) - refactor code to use hash infra and add apis to request l4 aware hashing functions - hashing functions per interface - code cleanup Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ia9f44db98d83f0f027aeb37718585a2e10ffd2c6
2021-10-30build: add missing fib headers in packagesBenoît Ganne1-0/+3
Type: fix Fixes: d6953332db225d5355f50348ef3b09f0525d5282 Change-Id: Ib85fee40e71ebe5bc2b84c62e37298b5e390d520 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-10-22ipsec: add api test fileFilip Tehlar1-0/+1
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ib3fe4f306f23541a01246b74ad0f1a7074fa03bb
2021-10-21l2: add api test fileFilip Tehlar1-0/+1
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ie79a2deac03c04c0697e482a649ff151142126ed
2021-10-21session: add api test fileFilip Tehlar1-0/+1
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I6b89c4158d10d4928c8418312180dbeba7d70ab2
2021-10-18interface: add api test fileFilip Tehlar1-0/+1
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ib07029204ecf12bf2adb5a39afa54bc98fb81f34
2021-10-01devices: add support for pseudo header checksumMohsin Kazmi1-0/+1
Type: improvement Linux uses pseudo header checksum when checksum of l4 is offloaded. This patch adds similar support in virtual interfaces. Change-Id: I6a94d1104e59356f95057e7c122e3be9cd8659a3 Signed-off-by: Aloys Augustin <aloaugus@cisco.com> Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-09-28sr: add API test filesFilip Tehlar1-0/+1
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Iefc88107ae96915570ae425a527c3969f7ce7b1d
2021-09-27misc: move part of vpe apis to vlibmemoryFlorin Coras1-0/+6
VPE apis are actually vlib apis. This moves those that are not tightly coupled with vapi to vlib_api Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I456a64ce49a0cdeff4a0931c6ea513cb639f683e Signed-off-by: Ole Troan <ot@cisco.com>
2021-09-20hash: add support for hashing infraMohsin Kazmi1-0/+13
Type: feature Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I3652ae275385d9b1eb1b11f418e3a7e5fef2f556
2021-09-16ip6-nd: add ip6-nd proxyMohsin Kazmi1-0/+1
Type: feature Change-Id: I91f72f5802db195d1a15424d67c1b6e518168f9f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-08-17build: install ethernet/ethernet_types_api.hMohammed Hawari1-0/+1
ip/ip_types_api.h is already installed by the build system Change-Id: Iec43e0ad50e32473d93ea8f7281b5a6477ddc87f Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: improvement
2021-08-13ip: source address selectionOle Troan1-0/+2
Implement a simple source address selection algorithm for IPv4 and IPv6. IPv6 does not yet implement RFC6724 but supports link-locals. ping now chooses correct source address for link-local destination. Added ping support for link-local multicast (e.g. allnodes). Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1a3382c1f7d4ace0386c2c19e4e47b045b73a3ed Signed-off-by: Ole Troan <ot@cisco.com>
2021-08-11fib: Compiile time option to use 8-8-8-8 stride tries for FIB ratherNeale Ranns1-0/+2
than 16-8-8-8 Type: feature the memory trade-off is: for 8-8-8-8 tries DBGvpp# sh ip fib mtrie mem ipv4-VRF:0 mtrie:8068 hash:3499 totals: mtrie:8068 hash:3499 all:11567 for 16-8-8 DBGvpp# sh ip fib mtrie mem ipv4-VRF:0 mtrie:333056 hash:3499 totals: mtrie:333056 hash:3499 all:336555 Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I5271a4322d786de6e47613cff9bd432762dbed2a
2021-08-11fib: A 16-8-8 and a 8-8-8-8 versions of an ip4_fib_tNeale Ranns1-0/+3
Type: feature The difference being the MTRIE type they contain. THE FIB continues to use the 16-8-8 version. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I5a54d4e6e6cc639f18a3fb65ef2925507a7ef1de
2021-07-13misc: remove vnet_all_api_h and vnet_msg_enumFilip Tehlar1-2/+0
These file are no longer needed Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
2021-05-29udp: add udp decapsulationArthur de Kerhor1-0/+1
Possibility to register a port via CLI or API to decap incoming UDP packets: - For CLI, a user needs to specify the inner protocol (only MPLS supported for now) - For API, the protocol is specified by index Added unittests Type: feature Change-Id: Ifedd86d8db2e355b7618472554fd67d77a13a4aa Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
2021-05-21bfd: use vnet cryptoKlement Sekera1-4/+1
Type: improvement Change-Id: I873a99c1258a97ed5ed195b9756e8302f865e7f0 Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2021-05-11interface: tx queue infraDamjan Marion1-0/+2
Type: improvement Change-Id: I415b2f980de10ca3154d2c8677c24792453eccd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-01vlib: refactor trajectory trace debug featureBenoît Ganne1-1/+0
trajectory trace has been broken for a while because we used to save the buffer trajectory in a vector pointed to in opaque2. This does not work well when opaque2 is copied (eg. because of a clone) as 2 buffers end up sharing the same vector. This dedicates a full cacheline in the buffer metadata instead when trajectory is compiled in. No dynamic allocation, no sharing, no tears. Type: refactor Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-04-01fib: Move the adjacency midchain nodes into a separate fileNeale Ranns1-1/+2
Type: refactor It's only the nodes that require compiling for each arch, Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ibb2bfc756001735cc10ef0fd8db7e8b8358cf8e2
2021-03-16fib: Allow the creation of new source on the APINeale Ranns1-1/+4
Type: feature an client can dump the existing sources, examine their priorities, then define thier own source. Usefull if a client wants to distingusih between say, static, ospf, bgp, etc routes it has added over the API. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
2021-03-11misc: remove cop API support (part 1)Dave Barach1-10/+0
API marked for deprecation last year due to non-inclusive language. Last supported release: 21.01. See the "adl" plugin. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I931e58ced9cc8403ca5b23fd6b07e50d0ff7306b
2021-02-15ip: Path MTUNeale Ranns1-0/+3
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-01-21interface: rx queue infra rework, part oneDamjan Marion1-0/+3
Type: improvement Change-Id: I4008cadfd5141f921afbdc09a3ebcd1dcf88eb29 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-08fib: Source Address SelectionNeale Ranns1-0/+2
Type: feature Use the FIB to provide SAS (in so far as it is today) - Use the glean adjacency as the record of the connected prefixes = there's a glean per-{interface, protocol, connected-prefix} - Keep the glean up to date with whatever the recieve host prefix is (since it can change) Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
2020-11-25api: vat2 and json autogeneration for api messagesOle Troan1-1/+7
VAT2: A completely auto-generated replacement of VAT. Reads input message in JSON from stdin and outputs received messages in JSON. A VAT2 plugin is automatically built for a .api file. There no longer a need for a separate _test.c. Example: vat2 show_version {} { "_msgname": "show_version_reply", "retval": 0, "program": "vpe", "version": "21.01-rc0~411-gf6eb348a6", "build_date": "2020-11-19T09:49:25", "build_directory": "/vpp/autogen3" } vat2 sw_interface_dump '{"sw_if_index": -1, "name_filter_valid": 0, "name_filter": ""}' [{ "_msgname": "sw_interface_details", "sw_if_index": 0, "sup_sw_if_index": 0, "l2_address": "00:00:00:00:00:00", "flags": "Invalid ENUM", "type": "IF_API_TYPE_HARDWARE", "link_duplex": "LINK_DUPLEX_API_UNKNOWN", "link_speed": 0, "link_mtu": 0, "mtu": [0, 0, 0, 0], "sub_id": 0, "sub_number_of_tags": 0, "sub_outer_vlan_id": 0, "sub_inner_vlan_id": 0, "sub_if_flags": "Invalid ENUM", "vtr_op": 0, "vtr_push_dot1q": 0, "vtr_tag1": 0, "vtr_tag2": 0, "outer_tag": 0, "b_dmac": "00:00:00:00:00:00", "b_smac": "00:00:00:00:00:00", "b_vlanid": 0, "i_sid": 0, "interface_name": "local0", "interface_dev_type": "local", "tag": "" }] This is the first phase and vat2 is not integrated in packaging yet. Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876 Signed-off-by: Ole Troan <ot@cisco.com>
2020-10-28misc: Break the big IP header files to improve compile timeNeale Ranns1-0/+5
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
2020-10-21virtio: run process to send interrupts to input nodesMohsin Kazmi1-0/+1
Type: improvement virtio interfaces support packet coalescing and buffering which depends on timer expiry to flush the stored packets periodically. virtio input node checks timer expiry and schedules tx queue accordingly. In poll mode, timer expiry is handled naturally, as input node runs periodically. In interrupt mode, virtio input node depends on the interrupts send from backend. Stored packets could starve, if there would not be interrupts to input node. This patch implements a process node which periodically sends interrupt to virtio input node given coalescing or buffering feature is enabled on an interface. Change-Id: Ic38f749f74b001073d4d0579dca149d0a4cea039 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-10-21misc: minimize dependencies on udp.hFlorin Coras1-0/+2
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
2020-10-08tcp: custom geometry for timer wheelFlorin Coras1-0/+1
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I04f992e5d91d21f1e5bbafef070478cfe268d94a
2020-10-08l2: input performanceNeale Ranns1-1/+2
Type: improvement - cache the values form the BD on the input config to avoid loading - avoid the short write long read on the sequence number - use vlib_buffer_enqueue_to_next Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
2020-09-28virtio: add packet buffering on txMohsin Kazmi1-0/+1
Type: feature This patch adds packet buffering on tx for slow backend which have some jitter/delays in freeing the vrings. There are some limitations to the current design: 1) It only works in poll mode. 2) Atleast 1 rx queue of an interface (with buffering enabled) should be placed on each worker and main thread. Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ib93c350298b228e80426e58ac77f3bbc93b8be27
2020-09-22lisp: Move to pluginNeale Ranns1-58/+0
Type: refactor Change-Id: I54df533a8f863c4e49742903cf2457f18b4fc506 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-21geneve: Move to pluginNeale Ranns1-23/+0
Type: refactor Change-Id: I613bf4d6517591351b212bfe6c8d93abf235f5dc Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-21misc: Move l2tp to pluginNeale Ranns1-23/+0
Type: refactor Change-Id: Ifb36eeb146b87e9e305881429d32d6879e955e1e Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-21lldp: Move to pluginNeale Ranns1-18/+0
Type: refactor Change-Id: Ifd770ff4850e63474bf4682ad463021b03786b4b Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-04virtio: remove kernel virtio header dependenciesMohsin Kazmi1-1/+5
Type: refactor tap, virtio and vhost use virtio/vhost header files from linux kernel. Different features are supported on different kernel versions, making it difficult to use those in VPP. This patch removes virtio/vhost based header dependencies to local header files. Change-Id: I064a8adb5cd9753c986b6f224bb075200b3856af Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-09-03crypto: Add async crypto APIsNathan Skrzypczak1-0/+3
Type: feature This adds api calls for the following CLIs: * set sw_scheuduler worker <N> crypto on|off * set crypto async dispatch polling|interrupt * set crypto handler * set crypto async handler Change-Id: Ic701d149c440e42ea4575da42b9f69e4c8759602 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2020-08-25flow: add vnet/flow formal APIChenmin Sun1-0/+3
This patch adds the API for vnet/flow infra. Currently this API supports the below flow types: VNET_FLOW_TYPE_IP4_N_TUPLE VNET_FLOW_TYPE_IP6_N_TUPLE VNET_FLOW_TYPE_IP4_N_TUPLE_TAGGED VNET_FLOW_TYPE_IP6_N_TUPLE_TAGGED VNET_FLOW_TYPE_IP4_L2TPV3OIP VNET_FLOW_TYPE_IP4_IPSEC_ESP VNET_FLOW_TYPE_IP4_IPSEC_AH VNET_FLOW_TYPE_IP4_GTPU All the above flows are tested with Intel E810/X710 NIC Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Icb8ae20cab9bdad6b120dddc3bd4fb1d85634f3f
2020-08-20virtio: add modern device supportMohsin Kazmi1-0/+2
Type: feature Change-Id: I205f7c146a213d603d9d1e46fcf5195a876608dc Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-08-20virtio: refactor pci device codeMohsin Kazmi1-0/+2
Type: refactor Change-Id: I7342178f9ab9adb99b91a4f984bc22bef2ce8021 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-08-14gso: packet coalesce libraryMohsin Kazmi1-0/+2
Type: feature Change-Id: Ia19d3611e596d9ec47509889b34e8fe793a0ccc3 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-08-14ip: add VNET_IP_TABLE_ADD_DEL_FUNCTIONSteven Luong1-0/+1
vrf table may be dynamically added or deleted. When the table is deleted, clients who use the corresponding vrf table may need a callback to do the clean up. The mechanism added here is cloned from VNET_SW_INTERFACE_ADD_DEL_FUNCTION. Type: improvement Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I08635c715cd7361a6c359b90890dd3545b0da94c
2020-07-21ipsec: Dedicated IPSec interface typeNeale Ranns1-0/+1
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie8bd50df163aea2798e9f9d35a13dcadc4a4a4b2