Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
- inline some common encap fixup functions into the midchain
rewrite node so we don't incur the cost of the virtual function call
- change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header
- add adj-midchain-tx to multiarch sources
- don't run adj-midchain-tx as a feature, instead put this node as the
adj's next and at the end of the feature arc.
- cache the feature arc config index (to save the cache miss going to fetch it)
- don't check if features are enabled when taking the arc (since we know they are)
the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc)
for IPSec:
- don't run esp_encrypt as a feature, instead when required insert this
node into the adj's next and into the end of the feature arc. this
implies that encrypt is always 'the last feature' run, which is
symmetric with decrypt always being the first.
- esp_encrpyt for tunnels has adj-midchain-tx as next node
Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com>
Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com>
Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ib7f73a0b6de188982a09040f7739dc46be3cb1de
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: feature
- replace functions for prefixes attached to interfaces
- add ip_interface.[ch] to consoldate the functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9c0c39c09dbf80ea1aadefee02c9bd16f094b6ad
|
|
Type: feature
Change-Id: I85f6ec77187a4983c66c5e22fd39fbb2cef82902
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Merge two mildly incompatible static inlines, and rename the results
vnet_calc_checksums_inline (...).
The resulting inline has three additional parameters: int is_ip4, int
is_ip6, and int with_gso. All calls manage to pass one or more as
compile-time constants, which causes a certain amount of code to
disappear in each instantiation.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I1a2a0e353b9a7bca20bc81318e8c915617261e1a
|
|
Type: feature
- move the IP4 code to plugin
- add ip6 support
- add suport for uRPF on TX
- add tests
Change-Id: I074c2debc486d3e79c12fad4b8dbd72c41e841a0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie6c03195019fe18c547b22f4387d7f2b14b71461
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2057ebb4b6a4af3ef8fd9b73aadfa00d63bae618
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia477b8dba9266f47907967e363c11048e5cd95ab
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1a60809a8bbbbb8ac8b65ab990d51aae1229647f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I3c348ad2fca8bb3d9a246af7a2aa9dc9c33f57c3
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia14f33992353b419b70b55beed63ab8ed6a2e837
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Building applications using the VPP bin_api outside of the VPP tree is broken, missing these includes.
Type: fix
Change-Id:
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: Ibcb2fea0f5740a73b9577392aa54ac3c93c8d2b5
|
|
Bypass node MUST NOT intercept a packet if destination IP doesn’t match
a local address. However IP address interpretation depends on the VRF,
hence bypass node must take that into account.
This patch also factors-out common VTEP management and checking code.
Type: improvement
Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com>
Change-Id: I5665d94882bbf45d15f8da140c7ada528ec7fa94
|
|
Type: refactor
The Tunnel Endpoint Informatiob Base (TEIB) is a better
description of what it is (a mapping between tunnel endpoint
address, in the overlay, and next-hop address, in the underlay)
whereas NHRP is one instanc eof a control protocol that might add
such endpoints.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Idcb2ad0b6543d3e5d9f6e96f9d14dafb5ce2aa85
|
|
Both are out of sync for long time...
Type: refactor
Change-Id: I7de3170d35330fc172501d87655dfef91998b8fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
common funcitons across IP-in-IP and GRE tunnels for encap/decap
functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I325b66824878d843af167adfe5a7a96b0ab90566
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I18dcdb7af3e327f6cacdbcb1e52b89f13d6ba6e2
|
|
Currently if user want to set ip4 address to the api, it must convert to ip6
format, e.g. user want to ip4 "90.1.2.1" but must convert to "::5A01:0201",
it is not acceptable, this fix solved the issue.
Ticket: FDIO-753
Type: fix
Change-Id: I2ffa5a3d38400ee176cf601421074f71fc395f03
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
|
|
Two modules in vnet include vpp/app/version.h but there is
no explicit build dependency for this generated file. This
leaves a race condition in the build system that the Coverity
build has recently started triggering.
Change-Id: I8e2bb32feeb16e1bdd8efb0d2633cfdba60f51aa
Type: fix
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I38a409af770c88c1eb2c68b24abef2a5a91e1b9a
|
|
the sequence number increment and the anti-replay window
checks must be atomic. Given the vector nature of VPP we
can't simply use atomic increments for sequence numbers,
since a vector on thread 1 with lower sequence numbers could
be 'overtaken' by packets on thread 2 with higher sequence
numbers.
The anti-replay logic requires a critical section, not just
atomics, and we don't want that.
So when the SA see the first packet it is bound to that worker
all subsequent packets, that arrive on a different worker,
are subject to a handoff.
Type: feature
Change-Id: Ia20a8645fb50622ea6235ab015a537f033d531a4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Use consistent API types.
Type: fix
Change-Id: I2dec594cb834a45004edc9ca58ad7c7b4bd7ff06
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: feature
the fib_source_t enum alone no longer defines the priority and
behaviour, instead each source must be allocated these attributes.
This allows the creation of other sources by the plugins (and
soon over the API).
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
|
|
Type: feature
Change-Id: I0129ad6ace44a50a8a3b26db8e445cd06b2b49e8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
|
|
Type: fix
Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com>
Change-Id: I81b937fc8cfec36f8fb5de711ffbb02f23f3664e
Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com>
|
|
Type: refactor
Change-Id: I34306c1206b2bf5f521be6c6b78074ccf9259a08
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I2c6b59013bfd21136a2955442c779685f951932b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
APIs for dedicated IPSec tunnels will remain in this release and are
used to programme the IPIP tunnel protect. APIs will be removed in a
future release.
see:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I51d5bf54dfd408aa0c406cbdf0f4be10ef19d10d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: Ibc8334e26c7e6f6120696c3e313b6e11d73dab99
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
this is a preparation step for introducing other reassembly types
Type: refactor
Change-Id: I197e299dbd729b00eead31667913b8ceff915d63
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
See .../src/vnet/classify/trace_classify.h for the business end
of the scheme.
It would be best to hash pkts, prefetch buckets, and do the primary
table lookups two at a time. The inline as given works, but perf
tuning will be required. "At least it works..."
Add "classify filter" debug cli, for example:
classify filter mask l3 ip4 src dst \
match l3 ip4 dst 192.168.2.10 src 192.168.1.10
Add "pcap rx | tx trace ... filter" to use the current classify filter chain
Patch includes sphinx documentation and doxygen tags.
Next step: device-driver integration
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I05b1358a769f61e6d32470e0c87058f640486b26
|
|
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I823c2cd307a4613653a2d20f564dda062d4da31b
|
|
Type: feature
Add option to always compile in debugging infra. Debug verbosity can be
controlled via configuration updatable via cli. Compile time inclusion
and configuration of event logging verbosity is still available in order
to minimize event logging impact.
Change-Id: I9d946efe9fa4204fdace1adb1d6588c97b5ae758
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Ticket: VPP-1735
Signed-off-by: Alberto Compagno <acompagn+fdio@cisco.com>
Change-Id: I7063516a60bb211ad91ef04041b2751ca3f6598e
|
|
Type: feature
store: write a QoS value into the buffer meta-data
record: Extract a QoS value from a packet header and store it.
mark: Make a change to the content of a packet header by writing a stored
QoS value
Change-Id: I07d1e87dd1ca90d40ac1ae1774fee1b272cab83f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: Ic43fb0826907e3f3b42a78bfbd9a807cdbf1e8f9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Instead of all clients directly RR sourcing the entry they are tracking,
use a deidcated 'tracker' object. This tracker object is a entry
delegate and a child of the entry. The clients are then children of the
tracker.
The benefit of this aproach is that each time a new client tracks the
entry it doesn't RR source it. When an entry is sourced all its children
are updated. Thus, new clients tracking an entry is O(n^2). With the
tracker as indirection, the entry is sourced only once.
Type: feature
Change-Id: I5b80bdda6c02057152e5f721e580e786cd840a3b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Removed sctp buffer metadata from vnet/buffer.h, added it to the
plugin. Add registration APIs for plugin-based vlib_buffer_opaque /
opaque2 decoders, used by "pcap dispatch trace ..." for display in the
wireshark dissector.
Type:refactor
Not actively maintained.
Change-Id: Ie4cb6ba66f68b3b3a7d7d2c63c917fdccf994371
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: feature
First cut implementation with limited testing. The feature is not
enabled by default and the expectation is that cc algorithms will enable
it on demand.
Change-Id: I92b70cb4dabcff0e9ccd1d725952c4880af394da
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Change-Id: I9a5c2abfd0c5444b31d9020cea918f9cd28f1ac2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:refactor
Change-Id: I114fea3a54258797e961d8627a99ba2098674d20
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|