Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ib3fe4f306f23541a01246b74ad0f1a7074fa03bb
|
|
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ie79a2deac03c04c0697e482a649ff151142126ed
|
|
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I6b89c4158d10d4928c8418312180dbeba7d70ab2
|
|
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ib07029204ecf12bf2adb5a39afa54bc98fb81f34
|
|
Type: improvement
Linux uses pseudo header checksum when checksum of l4 is offloaded.
This patch adds similar support in virtual interfaces.
Change-Id: I6a94d1104e59356f95057e7c122e3be9cd8659a3
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Iefc88107ae96915570ae425a527c3969f7ce7b1d
|
|
VPE apis are actually vlib apis. This moves those that are not tightly
coupled with vapi to vlib_api
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I456a64ce49a0cdeff4a0931c6ea513cb639f683e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: feature
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3652ae275385d9b1eb1b11f418e3a7e5fef2f556
|
|
Type: feature
Change-Id: I91f72f5802db195d1a15424d67c1b6e518168f9f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
ip/ip_types_api.h is already installed by the build system
Change-Id: Iec43e0ad50e32473d93ea8f7281b5a6477ddc87f
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Implement a simple source address selection algorithm
for IPv4 and IPv6.
IPv6 does not yet implement RFC6724 but supports link-locals.
ping now chooses correct source address for link-local destination.
Added ping support for link-local multicast (e.g. allnodes).
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1a3382c1f7d4ace0386c2c19e4e47b045b73a3ed
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
than 16-8-8-8
Type: feature
the memory trade-off is:
for 8-8-8-8 tries
DBGvpp# sh ip fib mtrie mem
ipv4-VRF:0 mtrie:8068 hash:3499
totals: mtrie:8068 hash:3499 all:11567
for 16-8-8
DBGvpp# sh ip fib mtrie mem
ipv4-VRF:0 mtrie:333056 hash:3499
totals: mtrie:333056 hash:3499 all:336555
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5271a4322d786de6e47613cff9bd432762dbed2a
|
|
Type: feature
The difference being the MTRIE type they contain.
THE FIB continues to use the 16-8-8 version.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5a54d4e6e6cc639f18a3fb65ef2925507a7ef1de
|
|
These file are no longer needed
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
|
|
Possibility to register a port via CLI or API to decap incoming UDP
packets:
- For CLI, a user needs to specify the inner protocol (only MPLS
supported for now)
- For API, the protocol is specified by index
Added unittests
Type: feature
Change-Id: Ifedd86d8db2e355b7618472554fd67d77a13a4aa
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
Type: improvement
Change-Id: I873a99c1258a97ed5ed195b9756e8302f865e7f0
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: I415b2f980de10ca3154d2c8677c24792453eccd0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
trajectory trace has been broken for a while because we used to save the
buffer trajectory in a vector pointed to in opaque2. This does not work
well when opaque2 is copied (eg. because of a clone) as 2 buffers end up
sharing the same vector.
This dedicates a full cacheline in the buffer metadata instead when
trajectory is compiled in. No dynamic allocation, no sharing, no tears.
Type: refactor
Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
It's only the nodes that require compiling for each arch,
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ibb2bfc756001735cc10ef0fd8db7e8b8358cf8e2
|
|
Type: feature
an client can dump the existing sources, examine their
priorities, then define thier own source.
Usefull if a client wants to distingusih between say, static,
ospf, bgp, etc routes it has added over the API.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
|
|
API marked for deprecation last year due to non-inclusive language.
Last supported release: 21.01. See the "adl" plugin.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I931e58ced9cc8403ca5b23fd6b07e50d0ff7306b
|
|
Type: feature
Support setting the MTU for a peer on an interface. The minimum value of
the path and interface MTU is used at forwarding time.
the path MTU is specified for a given peer, by address and table-ID.
In the forwarding plane the MTU is enfored either:
1 - if the peer is attached, then the MTU is set on the peer's
adjacency
2 - if the peer is not attached, it is remote, then a DPO is added to
the peer's FIB entry to perform the necessary fragmentation.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
|
|
Type: improvement
Change-Id: I4008cadfd5141f921afbdc09a3ebcd1dcf88eb29
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Use the FIB to provide SAS (in so far as it is today)
- Use the glean adjacency as the record of the connected prefixes
= there's a glean per-{interface, protocol, connected-prefix}
- Keep the glean up to date with whatever the recieve host prefix is
(since it can change)
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
|
|
VAT2: A completely auto-generated replacement of VAT.
Reads input message in JSON from stdin and outputs received messages in JSON.
A VAT2 plugin is automatically built for a .api file.
There no longer a need for a separate _test.c.
Example:
vat2 show_version {}
{
"_msgname": "show_version_reply",
"retval": 0,
"program": "vpe",
"version": "21.01-rc0~411-gf6eb348a6",
"build_date": "2020-11-19T09:49:25",
"build_directory": "/vpp/autogen3"
}
vat2 sw_interface_dump '{"sw_if_index": -1,
"name_filter_valid": 0,
"name_filter": ""}'
[{
"_msgname": "sw_interface_details",
"sw_if_index": 0,
"sup_sw_if_index": 0,
"l2_address": "00:00:00:00:00:00",
"flags": "Invalid ENUM",
"type": "IF_API_TYPE_HARDWARE",
"link_duplex": "LINK_DUPLEX_API_UNKNOWN",
"link_speed": 0,
"link_mtu": 0,
"mtu": [0, 0, 0, 0],
"sub_id": 0,
"sub_number_of_tags": 0,
"sub_outer_vlan_id": 0,
"sub_inner_vlan_id": 0,
"sub_if_flags": "Invalid ENUM",
"vtr_op": 0,
"vtr_push_dot1q": 0,
"vtr_tag1": 0,
"vtr_tag2": 0,
"outer_tag": 0,
"b_dmac": "00:00:00:00:00:00",
"b_smac": "00:00:00:00:00:00",
"b_vlanid": 0,
"i_sid": 0,
"interface_name": "local0",
"interface_dev_type": "local",
"tag": ""
}]
This is the first phase and vat2 is not integrated in packaging yet.
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
Type: improvement
virtio interfaces support packet coalescing and buffering which
depends on timer expiry to flush the stored packets periodically.
virtio input node checks timer expiry and schedules tx queue
accordingly. In poll mode, timer expiry is handled naturally,
as input node runs periodically. In interrupt mode, virtio
input node depends on the interrupts send from backend.
Stored packets could starve, if there would not be interrupts
to input node.
This patch implements a process node which periodically
sends interrupt to virtio input node given coalescing or buffering
feature is enabled on an interface.
Change-Id: Ic38f749f74b001073d4d0579dca149d0a4cea039
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I04f992e5d91d21f1e5bbafef070478cfe268d94a
|
|
Type: improvement
- cache the values form the BD on the input config to avoid loading
- avoid the short write long read on the sequence number
- use vlib_buffer_enqueue_to_next
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
|
|
Type: feature
This patch adds packet buffering on tx for
slow backend which have some jitter/delays
in freeing the vrings.
There are some limitations to the current design:
1) It only works in poll mode.
2) Atleast 1 rx queue of an interface (with buffering
enabled) should be placed on each worker and main thread.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ib93c350298b228e80426e58ac77f3bbc93b8be27
|
|
Type: refactor
Change-Id: I54df533a8f863c4e49742903cf2457f18b4fc506
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I613bf4d6517591351b212bfe6c8d93abf235f5dc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: Ifb36eeb146b87e9e305881429d32d6879e955e1e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: Ifd770ff4850e63474bf4682ad463021b03786b4b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
tap, virtio and vhost use virtio/vhost header files from linux
kernel. Different features are supported on different kernel
versions, making it difficult to use those in VPP. This patch
removes virtio/vhost based header dependencies to local header
files.
Change-Id: I064a8adb5cd9753c986b6f224bb075200b3856af
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
This adds api calls for the following CLIs:
* set sw_scheuduler worker <N> crypto on|off
* set crypto async dispatch polling|interrupt
* set crypto handler
* set crypto async handler
Change-Id: Ic701d149c440e42ea4575da42b9f69e4c8759602
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This patch adds the API for vnet/flow infra.
Currently this API supports the below flow types:
VNET_FLOW_TYPE_IP4_N_TUPLE
VNET_FLOW_TYPE_IP6_N_TUPLE
VNET_FLOW_TYPE_IP4_N_TUPLE_TAGGED
VNET_FLOW_TYPE_IP6_N_TUPLE_TAGGED
VNET_FLOW_TYPE_IP4_L2TPV3OIP
VNET_FLOW_TYPE_IP4_IPSEC_ESP
VNET_FLOW_TYPE_IP4_IPSEC_AH
VNET_FLOW_TYPE_IP4_GTPU
All the above flows are tested with Intel E810/X710 NIC
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Icb8ae20cab9bdad6b120dddc3bd4fb1d85634f3f
|
|
Type: feature
Change-Id: I205f7c146a213d603d9d1e46fcf5195a876608dc
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I7342178f9ab9adb99b91a4f984bc22bef2ce8021
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: Ia19d3611e596d9ec47509889b34e8fe793a0ccc3
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
vrf table may be dynamically added or deleted. When the table is deleted,
clients who use the corresponding vrf table may need a callback to
do the clean up. The mechanism added here is cloned from
VNET_SW_INTERFACE_ADD_DEL_FUNCTION.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I08635c715cd7361a6c359b90890dd3545b0da94c
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie8bd50df163aea2798e9f9d35a13dcadc4a4a4b2
|
|
Provide binary API compatibility support for the "cop" APIs until vpp
21.01.
Change the deprecation date in map.api to vpp 21.01.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I0e60d96de4ae9ae4448f134cf257934126f3b760
|
|
Type: improvement
- inline some common encap fixup functions into the midchain
rewrite node so we don't incur the cost of the virtual function call
- change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header
- add adj-midchain-tx to multiarch sources
- don't run adj-midchain-tx as a feature, instead put this node as the
adj's next and at the end of the feature arc.
- cache the feature arc config index (to save the cache miss going to fetch it)
- don't check if features are enabled when taking the arc (since we know they are)
the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc)
for IPSec:
- don't run esp_encrypt as a feature, instead when required insert this
node into the adj's next and into the end of the feature arc. this
implies that encrypt is always 'the last feature' run, which is
symmetric with decrypt always being the first.
- esp_encrpyt for tunnels has adj-midchain-tx as next node
Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com>
Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com>
Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ib7f73a0b6de188982a09040f7739dc46be3cb1de
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: feature
- replace functions for prefixes attached to interfaces
- add ip_interface.[ch] to consoldate the functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9c0c39c09dbf80ea1aadefee02c9bd16f094b6ad
|
|
Type: feature
Change-Id: I85f6ec77187a4983c66c5e22fd39fbb2cef82902
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Merge two mildly incompatible static inlines, and rename the results
vnet_calc_checksums_inline (...).
The resulting inline has three additional parameters: int is_ip4, int
is_ip6, and int with_gso. All calls manage to pass one or more as
compile-time constants, which causes a certain amount of code to
disappear in each instantiation.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I1a2a0e353b9a7bca20bc81318e8c915617261e1a
|