summaryrefslogtreecommitdiffstats
path: root/src/vnet/adj/adj.c
AgeCommit message (Collapse)AuthorFilesLines
2019-03-26Callback functions must have the correct signatureNeale Ranns1-1/+3
Change-Id: I642823bdc3c7006a0b719ec1e3a9cd75b2b37253 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 8f215b4a03a98bf94931a09b23ab0fbd8ccd1ab9)
2018-12-07FIB recusrion loop checks traverse midchain adjacenciesNeale Ranns1-4/+70
if a tunnel's destination address is reachable through the tunnel (see example config belwo) then search for and detect a recursion loop and don't stack the adjacency. Otherwise this results in a nasty surprise. DBGvpp# loop cre DBGvpp# set int state loop0 up DBGvpp# set int ip addr loop0 10.0.0.1/24 DBGvpp# create gre tunnel src 10.0.0.1 dst 1.1.1.1 DBGvpp# set int state gre0 up DBGvpp# set int unnum gre0 use loop0 DBGvpp# ip route 1.1.1.1/32 via gre0 DBGvpp# sh ip fib 1.1.1.1 ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:default-route:1, ] 1.1.1.1/32 fib:0 index:11 locks:4 <<< this is entry #11 src:CLI refs:1 entry-flags:attached, src-flags:added,contributing,active, path-list:[14] locks:2 flags:shared,looped, uPRF-list:12 len:1 itfs:[2, ] path:[14] pl-index:14 ip4 weight=1 pref=0 attached-nexthop: oper-flags:recursive-loop,resolved, cfg-flags:attached, 1.1.1.1 gre0 (p2p) [@0]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: <<<< and the midchain forwards via entry #11 [@2]: dpo-drop ip4 src:recursive-resolution refs:1 src-flags:added, cover:-1 forwarding: unicast-ip4-chain [@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[0:0]] [0] [@6]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 DBGvpp# sh adj 1 [@1] ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 flags:midchain-ip-stack midchain-looped <<<<< this is a loop counts:[0:0] locks:4 delegates: children: {path:14} Change-Id: I39b82bd1ea439be4611c88b130d40289fa0c1b59 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-2/+2
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-01Add adjacency counters to the stats segmentNeale Ranns1-2/+6
Change-Id: I6b59df939c9daf40e261d73d19f500bd90abe6ff Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-1/+1
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-07-20IP directed broadcastNeale Ranns1-0/+8
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-22/+5
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns1-1/+3
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-2/+16
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-16/+2
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-20FIB Interpose SourceNeale Ranns1-4/+8
The interpose source allows the source/provider to insert/interpose a DPO in the forwarding chain of the FIB entry ahead of the forwarding provided by the next best source. For example if the API source (i.e the 'control plane') has provided an adjacency for forwarding, then an interpose source (e.g. a monitoring service) couold interpose a replicatte DPO to copy the traffic to another location AND forward using the API's adjacency. To use the interose feature an existing source (i.e FIB_SOURCE_PLUGIN_HI) cn specifiy as a flag FIB_ENTRY_FLAG_INTERPOSE and provide a DPO to interpose. One might also consider using interpose in conjunction with FIB_ENTRY_FLAG_COVER_INHERIT to ensure the interpose object affects all prefixes in the sub-tree. Change-Id: I8b2737b985f8f7c08123406d0491881def347b52 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-19Adjacency Delegate updatesNeale Ranns1-25/+3
- Register new type (for use from puglins) - Memory for delegate is provided by delegate provider Change-Id: I5ece86b1fe84e3028a5c853871476c4ba015b2eb Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-16Adj: VFTs for adjacency sub-blocksOle Troan1-1/+3
Change-Id: I85602b0178315023bb512babdd5b7dd4263a322d Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Revert "Adj: VFTs for adjacency sub-blocks"Ole Trøan1-3/+1
This reverts commit a44b015aa012d3b07ed873925d47c6d5955b7dd2. Change-Id: I2d76bc0844f58e5ddf3f3a4326b86076f46e3751 Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Adj: VFTs for adjacency sub-blocksOle Troan1-1/+3
Change-Id: I19390f87343bacea84b49fc5d08af38875fdafdd Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-12Improve MTU handlingNeale Ranns1-0/+37
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko1-0/+10
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-05-23Labelled attached paths via an MPLS tunnelNeale Ranns1-0/+1
Change-Id: Ic86617c9c3217122043656ce2ea70bb106df5b2d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-11Remove usued, redundant and deprecated code from lookup.hNeale Ranns1-3/+0
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-2/+11
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06BFD-FIB interactionsNeale Ranns1-4/+47
- single-hop BFD: attach a delegate to the appropriate adjacency - multi-hop BFD [not supported yet]: attach a delegate to the FIB entry. adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it. For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic). Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-2/+1
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29Mtrie optimisationsNeale Ranns1-12/+0
1 - make the default route non-special, i.e. like any other less specific route. Consequently, all buckets have a valid valid index of either a leaf or a ply. Checks for special indeices in the data-path can thus be removed. 2 - since all leaves are now 'real' i.e. they represent a real load-balance object, to tell if a ply slot is 'empty' requeirs chekcing that the prefix length of the leaf occupying the slot is slot than the minium value for that ply. 3 - when removing a leaf find the cover first, then recurse down the ply and replace the old leaf with the cover. This saves us a ply walk. Change-Id: Idd523019e8bb1b6ef527b1f5279a5e24bcf18332 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-27Mcast rewrite no memcpyNeale Ranns1-1/+1
use a 32bit mask in the adjacency to AND with the IP address and OR into the rewrite. Change-Id: I80b0f246c18fd74f3e43c5d49e25833412f34665 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Cache a 'has-features' flag on the adjacency for faster access. Reclaim the ↵Neale Ranns1-10/+72
node_index memeber from the rewrite for space - this is only used for formtting before: ip4-rewrite * * * * 2.66e1 256.00 after: ip4-rewrite * * * * 2.40e1 256.00 Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6 Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
2017-03-07make per-adj counters configurableNeale Ranns1-28/+93
Change-Id: Ifdd2b204ecf7d855f1269c11224b9c825311904d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns1-22/+0
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-2/+9
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-25[re]Enable per-Adjacency/neighbour countersNeale Ranns1-0/+4
Change-Id: I953b3888bbc6d8a5f53f684a5edc8742b382f323 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+454
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>