aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/adj/adj.h
AgeCommit message (Collapse)AuthorFilesLines
2019-09-25fib: fix some typos in fib/mtrieLijian.Zhang1-6/+6
Type: fix Change-Id: I1af0e4a9bc23a3b6b6d3a74df093801ab6cae1f8 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-09-23fib: do not dump no-longer valid adjacenciesBenoît Ganne1-1/+7
In some cases, we can refer to no-longer adjacencies (eg. in traces). Do not dump them in this case as they are probably incorrect (memory can be reused). Type: fix Change-Id: Ib653ba066bb6595ec6ec37d313a3124bce0eeed3 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2018-12-07FIB recusrion loop checks traverse midchain adjacenciesNeale Ranns1-5/+58
if a tunnel's destination address is reachable through the tunnel (see example config belwo) then search for and detect a recursion loop and don't stack the adjacency. Otherwise this results in a nasty surprise. DBGvpp# loop cre DBGvpp# set int state loop0 up DBGvpp# set int ip addr loop0 10.0.0.1/24 DBGvpp# create gre tunnel src 10.0.0.1 dst 1.1.1.1 DBGvpp# set int state gre0 up DBGvpp# set int unnum gre0 use loop0 DBGvpp# ip route 1.1.1.1/32 via gre0 DBGvpp# sh ip fib 1.1.1.1 ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:default-route:1, ] 1.1.1.1/32 fib:0 index:11 locks:4 <<< this is entry #11 src:CLI refs:1 entry-flags:attached, src-flags:added,contributing,active, path-list:[14] locks:2 flags:shared,looped, uPRF-list:12 len:1 itfs:[2, ] path:[14] pl-index:14 ip4 weight=1 pref=0 attached-nexthop: oper-flags:recursive-loop,resolved, cfg-flags:attached, 1.1.1.1 gre0 (p2p) [@0]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: <<<< and the midchain forwards via entry #11 [@2]: dpo-drop ip4 src:recursive-resolution refs:1 src-flags:added, cover:-1 forwarding: unicast-ip4-chain [@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[0:0]] [0] [@6]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 DBGvpp# sh adj 1 [@1] ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 flags:midchain-ip-stack midchain-looped <<<<< this is a loop counts:[0:0] locks:4 delegates: children: {path:14} Change-Id: I39b82bd1ea439be4611c88b130d40289fa0c1b59 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-0/+10
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-6/+0
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-21Adj Delegates; don't store raw pointersNeale Ranns1-1/+1
... you'd think I'd have leanred by now... Change-Id: I65c54feb2ec016baa07ed96c81ab8f60277c3418 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-19Adjacency Delegate updatesNeale Ranns1-1/+1
- Register new type (for use from puglins) - Memory for delegate is provided by delegate provider Change-Id: I5ece86b1fe84e3028a5c853871476c4ba015b2eb Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-12Improve MTU handlingNeale Ranns1-0/+6
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-30Allow the provider of a midchain adjacency to pass context data that is ↵Neale Ranns1-1/+6
returned in the fixup function Change-Id: I458e6e03b03e27775df33a2fd302743126d6ac44 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+6
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06BFD-FIB interactionsNeale Ranns1-0/+15
- single-hop BFD: attach a delegate to the appropriate adjacency - multi-hop BFD [not supported yet]: attach a delegate to the FIB entry. adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it. For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic). Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-2/+218
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Cache a 'has-features' flag on the adjacency for faster access. Reclaim the ↵Neale Ranns1-0/+6
node_index memeber from the rewrite for space - this is only used for formtting before: ip4-rewrite * * * * 2.66e1 256.00 after: ip4-rewrite * * * * 2.40e1 256.00 Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6 Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
2017-03-07make per-adj counters configurableNeale Ranns1-0/+15
Change-Id: Ifdd2b204ecf7d855f1269c11224b9c825311904d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-1/+0
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+122
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>