aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/adj/adj_midchain.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-01fib: Move the adjacency midchain nodes into a separate fileNeale Ranns1-229/+0
Type: refactor It's only the nodes that require compiling for each arch, Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ibb2bfc756001735cc10ef0fd8db7e8b8358cf8e2
2021-02-15ip: Path MTUNeale Ranns1-0/+1
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-02-15fib: Always honour flow hash flagNeale Ranns1-1/+16
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Id7b27edf3712aaa3c277e752b9ca78bb91d184a1
2020-12-08fib: Adjacency flag for midchain to perfom flow hash (on inner packet)Neale Ranns1-24/+36
Type: feature Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I964afd9266645de5c87d49c58ce6b48c2c18f97f
2020-10-28misc: Break the big IP header files to improve compile timeNeale Ranns1-0/+2
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
2020-08-06misc: harmonize namesDave Barach1-1/+1
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
2020-05-13feature: Config end nodes are user specificNeale Ranns1-5/+5
Type: fix it is possible for a user to change the end node of a feature arc, but this change should only apply to that 'instnace' of the arc, not all arcs. for example, if a tunnel has its ipx-output end node changed to adj-midchain-tx, this shouldn't affect all ipx-output arcs. obviously... Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I41daea7ba6907963e42140307d065c8bcfdcb585
2020-05-04fib: midchain adjacency optimisationsNeale Ranns1-295/+251
Type: improvement - inline some common encap fixup functions into the midchain rewrite node so we don't incur the cost of the virtual function call - change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header - add adj-midchain-tx to multiarch sources - don't run adj-midchain-tx as a feature, instead put this node as the adj's next and at the end of the feature arc. - cache the feature arc config index (to save the cache miss going to fetch it) - don't check if features are enabled when taking the arc (since we know they are) the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc) for IPSec: - don't run esp_encrypt as a feature, instead when required insert this node into the adj's next and into the end of the feature arc. this implies that encrypt is always 'the last feature' run, which is symmetric with decrypt always being the first. - esp_encrpyt for tunnels has adj-midchain-tx as next node Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-20fib: adjacency midchain teardown (VPP-1841)Neale Ranns1-3/+35
Type: fix Change-Id: I57f8bfbce4feed9d2775875cb8b1b729a47900a4 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 24064d02aa9810ebc64c16dc778a179bb0ef5483)
2020-02-03fib: invalid check for adj types.Neale Ranns1-1/+1
Type: fix coverity found invalid logic. Change-Id: Ic9144ac805a4e5a18aa299794fedda044dcb65fe Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-01-27ipip: Multi-point interfaceNeale Ranns1-6/+5
Type: feature plus fixes for gre Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
2019-08-07fib tests: IP multicast over GRENeale Ranns1-0/+1
Type: feature Change-Id: I1632ff23b1bf6d91aa3406c95ebd6ef0aa595f35 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28IPSEC: run encrpyt as a feautre on the tunnelNeale Ranns1-17/+5
Change-Id: I6527e3fd8bbbca2d5f728621fc66b3856b39d505 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-4/+4
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-07FIB recusrion loop checks traverse midchain adjacenciesNeale Ranns1-3/+121
if a tunnel's destination address is reachable through the tunnel (see example config belwo) then search for and detect a recursion loop and don't stack the adjacency. Otherwise this results in a nasty surprise. DBGvpp# loop cre DBGvpp# set int state loop0 up DBGvpp# set int ip addr loop0 10.0.0.1/24 DBGvpp# create gre tunnel src 10.0.0.1 dst 1.1.1.1 DBGvpp# set int state gre0 up DBGvpp# set int unnum gre0 use loop0 DBGvpp# ip route 1.1.1.1/32 via gre0 DBGvpp# sh ip fib 1.1.1.1 ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:default-route:1, ] 1.1.1.1/32 fib:0 index:11 locks:4 <<< this is entry #11 src:CLI refs:1 entry-flags:attached, src-flags:added,contributing,active, path-list:[14] locks:2 flags:shared,looped, uPRF-list:12 len:1 itfs:[2, ] path:[14] pl-index:14 ip4 weight=1 pref=0 attached-nexthop: oper-flags:recursive-loop,resolved, cfg-flags:attached, 1.1.1.1 gre0 (p2p) [@0]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: <<<< and the midchain forwards via entry #11 [@2]: dpo-drop ip4 src:recursive-resolution refs:1 src-flags:added, cover:-1 forwarding: unicast-ip4-chain [@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[0:0]] [0] [@6]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 DBGvpp# sh adj 1 [@1] ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 flags:midchain-ip-stack midchain-looped <<<<< this is a loop counts:[0:0] locks:4 delegates: children: {path:14} Change-Id: I39b82bd1ea439be4611c88b130d40289fa0c1b59 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-30SIXRD: fix post introduction of the directed subnet broadcastNeale Ranns1-1/+2
Change-Id: I9ce801e9b257eaa6be0cbe2ad3bfe630717f8c67 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-16Allow providers to override glean behaviourNeale Ranns1-3/+6
and update glean address on local interface MAC change Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-15Revert "Allow interface types to override glean adjacency behaivour"Ole Trøan1-3/+2
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f. Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Allow interface types to override glean adjacency behaivourNeale Ranns1-2/+3
update the glean adj on a local interface MAC change Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-30Allow the provider of a midchain adjacency to pass context data that is ↵Neale Ranns1-1/+4
returned in the fixup function Change-Id: I458e6e03b03e27775df33a2fd302743126d6ac44 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko1-0/+1
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-08-21PPPoE usses a midchain adjacency stack on an interface-tx DPONeale Ranns1-35/+91
1) introduce an interface-tx DPO. This is a simple wrapper around a sw_if_index. enhance DPO stacking functions to allow per-instance next-nodes and hence allow children to stack onto the interface per-instance tx node and not on 'interface-output'. 2) update PPPoE code to use ta midchain stack on a interface-tx DPO of the encap-interface. This remove the need for pppoe_encap node (which is replaced by the adj-midchain-tx) and interface-output node is no longer used (see above). Since PPPoE encap node is no longer needed, the PPPoE seesion does not need to be retrieved in the data-path, hence the cahce misses are removed. Change-Id: Id8b40f53daa14889a9c51d802e14fed7fba4399a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-21/+41
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-4/+4
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-9/+16
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Cache a 'has-features' flag on the adjacency for faster access. Reclaim the ↵Neale Ranns1-3/+1
node_index memeber from the rewrite for space - this is only used for formtting before: ip4-rewrite * * * * 2.66e1 256.00 after: ip4-rewrite * * * * 2.40e1 256.00 Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6 Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
2017-02-16Add NSH load-balance and drop DPOFlorin Coras1-0/+6
Also adds missing gpe nsh address type functions. Change-Id: I3353a23c0518da9ce3b221ddf8c5bd0364930154 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-13Basic support for LISP-GPE encapsulated NSH packetsFlorin Coras1-0/+20
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+559
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>