summaryrefslogtreecommitdiffstats
path: root/src/vnet/adj/adj_nbr.c
AgeCommit message (Collapse)AuthorFilesLines
2018-07-20IP directed broadcastNeale Ranns1-0/+5
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-1/+1
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns1-1/+2
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-17tcp: handle link-local addressesFlorin Coras1-1/+1
Change-Id: I9ede6bc861350c7d9e78fa4d96cd584c2816d06f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-04-25Adjacency walk more scalableNeale Ranns1-50/+25
When walking all adjacencies for a given {next-hop,interface} instead of walking all the adjacencies on that interface and matching the next-hop (which is O(n) in the number of adjacencies on that link, find all instances of an adjacency with any link-type and wtih that {next-hop,interfacE} pair: this is O(1). Change-Id: Ic80399fc9e93c8df111379c039e592d8cafbab18 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-30bond: show trace causes a crash if the interface is deletedSteven1-4/+2
For the debug image, if the interface is removed and the trace was collected prior to the interface delete, show trace may cause a crash. This is because vnet_get_sw_interface_name and vnet_get_sup_hw_interface are not safe if the interface is deleted. The fix is to use format_vnet_sw_if_index_name if all we need is to get the interface name in the trace to display. It would show "DELETED" which is better than a crash. Change-Id: I912402d3e71592ece9f49d36c8a6b7af97f3b69e Signed-off-by: Steven <sluong@cisco.com>
2018-02-16Allow providers to override glean behaviourNeale Ranns1-15/+0
and update glean address on local interface MAC change Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-15Revert "Allow interface types to override glean adjacency behaivour"Ole Trøan1-0/+15
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f. Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Allow interface types to override glean adjacency behaivourNeale Ranns1-15/+0
update the glean adj on a local interface MAC change Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko1-0/+2
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-04-07MPLS McastNeale Ranns1-2/+0
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-4/+4
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-27Fix output feature processing (VPP-670)AkshayaNadahalli1-7/+6
Addressed comments. Change-Id: Ic7d863ea4126f5046986b661db45d26bcce2068f Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
2017-03-27Fix output feature processing (VPP-670)AkshayaNadahalli1-0/+42
Change-Id: Ia9bab28fb5341712a7d984bb343074ca22d05aab Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
2017-03-17Cache a 'has-features' flag on the adjacency for faster access. Reclaim the ↵Neale Ranns1-3/+1
node_index memeber from the rewrite for space - this is only used for formtting before: ip4-rewrite * * * * 2.66e1 256.00 after: ip4-rewrite * * * * 2.40e1 256.00 Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6 Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-1/+1
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+1087
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>