aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/adj
AgeCommit message (Collapse)AuthorFilesLines
2021-09-13ip-neighbor: Handle local MAC address change for incomplete adjacenciesNeale Ranns3-8/+50
Type: fix When the local MAC address of an interface changes the rewrite strings of all adjacency types need to be updated - this patch fixes the missing case of incomplete adjacencies. I moved the update of all adj types into the adj module, since if the complete adjs were done by the ip-neighbour module and incomplete ones by adj module, that would mean two walks of the adj DB, as it is not possible to walk only a specific type. UT is updated to include the missing case. Signed-off-by: Neale Ranns <neale@graphiant.com> Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com> Change-Id: I36af94976c645bdd0d4d3bc0093b24d7d077e9d7
2021-06-08fib: make sure adj is valid during walkBenoît Ganne1-0/+3
The adj can be deleted during fib_walk_sync(), make sure it can happen only after clearing the SYNC_WALK_ACTIVE flag. Type: fix Change-Id: I68be00e9602e2783d9dced71c51547c38b7e8a00 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-04-01fib: Move the adjacency midchain nodes into a separate fileNeale Ranns4-232/+249
Type: refactor It's only the nodes that require compiling for each arch, Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ibb2bfc756001735cc10ef0fd8db7e8b8358cf8e2
2021-03-05fib: format function for adjacency flagsNeale Ranns2-0/+18
Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ib01ed3231321f0f38c4b1deb885c4cf718cc0147
2021-02-24fib: fix sa selection for fib routed destinationsJúlius Milan1-4/+14
The move from ip4(6)_src_address_for_packet to fib_sas4(6)_get changed the behavior, so that the new looked only to adjacent gleans. This caused a problem for destinations routed according to FIB table. To reproduce: vpp# create tap vpp# set interface state tap0 up vpp# set interface ip address tap0 192.168.11.1/24 vpp# ip route add 192.168.20.0/24 via 192.168.11.2 linux$ sudo ip addr add 192.168.20.1/24 dev lo linux$ sudo ip link set tap0 up linux$ sudo ip addr add 192.168.11.2/24 dev tap0 vpp# ping 192.168.20.1 Failed: no source address for egress interface Type: fix Signed-off-by: Július Milan <julius.milan@pantheon.tech> Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I22899f4dbbf8c1c85ccce72f801b92c183195b5d
2021-02-15ip: Path MTUNeale Ranns8-1/+63
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-02-15fib: Always honour flow hash flagNeale Ranns2-1/+18
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Id7b27edf3712aaa3c277e752b9ca78bb91d184a1
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-3/+3
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-08fib: Adjacency flag for midchain to perfom flow hash (on inner packet)Neale Ranns4-27/+74
Type: feature Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I964afd9266645de5c87d49c58ce6b48c2c18f97f
2020-12-08fib: Source Address SelectionNeale Ranns5-75/+269
Type: feature Use the FIB to provide SAS (in so far as it is today) - Use the glean adjacency as the record of the connected prefixes = there's a glean per-{interface, protocol, connected-prefix} - Keep the glean up to date with whatever the recieve host prefix is (since it can change) Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
2020-10-28misc: Break the big IP header files to improve compile timeNeale Ranns1-0/+2
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
2020-09-02fib: fix ADJ_NBR_ITF_OK param erroryedg1-1/+1
Type: fix Signed-off-by: yedonggang <yedg@wangsu.com> Change-Id: I3bf67070ed01df40626f3b90f2762158b6c3ce05
2020-09-01fib: detect wrong adj neighbour bugsBenoît Ganne1-0/+23
Type: improvement Change-Id: Ie063ee0a0c59a9ad632200ce2b23703bc0d936e6 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-08-06misc: harmonize namesDave Barach3-7/+7
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
2020-06-05fib: fix adj pool expand casesDave Barach1-1/+24
adj_alloc (...) is not thread safe when the adj pool or combined counter vectors expand. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I55710de6ecc083b7434e11798659cca9250c9131
2020-05-29fib: Safe adj walkNeale Ranns1-8/+15
Type: fix the hash walk does not give the same guarantees as the bihash so walk in a safe manner. Change-Id: Idfe48c3a84ab3a341d887f7d196bc81ba34ae8b0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-05-26fib: Use basic hash for adjacency neighbour tableNeale Ranns1-82/+42
Type: improvement a bihash per-interface used too much memory. Change-Id: I447bb66c0907e1632fa5d886a3600e518663c39e Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-05-13feature: Config end nodes are user specificNeale Ranns1-5/+5
Type: fix it is possible for a user to change the end node of a feature arc, but this change should only apply to that 'instnace' of the arc, not all arcs. for example, if a tunnel has its ipx-output end node changed to adj-midchain-tx, this shouldn't affect all ipx-output arcs. obviously... Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I41daea7ba6907963e42140307d065c8bcfdcb585
2020-05-04fib: midchain adjacency optimisationsNeale Ranns12-345/+483
Type: improvement - inline some common encap fixup functions into the midchain rewrite node so we don't incur the cost of the virtual function call - change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header - add adj-midchain-tx to multiarch sources - don't run adj-midchain-tx as a feature, instead put this node as the adj's next and at the end of the feature arc. - cache the feature arc config index (to save the cache miss going to fetch it) - don't check if features are enabled when taking the arc (since we know they are) the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc) for IPSec: - don't run esp_encrypt as a feature, instead when required insert this node into the adj's next and into the end of the feature arc. this implies that encrypt is always 'the last feature' run, which is symmetric with decrypt always being the first. - esp_encrpyt for tunnels has adj-midchain-tx as next node Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-04-10fib: fix adjacency cli command issueShivaShankarK1-3/+1
Type: fix Signed-off-by: ShivaShankarK <shivaashankar1204@gmail.com> Change-Id: I193023705003e664c50487fdfaa42b813604a078
2020-02-21ipsec: IPSec protection for multi-point tunnel interfacesNeale Ranns2-4/+3
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Iaba2ab11bfaa1c8db4023434e3043ac39500f938
2020-02-20fib: adjacency midchain teardown (VPP-1841)Neale Ranns3-5/+40
Type: fix Change-Id: I57f8bfbce4feed9d2775875cb8b1b729a47900a4 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 24064d02aa9810ebc64c16dc778a179bb0ef5483)
2020-02-03fib: invalid check for adj types.Neale Ranns1-1/+1
Type: fix coverity found invalid logic. Change-Id: Ic9144ac805a4e5a18aa299794fedda044dcb65fe Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-03fib: refresh adj pointer after fib_walk_sync due to possible reallocSteven Luong1-0/+6
fib_walk_sync may call adj_alloc which may cause adj_pool to expand. When that happens, any previous frame which still use the old adj pointer needs to refresh. Failure to do so may access or update to the old adj memory unintentionally and crash mysteriously. Type: fix Ticket: VPPSUPP-54 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I173dec4c5ce81c6e26c4fe011b894a7345901b24
2020-01-30fib: fix typos in doxygenPaul Vinciguerra1-10/+10
cleaned up some trivial typo's while reading through adj.h Type: docs Change-Id: I1b6cd815dc10ed3da8db2024b3e015e076235d50 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-01-27ipip: Multi-point interfaceNeale Ranns4-18/+33
Type: feature plus fixes for gre Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
2020-01-27fib: Reload the adj after possible realloc (VPP-1822)Neale Ranns1-0/+1
Type: fix Fixes: 418b225931634f6d113d2971cb9550837d69929d Change-Id: Ia5f4ea24188c4f3de87e06a7fd07b40bcb47cfc1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-01-22fib: Adjacency realloc during rewrite update walk (VPP-1822)Neale Ranns1-4/+4
Type: fix Change-Id: I0e826284c50713d322ee7943d87fd3363cfbdfbc Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-01-09misc: fix feature description spellingOle Troan1-2/+1
Type: docs Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I46856db81d42c3f10c03a7bf9a245cc998cd8a01
2020-01-03fib: add adjacency feature.yamlNeale Ranns1-0/+24
Type: docs Change-Id: I6cdfbae5a0eab8a69dfa2ae054945c510a3c63f6 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns5-15/+24
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17fib: Adjacency walk fix for IPv6Neale Ranns1-1/+1
Type: fix Change-Id: Id3a1950e49d5eb1883af06a14df97e98f55162a8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-16vppinfra: bihash walk cb typedef and continue/stop controlsNeale Ranns1-3/+6
Type: feature Change-Id: I28f7a658be3f3beec9ea32635b60d1d3a10d9b06 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-15fib: Adjacency creation notifications for dlegatesNeale Ranns6-1/+29
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3feddfe44dee528b9ca05aa0150e9423306ae49d
2019-12-03fib: constify the adjacency in the rewrite nodesNeale Ranns2-4/+4
Type: refactor Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3aad20b35d89fc541fdf185096d71ca12b09a6e2
2019-12-03fib feature: Code mechanics to decouple dependency of feature on adjNeale Ranns2-8/+5
Type: refactor Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I1d8b88fe1eefc850865297b4f025b97e6373a6bd
2019-11-26fib: reduce save_rewrite_length to u8Klement Sekera2-7/+9
This is a preparation step for migrating NAT to use SVR (shallow virtual reassembly) to conserve space in vnet_buffer. Since max rewrite length is currently pre-data size (128), u8 is sufficient to hold that value. Type: refactor Change-Id: I5374bb396e178245b870cb0bbf1370d2a54230bc Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-16fib: fix use-after-free for interface adj removalBenoît Ganne1-0/+3
Type: fix Change-Id: I82308e368d14d84f5970dad229bdcf2de7d1839d Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-25fib: fix some typos in fib/mtrieLijian.Zhang1-6/+6
Type: fix Change-Id: I1af0e4a9bc23a3b6b6d3a74df093801ab6cae1f8 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-09-23fib: do not dump no-longer valid adjacenciesBenoît Ganne3-2/+17
In some cases, we can refer to no-longer adjacencies (eg. in traces). Do not dump them in this case as they are probably incorrect (memory can be reused). Type: fix Change-Id: Ib653ba066bb6595ec6ec37d313a3124bce0eeed3 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-07fib tests: IP multicast over GRENeale Ranns1-0/+1
Type: feature Change-Id: I1632ff23b1bf6d91aa3406c95ebd6ef0aa595f35 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24fib: remove unused input parameterZhiyong Yang1-5/+2
Type: style Change-Id: I2a21076fffaeb5726be80356aaffc9fea3d95850 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-07-23api: binary api cleanupDave Barach1-1/+1
Multiple API message handlers call vnet_get_sup_hw_interface(...) without checking the inbound sw_if_index. This can cause a pool_elt_at_index ASSERT in a debug image, and major disorder in a production image. Given that a number of places are coded as follows, add an "api_visible_or_null" variant of vnet_get_sup_hw_interface, which returns NULL given an invalid sw_if_index, or a hidden sw interface: - hw = vnet_get_sup_hw_interface (vnm, sw_if_index); + hw = vnet_get_sup_hw_interface_api_visible_or_null (vnm, sw_if_index); if (hw == NULL || memif_device_class.index != hw->dev_class_index) return clib_error_return (0, "not a memif interface"); Rename two existing xxx_safe functions -> xxx_or_null to make it obvious what they return. Type: fix Change-Id: I29996e8d0768fd9e0c5495bd91ff8bedcf2c5697 Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-19fib: FIB Entry trackingNeale Ranns1-9/+7
Instead of all clients directly RR sourcing the entry they are tracking, use a deidcated 'tracker' object. This tracker object is a entry delegate and a child of the entry. The clients are then children of the tracker. The benefit of this aproach is that each time a new client tracks the entry it doesn't RR source it. When an entry is sourced all its children are updated. Thus, new clients tracking an entry is O(n^2). With the tracker as indirection, the entry is sourced only once. Type: feature Change-Id: I5b80bdda6c02057152e5f721e580e786cd840a3b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-16init / exit function orderingDave Barach1-7/+7
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-13remove dead code in rewrite.cNeale Ranns1-26/+0
Change-Id: Ib34ca76fcc5e85cb3cc646ffc7be208b8e757cba Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-16ADJ: crash in format/show (VPP-1648)Neale Ranns1-1/+1
Change-Id: I26279c19b879e59c68fda31426fe42dae62a858d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-08fixing typosJim Thompson2-3/+3
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-03-28IPSEC: run encrpyt as a feautre on the tunnelNeale Ranns1-17/+5
Change-Id: I6527e3fd8bbbca2d5f728621fc66b3856b39d505 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra8-27/+27
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>